Refine
H-BRS Bibliography
- yes (105) (remove)
Departments, institutes and facilities
- Fachbereich Angewandte Naturwissenschaften (39)
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (25)
- Fachbereich Wirtschaftswissenschaften (22)
- Fachbereich Informatik (18)
- Fachbereich Sozialpolitik und Soziale Sicherung (15)
- Fachbereich Ingenieurwissenschaften und Kommunikation (12)
- Institut für funktionale Gen-Analytik (IFGA) (10)
- Institut für Sicherheitsforschung (ISF) (6)
- Institute of Visual Computing (IVC) (5)
- Internationales Zentrum für Nachhaltige Entwicklung (IZNE) (4)
Document Type
- Article (105) (remove)
Year of publication
- 2019 (105) (remove)
Keywords
- lignin (4)
- Extrusion blow molding (2)
- antimicrobial activity (2)
- bone tissue engineering (2)
- chemometrics (2)
- ACPYPE (1)
- ANN controller (1)
- Accuracy (1)
- Acetylcholinesterase (AChE) (1)
- Active healthy ageing (1)
The choice of suitable semiconducting metal oxide (MOX) gas sensors for the detection of a specific gas or gas mixture is time-consuming since the sensor’s sensitivity needs to be characterized at multiple temperatures to find its optimal operating conditions. To obtain reliable measurement results, it is very important that the power for the sensor’s integrated heater is stable, regulated and error-free (or error-tolerant). Especially the error-free requirement can be only be achieved if the power supply implements failure-avoiding and failure-detection methods. The biggest challenge is deriving multiple different voltages from a common supply in an efficient way while keeping the system as small and lightweight as possible. This work presents a reliable, compact, embedded system that addresses the power supply requirements for fully automated simultaneous sensor characterization for up to 16 sensors at multiple temperatures. The system implements efficient (avg. 83.3% efficiency) voltage conversion with low ripple output (<32 mV) and supports static or temperature-cycled heating modes. Voltage and current of each channel are constantly monitored and regulated to guarantee reliable operation. To evaluate the proposed design, 16 sensors were screened. The results are shown in the experimental part of this work.
Herein we report an update to ACPYPE, a Python3 tool that now properly converts AMBER to GROMACS topologies for force fields that utilize nondefault and nonuniform 1–4 electrostatic and nonbonded scaling factors or negative dihedral force constants. Prior to this work, ACPYPE only converted AMBER topologies that used uniform, default 1–4 scaling factors and positive dihedral force constants. We demonstrate that the updated ACPYPE accurately transfers the GLYCAM06 force field from AMBER to GROMACS topology files, which employs non-uniform 1–4 scaling factors as well as negative dihedral force constants. Validation was performed using β-d-GlcNAc through gas-phase analysis of dihedral energy curves and probability density functions. The updated ACPYPE retains all of its original functionality, but now allows the simulation of complex glycomolecular systems in GROMACS using AMBER-originated force fields. ACPYPE is available for download at https://github.com/alanwilter/acpype.
This paper proposes an approach to an ANN-based temperature controller design for a plastic injection moulding system. This design approach is applied to the development of a controller based on a combination of a classical ANN and integrator. The controller provides a fast temperature response and zero steady-state error for three typical heaters (bar, nozzle, and cartridge) for a plastic moulding system. The simulation results in Matlab Simulink software and in comparison to an industrial PID regulator have shown the advantages of the controller, such as significantly less overshoot and faster transient (compared to PID with autotuning) for all examined heaters. In order to verify the proposed approach, the designed ANN controller was implemented and tested using an experimental setup based on an STM32 board.
Lower back pain is one of the most prevalent diseases in Western societies. A large percentage of European and American populations suffer from back pain at some point in their lives. One successful approach to address lower back pain is postural training, which can be supported by wearable devices, providing real-time feedback about the user’s posture. In this work, we analyze the changes in posture induced by postural training. To this end, we compare snapshots before and after training, as measured by the Gokhale SpineTracker™. Considering pairs of before and after snapshots in different positions (standing, sitting, and bending), we introduce a feature space, that allows for unsupervised clustering. We show that resulting clusters represent certain groups of postural changes, which are meaningful to professional posture trainers.
The antiradical and antimicrobial activity of lignin and lignin-based films are both of great interest for applications such as food packaging additives. The polyphenolic structure of lignin in addition to the presence of O-containing functional groups is potentially responsible for these activities. This study used DPPH assays to discuss the antiradical activity of HPMC/lignin and HPMC/lignin/chitosan films. The scavenging activity (SA) of both binary (HPMC/lignin) and ternary (HPMC/lignin/chitosan) systems was affected by the percentage of the added lignin: the 5% addition showed the highest activity and the 30% addition had the lowest. Both scavenging activity and antimicrobial activity are dependent on the biomass source showing the following trend: organosolv of softwood > kraft of softwood > organosolv of grass. Testing the antimicrobial activities of lignins and lignin-containing films showed high antimicrobial activities against Gram-positive and Gram-negative bacteria at 35 °C and at low temperatures (0-7 °C). Purification of kraft lignin has a negative effect on the antimicrobial activity while storage has positive effect. The lignin release in the produced films affected the activity positively and the chitosan addition enhances the activity even more for both Gram-positive and Gram-negative bacteria. Testing the films against spoilage bacteria that grow at low temperatures revealed the activity of the 30% addition on HPMC/L1 film against both B. thermosphacta and P. fluorescens while L5 was active only against B. thermosphacta. In HPMC/lignin/chitosan films, the 5% addition exhibited activity against both B. thermosphacta and P. fluorescens.
Due to global ecological and economic challenges that have been correlated to the transition from fossil-based to renewable resources, fundamental studies are being performed worldwide to replace fossil fuel raw materials in plastic production. One aspect of current research is the development of lignin-derived polyols to substitute expensive fossil-based polyol components for polyurethane and polyester production. This article describes the synthesis of bioactive lignin-based polyurethane coatings using unmodified and demethylated Kraft lignins. Demethylation was performed to enhance the reaction selectivity toward polyurethane formation. The antimicrobial activity was tested according to a slightly modified standard test (JIS Z 2801:2010). Besides effects caused by the lignins themselves, triphenylmethane derivatives (brilliant green and crystal violet) were used as additional antimicrobial substances. Results showed increased antimicrobial capacity against Staphylococcus aureus. Furthermore, the coating color could be varied from dark brown to green and blue, respectively.
This work addresses the issue of finding an optimal flight zone for a side-by-side tracking and following Unmanned Aerial Vehicle(UAV) adhering to space-restricting factors brought upon by a dynamic Vector Field Extraction (VFE) algorithm. The VFE algorithm demands a relatively perpendicular field of view of the UAV to the tracked vehicle, thereby enforcing the space-restricting factors which are distance, angle and altitude. The objective of the UAV is to perform side-by-side tracking and following of a lightweight ground vehicle while acquiring high quality video of tufts attached to the side of the tracked vehicle. The recorded video is supplied to the VFE algorithm that produces the positions and deformations of the tufts over time as they interact with the surrounding air, resulting in an airflow model of the tracked vehicle. The present limitations of wind tunnel tests and computational fluid dynamics simulation suggest the use of a UAV for real world evaluation of the aerodynamic properties of the vehicle’s exterior. The novelty of the proposed approach is alluded to defining the specific flight zone restricting factors while adhering to the VFE algorithm, where as a result we were capable of formalizing a locally-static and a globally-dynamic geofence attached to the tracked vehicle and enclosing the UAV.
Eine Organisationspflichtverletzung des Arbeitgebers, aus der keine gesundheitsschädigende Einwirkung beim Versicherten resultiert, sondern nur eine Nothilfemaßnahme für eine berufsunabhängige Gesundheitsstörung unterbleibt, erfüllt insoweit nicht die Voraussetzungen eines Arbeitsunfalls. Das Fehlen eines Defibrillators an der Betriebsstätte begründet schon kein Organisationsverschulden des Arbeitgebers, denn die Vorhaltung eines Defibrillators zur Anwendung durch Laien ist nicht verpflichtend gesetzlich geregelt.
The complex nature of multifactorial diseases, such as Morbus Alzheimer, has produced a strong need to design multitarget-directed ligands to address the involved complementary pathways. We performed a purposive structural modification of a tetratarget small-molecule, that is contilisant, and generated a combinatorial library of 28 substituted chromen-4-ones. The compounds comprise a basic moiety which is linker-connected to the 6-position of the heterocyclic chromenone core. The syntheses were accomplished by Mitsunobu- or Williamson-type ether formations. The resulting library members were evaluated at a panel of seven human enzymes, all of which being involved in the pathophysiology of neurodegeneration. A concomitant inhibition of human acetylcholinesterase and human monoamine oxidase B, with IC50 values of 5.58 and 7.20 μM, respectively, was achieved with the dual-target 6-(4-(piperidin-1-yl)butoxy)-4H-chromen-4-one (7).
Scratch assays enable the study of the migration process of an injured adherent cell layer in vitro. An apparatus for the reproducible performance of scratch assays and cell harvesting has been developed that meets the requirements for reproducibility in tests as well as easy handling. The entirely autoclavable setup is divided into a sample translation and a scratching system. The translational system is compatible with standard culture dishes and can be modified to adapt to different cell culture systems, while the scratching system can be adjusted according to angle, normal force, shape, and material to adapt to specific questions and demanding substrates. As a result, a fully functional prototype can be presented. This system enables the creation of reproducible and clear scratch edges with a low scratch border roughness within a monolayer of cells. Moreover, the apparatus allows the collection of the migrated cells after scratching for further molecular biological investigations without the need for a second processing step. For comparison, the mechanical properties of manually performed scratch assays are evaluated.
This study presents a microindentation system which allows spatially resolved local as well as bulk viscoelastic material information to be obtained within one instrument. The microindentation method was merged with dynamic mechanical analysis (DMA) for a tungsten cone indenter. Three tungsten cone indenters were investigated: tungsten electrode, tungsten electrode + 2% lanthanum, and tungsten electrode + rare earth elements. Only the tungsten electrode + 2% lanthanum indenter showed the sinusoidal response, and its geometry remained unaffected by the repeated indentations. Complex moduli obtained from dynamic microindentation for high-density polyethylene, polybutylene terephthalate, polycarbonate, and thermoplastic polyurethane are in agreement with the literature. Additionally, by implementing a specially developed x-y-stage, this study showed that dynamic microindentation with a tungsten cone indenter was an adequate method to determine spatially resolved local viscoelastic surface properties.
Die Herausforderungen an die gesetzliche Rentenversicherung in Folge des Wandels in der Arbeitswelt
(2019)
Bioinspired stem cell-based hard tissue engineering includes numerous aspects: The synthesis and fabrication of appropriate scaffold materials, their analytical characterization, and guided osteogenesis using the sustained release of osteoinducing and/or osteoconducting drugs for mesenchymal stem cell differentiation, growth, and proliferation. Here, the effect of silicon- and silicate-containing materials on osteogenesis at the molecular level has been a particular focus within the last decade. This review summarizes recently published scientific results, including material developments and analysis, with a special focus on silicon hybrid bone composites. First, the sources, bioavailability, and functions of silicon on various tissues are discussed. The second focus is on the effects of calcium-silicate biomineralization and corresponding analytical methods in investigating osteogenesis and bone formation. Finally, recent developments in the manufacturing of Si-containing scaffolds are discussed, including in vitro and in vivo studies, as well as recently filed patents that focus on the influence of silicon on hard tissue formation.
Erfassung der N-Dynamik verschiedener Wirtschaftsdünger in Wintergerste und Senf im Dürrejahr 2018
(2019)
Geschäftsprozess-Management
(2019)
Der Unfallversicherungsträger kann bei der Ausgestaltung des Beitragsausgleichsverfahrens nach § 162 Abs. 1 SGB VII die dort genannten Berechnungselemente (Zahl, Schwere oder Aufwendungen der Versicherungsfälle) alternativ oder in Kombination miteinander verwenden und eine geänderte Satzungsregelung auch auf Unfälle anwenden, deren Folgen erst im Beitragsjahr die maßgeblichen Merkmale erfüllen.
In January 2015, German retail and industry jointly started a sector-wide initiative ("Initiative Tierwohl" - ITW) to improve animal welfare standards. The principle of the ITW is communicated mostly via the websites of ITW and its participating companies. However, uncertainty remained whether or not these websites provide the necessary information consumers need on the ITW products. Based on Schwartz's basic human values, different types of consumers were identified by a cluster analysis (ward-method, k-means). The results showed that depending on expressed meta‐values (Self-Transcendence/Openness to Change Self-Enhancement or Conservation), respondents had different specific information sources and needs. Online sources were rarely mentioned, the majority of consumers referred to brochures, flyers and interpersonal contacts.
Atmospheric aerosols affect the power production of solar energy systems. Their impact depends on both the atmospheric conditions and the solar technology employed. By being a region with a lack in power production and prone to high solar insolation, West Africa shows high potential for the application of solar power systems. However, dust outbreaks, containing high aerosol loads, occur especially in the Sahel, located between the Saharan desert in the north and the Sudanian Savanna in the south. They might affect the whole region for several days with significant effects on power generation. This study investigates the impact of atmospheric aerosols on solar energy production for the example year 2006 making use of six well instrumented sites in West Africa. Two different solar power technologies, a photovoltaic (PV) and a parabolic through (PT) power plant, are considered. The daily reduction of solar power due to aerosols is determined over mostly clear-sky days in 2006 with a model chain combining radiative transfer and technology specific power generation. For mostly clear days the local daily reduction of PV power (at alternating current) (PVAC) and PT power (PTP) due to the presence of aerosols lies between 13 % and 22 % and between 22 % and 37 %, respectively. In March 2006 a major dust outbreak occurred, which serves as an example to investigate the impact of an aerosol extreme event on solar power. During the dust outbreak, daily reduction of PVAC and PTP of up to 79 % and 100 % occur with a mean reduction of 20 % to 40 % for PVAC and of 32 % to 71 % for PTP during the 12 days of the event.
In mathematical modeling by means of performance models, the Fitness-Fatigue Model (FF-Model) is a common approach in sport and exercise science to study the training performance relationship. The FF-Model uses an initial basic level of performance and two antagonistic terms (for fitness and fatigue). By model calibration, parameters are adapted to the subject’s individual physical response to training load. Although the simulation of the recorded training data in most cases shows useful results when the model is calibrated and all parameters are adjusted, this method has two major difficulties. First, a fitted value as basic performance will usually be too high. Second, without modification, the model cannot be simply used for prediction. By rewriting the FF-Model such that effects of former training history can be analyzed separately – we call those terms preload – it is possible to close the gap between a more realistic initial performance level and an athlete's actual performance level without distorting other model parameters and increase model accuracy substantially. Fitting error of the preload-extended FF-Model is less than 32% compared to the error of the FF-Model without preloads. Prediction error of the preload-extended FF-Model is around 54% of the error of the FF-Model without preloads.
Intact Transition Epitope Mapping - Targeted High-Energy Rupture of Extracted Epitopes (ITEM-THREE)
(2019)
Epitope mapping, which is the identification of antigenic determinants, is essential for the design of novel antibody-based therapeutics and diagnostic tools. ITEM-THREE is a mass spectrometry-based epitope mapping method that can identify epitopes on antigens upon generating an immune complex in electrospray-compatible solutions by adding an antibody of interest to a mixture of peptides from which at least one holds the antibody's epitope. This mixture is nano-electrosprayed without purification. Identification of the epitope peptide is performed within a mass spectrometer that provides an ion mobility cell sandwiched in-between two collision cells and where this ion manipulation setup is flanked by a quadrupole mass analyzer on one side and a time-of-flight mass analyzer on the other side. In a stepwise fashion, immune-complex ions are separated from unbound peptide ions and dissociated to release epitope peptide ions. Immune complex-released peptide ions are separated from antibody ions and fragmented by collision induced dissociation. Epitope-containing peptide fragment ions are recorded, and mass lists are submitted to unsupervised data base search thereby retrieving both, the amino acid sequence of the epitope peptide and the originating antigen. ITEM-THREE was developed with antiTRIM21 and antiRA33 antibodies for which the epitopes were known, subjecting them to mixtures of synthetic peptides of which one contained the respective epitope. ITEM-THREE was then successfully tested with an enzymatic digest of His-tagged recombinant human β-actin and an antiHis-tag antibody, as well as with an enzymatic digest of recombinant human TNFα and an antiTNFα antibody whose epitope was previously unknown.
Lässt sich das erforderliche zeitlich begrenzte, von außen auf den Körper einwirkende Ereignis nicht im Vollbeweis sichern, fehlt es an der erforderlichen haftungsbegründenden Kausalität – mit der Folge, dass das geltend gemachte Unfallereignis nicht als Arbeitsunfall anzuerkennen ist. Bleibt unklar, welche Handlungen der Versicherte zum Zeitpunkt des Unfallereignisses vorgenommen hat, sind auch die Grundsätze des so genannten Anscheinsbeweises unanwendbar, weil ein typischer Geschehensablauf nicht nachweisbar ist.
Lignocellulose feedstock (LCF) provides a sustainable source of components to produce bioenergy, biofuel, and novel biomaterials. Besides hard and soft wood, so-called low-input plants such as Miscanthus are interesting crops to be investigated as potential feedstock for the second generation biorefinery. The status quo regarding the availability and composition of different plants, including grasses and fast-growing trees (i.e., Miscanthus, Paulownia), is reviewed here. The second focus of this review is the potential of multivariate data processing to be used for biomass analysis and quality control. Experimental data obtained by spectroscopic methods, such as nuclear magnetic resonance (NMR) and Fourier-transform infrared spectroscopy (FTIR), can be processed using computational techniques to characterize the 3D structure and energetic properties of the feedstock building blocks, including complex linkages. Here, we provide a brief summary of recently reported experimental data for structural analysis of LCF biomasses, and give our perspectives on the role of chemometrics in understanding and elucidating on LCF composition and lignin 3D structure.
The media is considered to be the fourth pillar in a democratic country. It acts as an effective control mechanism to check the other branches of the government. But this is only consequential when the media functions in an independent and transparent fashion with trained and neutral professionals who are aware of the accountability and consequences of their work. All these factors together would further the country as a democratic institution. Traditionally, it was legacy media responsible for a one-to-many communication process. Their goal was to provide information to the citizens. But this changed with development in technology and the use of social media in daily life. The internet brought with it new media formats which are easily accessible but also unstructured. These lowered barriers of entry in the media enabled citizens to become active participants in the communication process. As a result, these citizens developed a different relationship with the already existing media wherein they were not only the receivers to information but also co-producers. Real-time information allows users to communicate with each other and in turn widely generate public opinion on internet platforms. A many-to-many communication style emerged. While on the one hand, this type of discourse could be an opportunity for citizens to exercise their fundamental freedom of speech and expression, it is on the other hand, proving to have a detrimental effect in two parts: Lack of neutrality, polarized views and pre-existing misconceptions on the part of citizens as well as algorithms and formation of echo-chambers on the part of technology. Some questions arise in this scenario about the capability of citizen journalists, the duties they should adhere to along with the enjoyment of their rights and freedoms, the risks involved in an unchecked method of communication and the effect of citizen journalism in the democratic process.
The number of studies on work breaks and the importance of this subject is growing rapidly, with research showing that work breaks increase employees’ wellbeing and performance and workplace safety. However, comparing the results of work break research is difficult since the study designs and methods are heterogeneous and there is no standard theoretical model for work breaks. Based on a systematic literature search, this scoping review included a total of 93 studies on experimental work break research conducted over the last 30 years. This scoping review provides a first structured evaluation regarding the underlying theoretical framework, the variables investigated, and the measurement methods applied. Studies using a combination of measurement methods from the categories “self-report measures,” “performance measures,” and “physiological measures” are most common and to be preferred in work break research. This overview supplies important information for ergonomics researchers allowing them to design work break studies with a more structured and stronger theory-based approach. A standard theoretical model for work breaks is needed in order to further increase the comparability of studies in the field of experimental work break research in the future.
Miscanthus x giganteus Stem Versus Leaf-Derived Lignins Differing in Monolignol Ratio and Linkage
(2019)
As a renewable, Miscanthus offers numerous advantages such as high photosynthesis activity (as a C4 plant) and an exceptional CO2 fixation rate. These properties make Miscanthus very attractive for industrial exploitation, such as lignin generation. In this paper, we present a systematic study analyzing the correlation of the lignin structure with the Miscanthus genotype and plant portion (stem versus leaf). Specifically, the ratio of the three monolignols and corresponding building blocks as well as the linkages formed between the units have been studied. The lignin amount has been determined for M. x giganteus (Gig17, Gig34, Gig35), M. nagara (NagG10), M. sinensis (Sin2), and M. robustus (Rob4) harvested at different time points (September, December, and April). The influence of the Miscanthus genotype and plant component (leaf vs. stem) has been studied to develop corresponding structure-property relationships (i.e., correlations in molecular weight, polydispersity, and decomposition temperature). Lignin isolation was performed using non-catalyzed organosolv pulping and the structure analysis includes compositional analysis, Fourier transform infradred (FTIR), ultraviolet/visible (UV-Vis), hetero-nuclear single quantum correlation nuclear magnetic resonsnce (HSQC-NMR), thermogravimetric analysis (TGA), and pyrolysis gaschromatography/mass spectrometry (GC/MS). Structural differences were found for stem and leaf-derived lignins. Compared to beech wood lignins, Miscanthus lignins possess lower molecular weight and narrow polydispersities (<1.5 Miscanthus vs. >2.5 beech) corresponding to improved homogeneity. In addition to conventional univariate analysis of FTIR spectra, multivariate chemometrics revealed distinct differences for aromatic in-plane deformations of stem versus leaf-derived lignins. These results emphasize the potential of Miscanthus as a low-input resource and a Miscanthus-derived lignin as promising agricultural feedstock.
In the literature on occupational stress and recovery from work, several facets of thinking about work during off-job time have been conceptualized. However, research on the focal concepts is currently rather diffuse. In this study we take a closer look at the five most well-established concepts: (1) psychological detachment, (2) affective rumination, (3) problem-solving pondering, (4) positive work reflection, and (5) negative work reflection. More specifically, we scrutinized (1) whether the five facets of work-related rumination are empirically distinct, (2) whether they yield differential associations with different facets of employee well-being (burnout, work engagement, thriving, satisfaction with life, and flourishing), and (3) to what extent the five facets can be distinguished from and relate to conceptually similar constructs, such as irritation, worry, and neuroticism. We applied structural equation modeling techniques to cross-sectional survey data from 474 employees. Our results provide evidence for (1) five correlated, yet empirically distinct facets of work-related rumination. (2) Each facet yields a unique pattern of association with the eight aspects of employee well-being. For instance, detachment is strongly linked to satisfaction with life and flourishing. Affective rumination is linked particularly to burnout. Problem-solving pondering and positive work reflection yield the strongest links to work engagement. (3) The five facets of work-related rumination are distinct from related concepts, although there is a high overlap between (lower levels of) psychological detachment and cognitive irritation. Our study contributes to clarifying the structure of work-related rumination and extends the nomological network around different types of thinking about work during off-job time and employee well-being.
Healing of large bone defects requires implants or scaffolds that provide structural guidance for cell growth, differentiation, and vascularization. In the present work, an agarose-hydroxyapatite composite scaffold was developed that acts not only as a 3D matrix, but also as a release system. Hydroxyapatite (HA) was incorporated into the agarose gels in situ in various ratios by a simple procedure consisting of precipitation, cooling, washing, and drying. The resulting gels were characterized regarding composition, porosity, mechanical properties, and biocompatibility. A pure phase of carbonated HA was identified in the scaffolds, which had pore sizes of up to several hundred micrometers. Mechanical testing revealed elastic moduli of up to 2.8 MPa for lyophilized composites. MTT testing on Lw35human mesenchymal stem cells (hMSCs) and osteosarcoma MG-63 cells proved the biocompatibility of the scaffolds. Furthermore, scaffolds were loaded with model drug compounds for guided hMSC differentiation. Different release kinetic models were evaluated for adenosine 5′-triphosphate (ATP) and suramin, and data showed a sustained release behavior over four days.
Survival of patients with pediatric acute lymphoblastic leukemia (ALL) after allogeneic hematopoietic stem cell transplantation (allo-SCT) is mainly compromised by leukemia relapse, carrying dismal prognosis. As novel individualized therapeutic approaches are urgently needed, we performed whole-exome sequencing of leukemic blasts of 10 children with post–allo-SCT relapses with the aim of thoroughly characterizing the mutational landscape and identifying druggable mutations. We found that post–allo-SCT ALL relapses display highly diverse and mostly patient-individual genetic lesions. Moreover, mutational cluster analysis showed substantial clonal dynamics during leukemia progression from initial diagnosis to relapse after allo-SCT. Only very few alterations stayed constant over time. This dynamic clonality was exemplified by the detection of thiopurine resistance-mediating mutations in the nucleotidase NT5C2 in 3 patients’ first relapses, which disappeared in the post–allo-SCT relapses on relief of selective pressure of maintenance chemotherapy. Moreover, we identified TP53 mutations in 4 of 10 patients after allo-SCT, reflecting acquired chemoresistance associated with selective pressure of prior antineoplastic treatment. Finally, in 9 of 10 children’s post–allo-SCT relapse, we found alterations in genes for which targeted therapies with novel agents are readily available. We could show efficient targeting of leukemic blasts by APR-246 in 2 patients carrying TP53 mutations. Our findings shed light on the genetic basis of post–allo-SCT relapse and may pave the way for unraveling novel therapeutic strategies in this challenging situation.
Political Impact Management
(2019)
Bone tissue engineering is an ever-changing, rapidly evolving, and highly interdisciplinary field of study, where scientists try to mimic natural bone structure as closely as possible in order to facilitate bone healing. New insights from cell biology, specifically from mesenchymal stem cell differentiation and signaling, lead to new approaches in bone regeneration. Novel scaffold and drug release materials based on polysaccharides gain increasing attention due to their wide availability and good biocompatibility to be used as hydrogels and/or hybrid components for drug release and tissue engineering. This article reviews the current state of the art, recent developments, and future perspectives in polysaccharide-based systems used for bone regeneration.
The aim of this study was to investigate whether beneficial vacation effects can be strengthened and prolonged with a smartphone-based intervention. In a four-week longitudinal study among 79 Finnish teachers, we investigated the development of recovery, well-being, and job performance before, during, and after a one-week vacation in three groups: non-users (n = 51), passive (n = 18) and active (n = 10) users. Participants were instructed to actively use a recovery app (called Holidaily) and complete five digital questionnaires. Most recovery experiences and well-being indicators increased during the vacation. Job performance and concentration capacity showed no significant time effects. Among active app users, creativity at work increased from baseline to after the vacation, whereas among non-users it decreased and among passive users it decreased a few days after the vacation but increased again one and a half weeks after the vacation. The fading of beneficial vacation effects on negative affect seems to have been slower among active app users. Only few participants used the app actively. Still, results suggest that a smartphone-based recovery intervention may support beneficial vacation effects.
Treatment options for acute myeloid leukemia (AML) remain extremely limited and associated with significant toxicity. Nicotinamide phosphoribosyltransferase (NAMPT) is involved in the generation of NAD+ and a potential therapeutic target in AML. We evaluated the effect of KPT-9274, a p21-activated kinase 4/NAMPT inhibitor that possesses a unique NAMPT-binding profile based on in silico modeling compared with earlier compounds pursued against this target. KPT-9274 elicited loss of mitochondrial respiration and glycolysis and induced apoptosis in AML subtypes independent of mutations and genomic abnormalities. These actions occurred mainly through the depletion of NAD+, whereas genetic knockdown of p21-activated kinase 4 did not induce cytotoxicity in AML cell lines or influence the cytotoxic effect of KPT-9274. KPT-9274 exposure reduced colony formation, increased blast differentiation, and diminished the frequency of leukemia-initiating cells from primary AML samples; KPT-9274 was minimally cytotoxic toward normal hematopoietic or immune cells. In addition, KPT-9274 improved overall survival in vivo in 2 different mouse models of AML and reduced tumor development in a patient-derived xenograft model of AML. Overall, KPT-9274 exhibited broad preclinical activity across a variety of AML subtypes and warrants further investigation as a potential therapeutic agent for AML.
Bond graph software can simulate bond graph models without the user needing to manually derive equations. This offers the power to model larger and more complex systems than in the past. Multibond graphs (those with vector bonds) offer a compact model which further eases handling multibody systems. Although multibond graphs can be simulated successfully, the use of vector bonds can present difficulties. In addition, most qualitative, bond graph–based exploitation relies on the use of scalar bonds. This article discusses the main methods for simulating bond graphs of multibody systems, using a graphical software platform. The transformation between models with vector and scalar bonds is presented. The methods are then compared with respect to both time and accuracy, through simulation of two benchmark models. This article is a tutorial on the existing methods for simulating three-dimensional rigid and holonomic multibody systems using bond graphs and discusses the difficulties encountered. It then proposes and adapts methods for simulating this type of system directly from its bond graph within a software package. The value of this study is in giving practical guidance to modellers, so that they can implement the adapted method in software.
The application of Raman and infrared (IR) microspectroscopy is leading to hyperspectral data containing complementary information concerning the molecular composition of a sample. The classification of hyperspectral data from the individual spectroscopic approaches is already state-of-the-art in several fields of research. However, more complex structured samples and difficult measuring conditions might affect the accuracy of classification results negatively and could make a successful classification of the sample components challenging. This contribution presents a comprehensive comparison in supervised pixel classification of hyperspectral microscopic images, proving that a combined approach of Raman and IR microspectroscopy has a high potential to improve classification rates by a meaningful extension of the feature space. It shows that the complementary information in spatially co-registered hyperspectral images of polymer samples can be accessed using different feature extraction methods and, once fused on the feature-level, is in general more accurately classifiable in a pattern recognition task than the corresponding classification results for data derived from the individual spectroscopic approaches.
Background: To protect renewable packaging materials against autoxidation and decomposition when substituting harmful synthetic stabilizers with bioactive and bio-based compounds, extracts from Aesculus hippocastanum L. seeds were evaluated. The study objectives were to determine the antioxidant efficacy of bioactive compounds in horse chestnut seeds with regard to different seed fractions, improve their extraction, and to evaluate waste reuse. Methods: Different extraction techniques for field samples were evaluated and compared with extracts of industrial waste samples based on total phenolic content and total antioxidant capacity (2,2’-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) (ABTS)). The molecular weight distribution and absorbance in ultraviolet range (UV) of seed coat extracts were determined, and the possibility of extracts containing proanthocyanidins was examined. Results: Seed coat extracts show a remarkable antioxidant activity and a high UV absorbance. Passive extractions are efficient and much less laborious. Applying waste product seed coats leads to a reduced antioxidant activity, total phenolic content, and UV absorbance compared to the field sample counterparts. In contrast to peeled seed extracts, all seed coat extracts contain proanthocyanidins. Discussion: Seed coats are a potential source of bioactive compounds, particularly regarding sustainable production and waste reuse. With minimum effort, highly bioactive extracts with high potential as additives can be prepared.
Due to increased emissions of palladium nanoparticles in recent years, it is important to develop analytical techniques to characterize these particles. The synthesis of defined and stable particles plays a key role in this process, as there are not many materials commercially available yet which could act as reference materials. Polyvinylpyrrolidone- (PVP-) stabilized palladium nanoparticles were synthesized through the reduction of palladium chloride by tetraethylene glycol (TEG) in the presence of KOH. Four different methods were used for particle size analysis of the palladium nanoparticles. Palladium suspensions were analyzed by scanning electron microscopy (SEM), small angle X-ray scattering (SAXS), single-particle ICP-MS (SP-ICP-MS), and X-ray diffraction (XRD). Secondary particles between 30 nm and 130 nm were detected in great compliance with SAXS and SP-ICP-MS. SEM analysis showed that the small particulates tend to form agglomerates.
Large display environments are highly suitable for immersive analytics. They provide enough space for effective co-located collaboration and allow users to immerse themselves in the data. To provide the best setting - in terms of visualization and interaction - for the collaborative analysis of a real-world task, we have to understand the group dynamics during the work on large displays. Among other things, we have to study, what effects different task conditions will have on user behavior.
In this paper, we investigated the effects of task conditions on group behavior regarding collaborative coupling and territoriality during co-located collaboration on a wall-sized display. For that, we designed two tasks: a task that resembles the information foraging loop and a task that resembles the connecting facts activity. Both tasks represent essential sub-processes of the sensemaking process in visual analytics and cause distinct space/display usage conditions. The information foraging activity requires the user to work with individual data elements to look into details. Here, the users predominantly occupy only a small portion of the display. In contrast, the connecting facts activity requires the user to work with the entire information space. Therefore, the user has to overview the entire display.
We observed 12 groups for an average of two hours each and gathered qualitative data and quantitative data. During data analysis, we focused specifically on participants' collaborative coupling and territorial behavior.
We could detect that participants tended to subdivide the task to approach it, in their opinion, in a more effective way, in parallel. We describe the subdivision strategies for both task conditions. We also detected and described multiple user roles, as well as a new coupling style that does not fit in either category: loosely or tightly. Moreover, we could observe a territory type that has not been mentioned previously in research. In our opinion, this territory type can affect the collaboration process of groups with more than two collaborators negatively. Finally, we investigated critical display regions in terms of ergonomics. We could detect that users perceived some regions as less comfortable for long-time work.
Ereignet sich ein Unfall auf dem Heimweg vom Arbeitsplatz, während die betroffene Arbeitnehmerin mit einem Mobiltelefon telefoniert (sogenannte „gemischte Tätigkeit“), so scheidet ein Wegeunfall dann aus, wenn die Unfallentstehung überwiegend dem Telefonieren zuzurechnen ist und dieses damit für die Unfallentstehung wesentlich war.
Humankind, it can be argued, lives beyond its means and often at the expense of future generations. This paper starkly demonstrates, with the aid of a mathematical model, the imperative for a sustainable existence. In the model, consumption of resources is represented as a closed system, just like our planet. Long-term survival is only possible if consumption is below the ability of the system to regenerate.