Open Access

Background: Cancer heterogeneity poses a serious challenge concerning the toxicity and adverse effects of therapeutic inhibitors, especially when it comes to combinatorial therapies that involve multiple targeted inhibitors. In particular, in non-small cell lung cancer (NSCLC), a number of studies have reported synergistic effects of drug combinations in the preclinical models, while they were only partially successful in the clinical setup, suggesting those alternative clinical strategies (with genetic background and immune response) should be considered. Herein, we investigated the antitumor effect of cytokine-induced killer (CIK) cells in combination with ALK and PD-1 inhibitors in vitro on genetically variable NSCLC cell lines. Methods: We co-cultured the three genetically different NSCLC cell lines NCI-H2228 (EML4-ALK), A549 (KRAS mutation), and HCC-78 (ROS1 rearrangement) with and without nivolumab (PD-1 inhibitor) and crizotinib (ALK inhibitor). Additionally, we profiled the variability of surface expression multiple immune checkpoints, the concentration of absolute dead cells, intracellular granzyme B on CIK cells using flow cytometry as well as RT-qPCR. ELISA and Western blot were performed to verify the activation of CIK cells. Results: Our analysis showed that (a) nivolumab significantly weakened PD-1 surface expression on CIK cells without impacting other immune checkpoints or PD-1 mRNA expression, (b) this combination strategy showed an effective response on cell viability, IFN-g production, and intracellular release of granzyme B in CD3+ CD56+ CIK cells, but solely in NCI-H2228, (c) the intrinsic expression of Fas ligand (FasL) as a T-cell activation marker in CIK cells was upregulated by this additive effect, and (d) nivolumab induced Foxp3 expression in CD4+CD25+ subpopulation of CIK cells significantly increased. Taken together, we could show that CIK cells in combination with crizotinib and nivolumab can enhance the anti-tumor immune response through FasL activation, leading to increased IFN-g and granzyme B, but only in NCI-H2228 cells with EML4-ALK rearrangement. Therefore, we hypothesize that CIK therapy may be a potential alternative in NSCLC patients harboring EML4-ALK rearrangement, in addition, we support the idea that combination therapies offer significant potential when they are optimized on a patient-by-patient basis.

While most approaches individually exploit unstructured data from the biomedical literature or structured data from biomedical knowledge graphs, their union can better exploit the advantages of such approaches, ultimately improving representations of biology. Using multimodal transformers for such purposes can improve performance on context dependent classication tasks, as demonstrated by our previous model, the Sophisticated Transformer Trained on Biomedical Text and Knowledge Graphs (STonKGs). In this work, we introduce ProtSTonKGs, a transformer aimed at learning all-encompassing representations of protein-protein interactions. ProtSTonKGs presents an extension to our previous work by adding textual protein descriptions and amino acid sequences (i.e., structural information) to the text- and knowledge graph-based input sequence used in STonKGs. We benchmark ProtSTonKGs against STonKGs, resulting in improved F1 scores by up to 0.066 (i.e., from 0.204 to 0.270) in several tasks such as predicting protein interactions in several contexts. Our work demonstrates how multimodal transformers can be used to integrate heterogeneous sources of information, paving the foundation for future approaches that use multiple modalities for biomedical applications.

While PEM water electrolysis could be a favourable technique for in situ sanitization with ozone, its application is mainly limited to the use of ultrapure water to achieve a sufficient long-time stability. As additional charge carriers influence the occurring transport phenomena, we investigated the impact of different feed water qualities on the performance of a PEM tap water electrolyser for ozone evolution. The permeation of water and the four most abundant cations (Na+, K+, Ca2+, Mg2+) is characterised during stand-by and powered operation at different charge densities to quantify underlying transport mechanisms. Water transport is shown to linearly increase with the applied current (95 ± 2 mmol A−1 h−1) and occurs decoupled from ion permeation. A limitation of ion permeation is given by the transfer of ions in water to the anode/PEM interface. The unstabilized operation of a PEM electrolyser in tap water leads to a pH gradient which promotes the formation of magnesium and calcium carbonates and hydroxides on the cathode surface. The introduction of a novel auxiliary cathode in the anolytic compartment has shown to suppress ion permeation by close to 20%.

Jet engines of airplanes are designed such that in some components damage occurs and accumulates in service without being critical up to a certain level of damage. Since maintenance, repair, and component exchange are very cost-intensive, it is necessary to predict efficiently the component lifetime with high accuracy. A former developed lifetime model, based on interpolated results of aerodynamic and structural mechanics simulations, uses material parameters estimated from literature values of standard creep experiments. For improved accuracy, an experimental procedure is developed for the characterization of the short-time creep behavior, which is relevant for the operation of turbine blades of jet engines. To consider microstructural influences resulting from the manufacturing of thin-walled single crystal turbine blades, small-scale specimens from used turbine blades are extracted and tested in short- and medium-time creep experiments. Based on experimental results and literature values, a creep model, which describes the fracture behavior for a wide range of creep loads, is calibrated and is now used for the lifetime prediction of turbine blades under real loading conditions.

Die Hochzeit des gedruckten Videospieljournalismus um die Jahrtausendwende ist vorüber. Seit über 15 Jahren sind die verkauften Auflagen der klassischen Videospielzeitschriften wie Gamestar oder PC Games rückläufig. Andere Magazine wurden zwischenzeitlich aus wirtschaftlichen Gründen eingestellt, darunter PC Action oder auch der einstige Marktführer Computer Bild Spiele. Trotzdem entwickelte sich eine journalistische Gegenbewegung, die Kieron Gillen im Jahr 2004 in seinem Manifest "The New Games Journalism" begründete. Es entstanden in Deutschland Videospielzeitschriften wie GAIN oder WASD, deren Berichterstattung Videospiele weniger als Produkt, sondern zunehmend als künstlerisches Objekt wahrnehmen und sie in einen gesellschaftlichen und kulturellen Kontext einordnen. Ungeachtet dessen erfolgt in den Redaktionen eine technische und inhaltliche Sichtung der Videospiele, die dem Publikum als Testbericht präsentiert wird. Da es sich dabei aus historischer Perspektive um den Kerninhalt von Videospielzeitschriften handelt, soll dieser als Analysegegenstand dieser Arbeit dienen und ein Indiz für die Qualität der Magazine als Ganzes sein. Mit Blick auf die unterschiedlichen Entwicklungen im Videospieljournalismus soll folgende Frage beantwortet werden: Verfügen moderne Videospielzeitschriften über eine höhere Qualität als klassische Magazine? Dazu erfolgt eine qualitative Inhaltsanalyse der Testberichte und ein Vergleich mit etablierten Qualitätsmerkmalen aus dem allgemeinen Journalismus, ebenso wie dem Fach-, Nutzwert- und Videospieljournalismus.

Research has identified nudging as a promising and effective tool to improve healthy eating behavior in a cafeteria setting. However, it remains unclear who is and who is not “nudgeable” (susceptible to nudges). An important influencing factor at the individual level is nudge acceptance. While some progress has been made in determining influences on the acceptance of healthy eating nudges, research on how personal characteristics (such as the perception of social norms) affect nudge acceptance remains scarce. We conducted a survey on 1032 university students to assess the acceptance of nine different types of healthy eating nudges in a cafeteria setting with four influential factors (social norms, health-promoting collaboration, responsibility to promote healthy eating, and procrastination). These factors are likely to play a role within a university and a cafeteria setting. The present study showed that key influential factors of nudge acceptance were the perceived responsibility to promote healthy eating and health-promoting collaboration. We also identified three different student clusters with respect to nudge acceptance, demonstrating that not all nudges were accepted equally. In particular, default, salience, and priming nudges were at least moderately accepted regardless of the degree of nudgeability. Our findings provide useful policy implications for nudge development by university, cafeteria, and public health officials. Recommendations are formulated for strengthening the theoretical background of nudge acceptance and the susceptibility to nudges.

Unlimited paid time off policies are currently fashionable and widely discussed by HR professionals around the globe. While on the one hand, paid time off is considered a key benefit by employees and unlimited paid time off policies (UPTO) are seen as a major perk which may help in recruiting and retaining talented employees, on the other hand, early adopters reported that employees took less time off than previously, presumably leading to higher burnout rates. In this conceptual review, we discuss the theoretical and empirical evidence regarding the potential effects of UPTO on leave utilization, well-being and performance outcomes. We start out by defining UPTO and placing it in a historical and international perspective. Next, we discuss the key role of leave utilization in translating UPTO into concrete actions. The core of our article constitutes the description of the effects of UPTO and the two pathways through which these effects are assumed to unfold: autonomy need satisfaction and detrimental social processes. We moreover discuss the boundary conditions which facilitate or inhibit the successful utilization of UPTO on individual, team, and organizational level. In reviewing the literature from different fields and integrating existing theories, we arrive at a conceptual model and five propositions, which can guide future research on UPTO. We conclude with a discussion of the theoretical and societal implications of UPTO.

Characterization methods of pressure sensitive adhesives (PSA) originate from technical bonding and do not cover relevant data for the development and quality assurance of medical applications, where PSA with flexible backing layers are adopted to human skin. In this study, a new method called RheoTack is developed to determine (mechanically and optically) an adhesion and detaching behavior of flexible and transparent PSA based patches. Transdermal therapeutic systems (TTS) consisting of silicone-based PSAs on a flexible and transparent backing layer were tested on a rotational rheometer with an 8 mm plate as a probe rod at retraction speeds of 0.01, 0.1, and 1 mm/s with respect to their adhesion and detaching behavior in terms of force-retraction displacement curves. The curves consist of a compression phase to affirm wetting; a tensile deformation phase intercepting stretching, cavity, and fibril formation; and a failure phase with detaching. Their analysis provides values for stiffness, force, and displacement of the beginning of fibril formation, force and displacement of the beginning of a failure due to fibril breakage and detaching, as well as corresponding activation energies. All these parameters exhibit the pronounced dependency on the retraction speed. The force-retraction displacement curves together with the simultaneous video recordings of the TTS deformation from three different angles (three cameras) provide deeper insight into the deformation processes and allow for interpreting the properties’ characteristics for PSA applications.

Purpose: Both Hungary and Germany belong to the old-world wine-producing countries and have long winemaking traditions. This paper aims at exploring and comparing online branding strategies of family SME (small and medium sized enterprises) wineries at Lake Balaton (Hungary) and Lake Constance (Germany), as two wine regions with similar geographic characteristics. Design/methodology/approach: This paper, based on a total sample of 37 family wineries, 15 at Lake Balaton and 22 at Lake Constance, investigates the differences in brand identity on the website, brand image in social media and online communication channels deployed in both wine regions. The study applies a qualitative methodology using MaxQDA software for conducting content analysis of texts in websites and social media. Descriptive statistics and t-test were conducted to compare the usage of different communication channels and determine statistical significance. Findings: At Lake Balaton, the vineyard, the winery and the family, while at Lake Constance, the lake itself and the grape are highlighted regarding family winery brand identity. The customer-based brand image of Hungarian family wineries emphasizes wine, food and service, with the predominant use of Facebook. In the German family wineries, the focus of brand identity is on wine, friendliness and taste and includes more extensive usage of websites. Originality/value: The paper deploys a novel methodology, both in terms of tools used as well as geographic focus to uncover online branding patterns of family wineries, thereby providing implications for wine and tourism industries at lake regions. It compares the share of selected most-used words in the overall text in websites and in social media, and presents the key findings from this innovative approach.

Part segmentation is the task of semantic segmentation applied on objects and carries a wide range of applications from robotic manipulation to medical imaging. This work deals with the problem of part segmentation on raw, unordered point clouds of 3D objects. While pioneering works on deep learning for point clouds typically ignore taking advantage of local geometric structure around individual points, the subsequent methods proposed to extract features by exploiting local geometry have not yielded significant improvements either. In order to investigate further, a graph convolutional network (GCN) is used in this work in an attempt to increase the effectiveness of such neighborhood feature exploitation approaches. Most of the previous works also focus only on segmenting complete point cloud data. Considering the impracticality of such approaches, taking into consideration the real world scenarios where complete point clouds are scarcely available, this work proposes approaches to deal with partial point cloud segmentation.     In the attempt to better capture neighborhood features, this work proposes a novel method to learn regional part descriptors which guide and refine the segmentation predictions. The proposed approach helps the network achieve state-of-the-art performance of 86.4% mIoU on the ShapeNetPart dataset for methods which do not use any preprocessing techniques or voting strategies. In order to better deal with partial point clouds, this work also proposes new strategies to train and test on partial data. While achieving significant improvements compared to the baseline performance, the problem of partial point cloud segmentation is also viewed through an alternate lens of semantic shape completion.     Semantic shape completion networks not only help deal with partial point cloud segmentation but also enrich the information captured by the system by predicting complete point clouds with corresponding semantic labels for each point. To this end, a new network architecture for semantic shape completion is also proposed based on point completion network (PCN) which takes advantage of a graph convolution based hierarchical decoder for completion as well as segmentation. In addition to predicting complete point clouds, results indicate that the network is capable of reaching within a margin of 5% to the mIoU performance of dedicated segmentation networks for partial point cloud segmentation.

With the increasing demand for ultrapure water in the pharmaceutical and semiconductor industry, the need for precise measuring instruments for those applications is also growing. One critical parameter of water quality is the amount of total organic carbon (TOC). This work presents a system that uses the advantage of the increased oxidation power achieved with UV/O3 advanced oxidation process (AOP) for TOC measurement in combination with a significant miniaturization compared to the state of the art. The miniaturization is achieved by using polymer-electrolyte membrane (PEM) electrolysis cells for ozone generation in combination with UV-LEDs for irradiation of the measuring solution, as both components are significantly smaller than standard equipment. Conductivity measurement after oxidation is the measuring principle and measurements were carried out in the TOC range between 10 and 1000 ppb TOC. The suitability of the system for TOC measurement is demonstrated using the oxidation by ozonation combined with UV irradiation of defined concentrations of isopropyl alcohol (IPA).

Modern GPUs come with dedicated hardware to perform ray/triangle intersections and bounding volume hierarchy (BVH) traversal. While the primary use case for this hardware is photorealistic 3D computer graphics, with careful algorithm design scientists can also use this special-purpose hardware to accelerate general-purpose computations such as point containment queries. This article explains the principles behind these techniques and their application to vector field visualization of large simulation data using particle tracing.

A supramolecular approach for photonic materials based on hydrogen-bonded cholesteric liquid crystals is presented. The modular toolbox of low-molecular-weight hydrogen-bond donors and acceptors provides a simple route toward liquid crystalline materials with tailor-made thermal and photonic properties. Initial studies reveal broad application potential of the liquid crystalline thin films for chemo- and thermosensing. The chemosensing performance is based on the interruption of the intermolecular forces between the donor and acceptor moieties by interference with halogen-bond donors. Future studies will expand the scope of analytes and sensing in aqueous media. In addition, the implementation of the reported materials in additive manufacturing and printed photonic devices is planned.

Der vorliegende Beitrag setzt sich mit der Bedeutung von Lernorten der beruflichen Bildung im Zuge einer BBNE sowie der diesbezüglichen Kompetenzentwicklung auseinander. Dabei wird entlang des BIBB-Modellversuchs „NAUZUBI“ ein möglicher Ansatz skizziert, der darauf ausgerichtet ist, eine integrative Kompetenzentwicklung in Nachhaltigkeitsthemen zu ermöglichen. Ausgangspunkt sind dabei betriebliche Nachhaltigkeitsaudits, die im vorliegenden Ansatz als kontextualisierte Zugänge für berufliche Lernanlässe dienten. Diese wurden in aufeinander abgestimmten Schritten im betrieblichen und schulischen Lernen reflektiert. Im Beitrag werden das Grundkonzept sowie die entsprechenden Umsetzungserfahrungen beschrieben. Es werden ferner Herausforderungen und Potenziale für das betriebliche, berufsschulische und das lernortkooperative Lernen und damit die integrative Kompetenzentwicklung dargestellt.

Aufgrund SARS-CoV-2 ist eine Rechtsvorlesung für Betriebswirte im Bachelorstudiengang an zwei verschiedenen Standorten der Hochschule Bonn-Rhein-Sieg mit über 300 Studierenden unter Anwendung des Inverted Classroom Ansatzes zum Sommersemester 2020 vollständig digitalisiert worden. Durch die von außen vorgegebene Lernstrategie mit wöchentlichen Arbeitspaketen und die Nutzung einer asynchronen Kommunikationsplattform auf Basis eines Instant Messengers mit adressatenadäquater Ansprache gelang es, Synchronformate auf ein notwendiges Minimum zu reduzieren. Die Ergebnisse der empirischen Begleitung zeigen, dass das neue didaktische Konzept für eine digitale Lehre die unterschiedlichsten Bedürfnisse der Studierenden befriedigte. Insbesondere konnte eine »digitale Lernatmosphäre« geschaffen werden, die von den Studierenden als sehr förderlich für ihren Lernprozess erachtet wurde. Die induzierte Lernstrategie führte zu signifikanten Leistungsverbesserungen. Es wird diskutiert, welche Maßnahmen sich auch für postpandemische Lehre empfehlen.

In this paper, a gas-to-power (GtoP) system for power outages is digitally modeled and experimentally developed. The design includes a solid-state hydrogen storage system composed of TiFeMn as a hydride forming alloy (6.7 kg of alloy in five tanks) and an air-cooled fuel cell (maximum power: 1.6 kW). The hydrogen storage system is charged under room temperature and 40 bar of hydrogen pressure, reaching about 110 g of hydrogen capacity. In an emergency use case of the system, hydrogen is supplied to the fuel cell, and the waste heat coming from the exhaust air of the fuel cell is used for the endothermic dehydrogenation reaction of the metal hydride. This GtoP system demonstrates fast, stable, and reliable responses, providing from 149 W to 596 W under different constant as well as dynamic conditions. A comprehensive and novel simulation approach based on a network model is also applied. The developed model is validated under static and dynamic power load scenarios, demonstrating excellent agreement with the experimental results.

The white ground crater by the Phiale Painter (450–440 BC) exhibited in the “Pietro Griffo” Archaeological Museum in Agrigento (Italy) depicts two scenes from Perseus myth. The vase is of utmost importance to archaeologists because the figures are drawn on a white background with remarkable daintiness and attention to detail. Notwithstanding the white ground ceramics being well documented from an archaeological and historical point of view, doubts concerning the compositions of pigments and binders and the production technique are still unsolved. This kind of vase is a valuable rarity, the use of which is documented in elitist funeral rituals. The study aims to investigate the constituent materials and the execution technique of this magnificent crater. The investigation was carried out using non-destructive and non-invasive techniques in situ. Portable X-ray fluorescence and Fourier-transform total reflection infrared spectroscopy complemented the use of visible and ultraviolet light photography to get an overview and specific information on the vase. The XRF data were used to produce false colour maps showing the location of the various elements detected, using the program SmART_scan. The use of gypsum as the material for the white ground is an important result that deserves to be further investigated in similar vases.

In den letzten Jahren hat die mediale Präsenz des E-Sports in Deutschland zugenommen, was dazu führte, dass auch die Allgemeinheit sich mit dem Thema auseinandersetzt. Dadurch sind Fernsehunternehmen auf die ursprüngliche Nischensportart, welche im Internet beheimatet und dort stark verwurzelt ist, aufmerksam geworden und bauen ihr Engagement in dem Bereich aus, um an dem wachsenden Erfolg teilzuhaben, der dem E-Sport prognostiziert wird. Doch eine erfolgreiche und geeignete Thematisierung des Trendthemas scheint aufgrund der besonderen Rahmenbedingungen nicht so einfach zu sein, wie es bei anderen klassischen Sportarten der Fall ist. Daraus ergibt sich die Frage: Welche Chancen hat die Thematisierung des E-Sports bei deutschen Fernsehsendern, wenn man die besonderen Gegebenheiten zusammen betrachtet? Die TV-Sender haben hierbei die Aufgabe, ein Publikum zu gewinnen, welches eigentlich gewohnt ist, dieses Thema im Internet zu konsumieren – dabei verliert das Fernsehen seit dem digitalen Zeitalter sowieso schon immer mehr Zuschauende an ebendieses. Neben den Hindernissen, die überwunden werden müssen, bietet der E-Sport den Fernsehunternehmen aber auch Mehrwerte – beides wird in dieser Arbeit ergründet. Diese explorative Forschungsarbeit bietet einen Ansatz für die weitere Erforschung des E-Sports in den deutschen Medien – vor allem, da existierende Arbeiten sich hauptsächlich auf Live-Streaming-Portale oder die Darstellung des E-Sports in den klassischen Medien beziehen und ein Bezug zu den Intentionen und Gedanken der Fernsehunternehmen nicht vorhanden ist. Um diese Lücke zu schließen, wurden sieben Handelnde bei deutschen TV-Sendern oder Senderfamilien interviewt, die den E-Sport schon in unterschiedlicher Intensivität behandelt oder Überlegungen dazu durchgeführt haben. Den Abschluss dieser Arbeit - und gleichzeitige Anknüpfungspunkte für eine weiterführende Forschung zu dem Thema - bilden die acht Hypothesen, die einen Aufschluss darüber geben, welche Faktoren einen Einfluss auf die Chancen einer Thematisierung haben und die durch die Methode der qualitativen Inhaltsanalyse erstellt wurden. Der Forschungsgegenstand wurde dabei unter einer Vielzahl besonderer Aspekte und deren Wechselwirkungen betrachtet, wie z. B. den unterschiedlichen Senderformen, den Umständen innerhalb der E-Sport-Branche oder den vorhandenen Unternehmensstrukturen.

A main factor hampering life in space is represented by high atomic number nuclei and energy (HZE) ions that constitute about 1% of the galactic cosmic rays. In the frame of the “STARLIFE” project, we accessed the Heavy Ion Medical Accelerator (HIMAC) facility of the National Institute of Radiological Sciences (NIRS) in Chiba, Japan. By means of this facility, the extremophilic species Haloterrigena hispanica and Parageobacillus thermantarcticus were irradiated with high LET ions (i.e., Fe, Ar, and He ions) at doses corresponding to long permanence in the space environment. The survivability of HZE-treated cells depended upon either the storage time and the hydration state during irradiation; indeed, dry samples were shown to be more resistant than hydrated ones. With particular regard to spores of the species P. thermantarcticus, they were the most resistant to irradiation in a water medium: an analysis of the changes in their biochemical fingerprinting during irradiation showed that, below the survivability threshold, the spores undergo to a germination-like process, while for higher doses, inactivation takes place as a consequence of the concomitant release of the core’s content and a loss of integrity of the main cellular components. Overall, the results reported here suggest that the selected extremophilic microorganisms could serve as biological model for space simulation and/or real space condition exposure, since they showed good resistance to ionizing radiation exposure and were able to resume cellular growth after long-term storage.

Correction to: Orphanet Journal of Rare Diseases (2020) 15:48 https://doi.org/10.1186/s13023-020-1319-7

It is challenging to provide users with a haptic weight sensation of virtual objects in VR since current consumer VR controllers and software-based approaches such as pseudo-haptics cannot render appropriate haptic stimuli. To overcome these limitations, we developed a haptic VR controller named Triggermuscle that adjusts its trigger resistance according to the weight of a virtual object. Therefore, users need to adapt their index finger force to grab objects of different virtual weights. Dynamic and continuous adjustment is enabled by a spring mechanism inside the casing of an HTC Vive controller. In two user studies, we explored the effect on weight perception and found large differences between participants for sensing change in trigger resistance and thus for discriminating virtual weights. The variations were easily distinguished and associated with weight by some participants while others did not notice them at all. We discuss possible limitations, confounding factors, how to overcome them in future research and the pros and cons of this novel technology.

Die vorliegende Bachelorarbeit setzt sich kritisch mit den Auswirkungen einer anhaltenden, inflationären Geldpolitik in der Eurozone auf den privaten Sparer auseinander. Im Rahmen dieser Arbeit wird aufgezeigt, wie die starke Erhöhung der Geldmenge Einfluss auf die Möglichkeiten und Entscheidungen des Sparers hat und wie weit eine solche Geldpolitik mit den Interessen des Sparers vereinbar ist.

In den Atmosphärenwissenschaften spielt die Strahlungsbilanz der Erde eine wichtige Rolle für unser Verständnis des Klimasystems. Hier liefern ausgereifte Satellitenprodukte dekadische Klimazeitreihen mit einer so hohen Genauigkeit, dass z.B. Änderungen im Zusammenhang mit dem Klimawandel detektiert werden können. Dies gilt insbesondere auch für die solaren Strahlungsflüsse an der Erdoberfläche. Beim Vergleich dieser Satellitenprodukte mit instantanen Beobachtungen der Strahlung am Erdboden sind jedoch oft erhebliche Abweichungen feststellbar, die hauptsächlich durch kleinskalige Variabilität in der räumlichen Struktur von Wolken und ihrer Strahlungswirkung verursacht werden. Hier ist auch zu bedenken, dass Bodenbeobachtungen fast einer Punktmessung entsprechen, während Satellitenpixel eine Fläche in der Größenordnung von Quadratkilometern abtasten.

The aim of this study was to investigate employees’ self-reported creativity before and after vacation and to examine the impact of recovery experiences (detachment, relaxation, mastery, meaning, autonomy, affiliation) on changes in creativity. The DRAMMA model of Newman et al. provides the theoretical background of our approach. Longitudinal data was assessed with four repeated measurements. The study encompassed data from 274 white-collar workers. Analyses showed that employees subjectively perceive their creativity to benefit not immediately after their vacation but 2 weeks later. Detachment was significantly related to lower creativity within persons, while mastery experiences explained differences in creativity between persons. This study provides a detailed picture of changes in creativity around vacations.

Introduction: Chronic pain is a frequent severe disease and often associated with anxiety, depression, insomnia, disability, and reduced quality of life. This maladaptive condition is further characterized by sensory loss, hyperalgesia, and allodynia. Blue light has been hypothesized to modulate sensory neurons and thereby influence nociception. Objectives: Here, we compared the effects of blue light vs red light and thermal control on pain sensation in a human experimental pain model. Methods: Pain, hyperalgesia, and allodynia were induced in 30 healthy volunteers through high-density transcutaneous electrical stimulation. Subsequently, blue light, red light, or thermal control treatment was applied in a cross-over design. The nonvisual effects of the respective light treatments were examined using a well-established quantitative sensory testing protocol. Somatosensory parameters as well as pain intensity and quality were scored. Results: Blue light substantially reduced spontaneous pain as assessed by numeric rating scale pain scoring. Similarly, pain quality was significantly altered as assessed by the German counterpart of the McGill Pain Questionnaire. Furthermore, blue light showed antihyperalgesic, antiallodynic, and antihypesthesic effects in contrast to red light or thermal control treatment. Conclusion: Blue-light phototherapy ameliorates pain intensity and quality in a human experimental pain model and reveals antihyperalgesic, antiallodynic, and antihypesthesic effects. Therefore, blue-light phototherapy may be a novel approach to treat pain in multiple conditions.

In the research project "MetPVNet", both, the forecast-based operation management in distribution grids and as well as the forecasts of the feed-in of PV-power from decentralized plants could be improved on the basis of satellite data and numerical weather forecasts. Based on a detailed network analyses for a real medium-voltage grid area, it was shown that both – the integration of forecast data based on satellite and weather data and the improvement of subsequent day forecasts based on numerical weather models – have a significant added value for forecast-based congestion management or redispatch and reactive power management in the distribution grid. Furthermore, forecast improvements for the forecast model of the German Weather Service were achieved by assimilating visible satellite imagery, and cloud and radiation products from satellites were improved, thus improving the database for short-term forecasting as well as for assimilation. In addition, several methods have been developed that will enable forecast improvement in the future, especially for weather situations with high cloud induced variability and high forecast errors. This article summarizes the most important project results.

Polymer fibers with liquid crystals (LCs) in the core have potential as autonomous sensors of airborne volatile organic compounds (VOCs), with a high surface-to-volume ratio enabling fast and sensitive response and an attractive non-woven textile form factor. We demonstrate their ability to continuously and quantitatively measure the concentration of toluene, cyclohexane, and isopropanol as representative VOCs, via the impact of each VOC on the LC birefringence. The response is fully reversible and repeatable over several cycles, the response time can be as low as seconds, and high sensitivity is achieved when the operating temperature is near the LC-isotropic transition temperature. We propose that a broad operating temperature range can be realized by combining fibers with different LC mixtures, yielding autonomous VOC sensors suitable for integration in apparel or in furniture that can compete with existing consumer-grade electronic VOC sensors in terms of sensitivity and response speed.

This paper proposes a traces model in the form of an object or class model (in the UML sense) which allows the automatic calculation of indicators of various kinds and independently of the computer environment for human learning (CEHL). The model is based on the establishment of a trace-based system that encompasses all the logic of traces collecting and indicators calculation. It is im-plemented in the form of a trace database. It is an important contribution in the field of the exploitation of the traces of apprenticeship in a CEHL because it pro-vides a general formalism for modeling the traces and allowing the calculation of several indicators at the same time. Also, with the inclusion of calculated indica-tors as potential learning traces, our model provides a formalism for classifying the various indicators in the form of inheritance relationships, which promotes the reuse of indicators already calculated. Economically, the model can allow organi-zations with different learning platforms to invest only in one traces Management System. At the social level, it can allow a better sharing of trace databases be-tween the various research institutions in the field of CEHL.

Der Öffentliche Gesundheitsdienst (ÖGD) übernimmt eine wichtige Funktion in Sachen Bevölkerungsgesundheit und wird häufig, neben ambulanter und stationärer Versorgung, als ‚dritte Säule‘ im deutschen Gesundheitswesen beschrieben. Diese sprachlich gleichwertige Positionierung spiegelt sich allerdings in der Realität nicht wider, im Vergleich ist seine Stellung eher schwach. In der Frage, welche Ursachen hierfür vorliegen, könnte eine Hypothese lauten, dass ein diffuses Aufgabenprofil einen negativen Einfluss auf seine Stellung ausübt. Um diesen möglichen Einfluss näher zu untersuchen, lautet die Forschungsfrage: „Wie lässt sich die Stellung des ÖGD innerhalb des deutschen Gesundheitswesens anhand seines Aufgabenprofils aus kontingenztheoretischer Perspektive erklären?“. Zu deren Beantwortung wird zunächst die Ausgestaltung der aktuellen Aufgabenprofile erhoben und verglichen. Anschließend untersucht die Arbeit mit Hilfe der organisationssoziologischen Kontingenztheorie, welche situativen Einflussfaktoren sich möglicherweise auf Aufgabenprofil und damit auch die Stellung des ÖGD ausgewirkt haben. Im Ergebnis zeigt sich, dass Veränderungen in den Aufgaben teilweise recht deutlich in Verbindung gebracht werden können mit Veränderungen der Organisationssituation, auch lässt sich ein Zusammenhang zwischen Aufgabenprofil und Stellung vermuten. Soll dem ÖGD in Zukunft wieder eine stärkere Bedeutung zukommen, so ist es neben einer gewissen Vereinheitlichung der Aufgabenprofile von großer Bedeutung, ihm wieder exklusive Aufgaben zuzusprechen. Diese könnten insbesondere in den Bereichen Planung, Koordination und Steuerung, Datengewinnung und aufbereitung oder darin liegen, sich wieder verstärkt auf Bevölkerungsgruppen zu fokussieren, welche nicht durch andere Bereiche abgedeckt werden. Hierfür müssen die nötigen Ressourcen zur Verfügung stehen: Neben den bereits beschlossenen Unterstützungsleistungen gilt es insbesondere in Bezug auf die personelle Ausstattung, den ÖGD langfristig attraktiv zu gestalten. Dazu kann eine aufgewertete Stellung sowie eine verbesserte Situation in den einzelnen Behörden einen großen Teil beitragen.

Cancer is a complex disease where resistance to therapies and relapses often pose a serious clinical challenge. The scenario is even more complicated when the cancer type itself is heterogeneous in nature, e.g., lymphoma, a cancer of the lymphocytes which constitutes more than 70 different subtypes. Indeed, the treatment options continue to expand in lymphomas. Herein, we provide insights into lymphoma-specific clinical trials based on cytokine-induced killer (CIK) cell therapy and other pre-clinical lymphoma models where CIK cells have been used along with other synergetic tumor-targeting immune modules to improve their therapeutic potential. From a broader perspective, we will highlight that CIK cell therapy has potential, and in this rapidly evolving landscape of cancer therapies its optimization (as a personalized therapeutic approach) will be beneficial in lymphomas.

An der Hochschule Bonn-Rhein-Sieg fand am Donnerstag, den 23.9.21 das erste Verbraucherforum für Verbraucherinformatik statt. Im Rahmen der Online-Tagesveranstaltung diskutierten mehr als 30 Teilnehmer:innen über Themen und Ideen rund um den Bereich Verbraucherdatenschutz. Dabei kamen sowohl Beiträge aus der Informatik, den Verbraucher- und Sozialwissenschaften sowie auch der regulatorischen Perspektive zur Sprache. Der folgende Beitrag stellt den Hintergrund der Veranstaltung dar und berichtet über Inhalte der Vorträge sowie Anknüpfungspunkte für die weitere Konstituierung der Verbraucherinformatik. Veranstalter waren das Institut für Verbraucherinformatik an der H-BRS in Zusammenarbeit mit dem Lehrstuhl IT-Sicherheit der Universität Siegen sowie dem Kompetenzzentrum Verbraucherforschung NRW der Verbraucherzentrale NRW e. V. mit Förderung des Bundesministeriums der Justiz und für Verbraucherschutz.

Die Blockchain-Technologie ist einer der großen Innovationstreiber der letzten Jahre. Mit einer zugrundeliegenden Blockchain-Technologie ist auch der Betrieb von verteilten Anwendungen, sogenannter Decentralized Applications (DApps), bereits technisch umsetzbar. Dieser Beitrag verfolgt das Ziel, Gestaltungsmöglichkeiten der digitalen Verbraucherteilhabe an Blockchain-Anwendungen zu untersuchen. Hierzu enthält der Beitrag eine Einführung in die digitale Verbraucherteilhabe und die technischen Grundlagen und Eigenschaften der Blockchain-Technologie, einschließlich darauf basierender DApps. Abschließend werden technische, ethisch-organisatorische, rechtliche und sonstige Anforderungsbereiche für die Umsetzung von digitaler Verbraucherteilhabe in Blockchain-Anwendungen adressiert.

Künstliche Intelligenz im autonomen Fahrzeug verarbeitet enorme Mengen an Daten. Beim Betrieb eines solchen Fahrzeugs basiert jede Bewegung auf einer datenbasierten, automatisierten und adaptiven Entscheidungsfindung. Aber auch, um Regeln zur Erkennung und Entscheidung in komplexen Situationen wie den hochindividuellen Verkehrsszenarien entwickeln zu können (KI-Training), sind bereits beachtliche Datenmengen von Fahrzeugen im Realverkehr erforderlich – zum Beispiel Videosequenzen aus Kamerafahrten. Für das Training Künstlicher Intelligenz ist es aus Sicht der Fahrzeugentwicklung attraktiv, auf den Datenschatz zuzugreifen, den die Gesamtheit der Fahrzeuge im realen Anwendungskontext erzeugen kann. Als Nutzer:innen und Insassen sind Verbraucher:innen so Teil einer groß angelegten Testdatenerhebung durch Fahrzeughersteller und Anbieter. Das wirft Datenschutzfragen auf. Ziel des vorliegenden Beitrags ist es herauszuarbeiten, inwiefern sich hierdurch Implikationen für die Rechte und Freiheiten von Verbraucher:innen ergeben und welche Mechanismen das geltende Recht sowie aktuelle legislative Entwicklungen bereithalten, den „Datenhunger“ der KI mit den Interessen an Datensouveränität und informationeller Selbstbestimmung in Einklang und Ausgleich zu bringen. Im Fokus steht dabei insbesondere, wie Anforderungen schon im Produktdesign „mitgedacht“ werden und damit für Verbraucher:innen rechts- und vertrauensfördernd wirken können.

Sprachassistenten wie Alexa oder Google Assistant sind aus dem Alltag vieler VerbraucherInnen nicht mehr wegzudenken. Sie überzeugen insbesondere durch die sprachbasierte und somit freihändige Steuerung und mitunter auch den unterhaltsamen Charakter. Als häuslicher Lebensmittelpunkt sind die häufigsten Aufstellungsorte das Wohnzimmer und die Küche, da sich Haushaltsmitglieder dort die meiste Zeit aufhalten und das alltägliche Leben abspielt. Dies bedeutet allerdings ebenso, dass an diesen Orten potenziell viele Daten erfasst und gesammelt werden können, die nicht für den Sprachassistenten bestimmt sind. Demzufolge ist nicht auszuschließen, dass der Sprachassistent – wenn auch versehentlich – durch Gespräche oder Geräusche aktiviert wird und Aufnahmen speichert, selbst wenn eine Aktivierung unbewusst von Anwesenden bzw. von anderen Geräten (z. B. Fernseher) erfolgt oder aus anderen Räumen kommt. Im Rahmen eines Forschungsprojekts haben wir dazu NutzerInnen über Ihre Nutzungs- und Aufstellungspraktiken der Sprachassistenten befragt und zudem einen Prototyp getestet, der die gespeicherten Interaktionen mit dem Sprachassistenten sichtbar macht. Dieser Beitrag präsentiert basierend auf den Erkenntnissen aus den Interviews und abgeleiteten Leitfäden aus den darauffolgenden Nutzungstests des Prototyps eine Anwendung zur Beantragung und Visualisierung der Interaktionsdaten mit dem Sprachassistenten. Diese ermöglicht es, Interaktionen und die damit zusammenhängende Situation darzustellen, indem sie zu jeder Interaktion die Zeit, das verwendete Gerät sowie den Befehl wiedergibt und unerwartete Verhaltensweisen wie die versehentliche oder falsche Aktivierung sichtbar macht. Dadurch möchten wir VerbraucherInnen für die Fehleranfälligkeit dieser Geräte sensibilisieren und einen selbstbestimmteren und sichereren Umgang ermöglichen.

Unsere interdisziplinäre Forschungsarbeit „Die Gestaltung wirksamer Bildsymbole für Verarbeitungszwecke und ihre Folgen für Betroffene“ („Designing Effective Privacy Icons through an Interdisciplinary Research Methodology“) baut auf dem „Data Protection by Design“-Ansatz (Art. 25(1) DSGVO) auf und zielt auf folgende Forschungsfragen ab: Wie müssen das Transparenzprinzip (Art. 5(1)(a) DSGVO) und die Informationspflichten (Art. 12-14 DSGVO) insbesondere im Hinblick auf die Festlegung der Verarbeitungszwecke (Art. 5(1)(b) DSGVO) umgesetzt werden, damit sie die Nutzer:innen effektiv vor Risiken der Datenverarbeitung schützen? Mit welchen Methoden lässt sich die Wirksamkeit der Umsetzung ermitteln und diese auch durchsetzen?1 Im vorliegenden Projekt erweitern wir juristische Methoden um solche aus der HCI-Forschung (Human Computer Interaction) und der Visuellen Gestaltung. In einer ersten Phase haben wir mit empirischen Methoden der HCI-Forschung untersucht, welche Datennutzungstypen Nutzer:innen technologieübergreifend als relevant empfinden. Diese Erkenntnisse können als Ausgangspunkt für eine neue Zweckbestimmung dienen, die bestimmte Datennutzungstypen deutlicher ein- oder ausschließt. Erste Umformulierungen von Zweckbestimmungen haben wir in zwei Praxisworkshops mit Verantwortlichen der Datenverarbeitung getestet. In einer darauffolgenden qualitativen Studie untersuchten wir dann die Einstellungen und Erwartungen von Internetnutzerinnen und -nutzern am Beispiel der Personalisierung von Internetinhalten, um die entsprechenden Zwecke anhand eines konkreten Beispiels, in unserem Fall der personalisierten Werbung, neu zu formulieren. Auf dieser Basis haben wir nun die zweite Forschungsphase begonnen, in der wir Designs für Datenschutzhinweise und Kontrollmöglichkeiten unter besonderer Berücksichtigung des Verarbeitungszwecks entwickeln. Da der Einsatz von Cookies eine wichtige Rolle bei der Personalisierung von Werbung spielt, ist eine zentrale Aufgaben die Neugestaltung des sogenannten „Cookie-Banners“.

Cultivation of perennials such as Miscanthus x giganteus Greef et Deuter (Mis) combines the provision of ecosystem services and the generation of additional carbon sources for farming. The potential of Mis based fertilisers, regarding immobilisation of inorganic nitrogen (N) and build-up of soil organic matter (SOM), was tested in a field trial. Therefore, a crop rotation of winter barley (Hordeum vulgare L.), mustard (Sinapis alba L.) as catch crop, sugar beet (Beta vulgaris L.) and winter wheat (Triticum aestivum L.) was set up. The tested treatments were a mixture of Cattle Slurry (CS) and Mis, a mixture of CS and Wheat Straw (CS–WS), Cattle Manure (CM) from Mis shredded bedding, CM from WS shredded bedding, a pure CS, Urea Ammonium Nitrate (UAN) and a treatment without any N applied (NoN). When the carbon-rich fertilisers (both mixtures and manures) were applied to cereals, they led to a slight N immobilisation compared to pure CS, whereas differences were mostly not significant. Furthermore, Mis fertilisers were at least as efficient as WS-based organic fertilisers in inducing a contribution of SOM build-up and in reducing inorganic N before winter and thus preventing N losses, whereas differences were mostly not significant.

This paper investigates the impact of current sensors on the measurement of transient currents in fast-switching power semiconductors in a double pulse test (DPT environment. We review previous research that assesses the influence of current sensors on a DPT circuit through mathematical modeling. The developed selection aids can be used to identify suitable current sensors for transient current measurements of fast-switching power semiconductors and to estimate the error introduced by their insertion into the DPT circuit. Afterwards, this analysis is extended by including further elements from real DPT applications to increase the consistency of the error estimation with practical situations and setups. Both methods are compared and their individual advantages and drawbacks are discussed. Finally, a recommendation on when to use which method is derived.

With the debates on climate change and sustainability, a reduction of the share of cars in the modal split has become increasingly prevalent in both public and academic discourse. Besides some motivational approaches, there is a lack of ICT artifacts that successfully raise the ability of consumers to adopt sustainable mobility patterns. To further understand the requirements and the design of these artifacts within everyday mobility adopted a practice-lens. This lens is helpful to get a broader perspective on the use of ICT artifacts along consumers’ transformational journey towards sustainable mobility practices. Based on 12 retrospective interviews with car-free mobility consumers, we argue that artifacts should not be viewed as ’magic-bullet’ solutions but should accompany the complex transformation of practices in multifaceted ways. Moreover, we highlight in particular the difficulties of appropriating shared infrastructures and aligning own practices with them. This opens up a design space to provide more support for these kinds of material-interactions, to provide access to consumption infrastructures and make them usable, rather than leaving consumers alone with increased motivation.

Die digitale Transformation verändert die internationale Kooperation der Hochschulen massiv. Über die Möglichkeiten der virtuellen Mobilität hinaus entstehen neue Themenfelder, die internationale Lern- und Lehrerlebnisse mit digitaler Unterstützung verändern, ergänzen oder neu ermöglichen. Dazu sind im Bereich der Förderung der Internationalisierung (DAAD, Erasmus+, BMBF u.a.) Projekte und Förderformate entstanden, die Digitalisierung und Internationalisierung kombinieren und die neuen Themenstellungen adressieren, z.B. didaktische Formate, administrative Prozesse (auch im Kontext OZG und DSGVO), virtuelle und hybride Mobilität, internationale Projekt- und Teamformate sowie schlussendlich auch Inhalte, die internationale, interkulturelle und interdisziplinäre Kompetenzen mit digitalen Kompetenzen verbinden. Der vorgeschlagene Workshop soll entsprechende Projekte zusammenbringen und die Themen strukturieren, um einen Überblick der Entwicklungen zu schaffen und somit einen Beitrag zur Definition des Themenfelds „Digitalisierung & Internationalisierung“ zu leisten.

The synthesis and characterization of a new class of 1,2,4-oxadiazolylpyridinium as a cationic scaffold for fluorinated ionic liquid crystals is herein described. A series of 12 fluorinated heterocyclic salts based on a 1,2,4-oxadiazole moiety, connected through its C(5) or C(3) to an N-alkylpyridinium unit and a perfluoroheptyl chain, differing in the length of the alkyl chain and counterions, has been synthesized. As counterions iodide, bromide and bis(trifluoromethane)sulfonimide have been considered. The synthesis, structure, and liquid crystalline properties of these compounds are discussed on the basis of the tuned structural variables. The thermotropic properties of this series of salts have been investigated by differential scanning calorimetry and polarized optical microscopy. The results showed the existence of an enantiotropic mesomorphic smectic liquid crystalline phase for six bis(trifluoromethane)sulfonimide salts.

Die Implementierung strategischer Erfolgsfaktoren rückt zunehmend in den Fokus kleiner und mittelständischer Unternehmen. Vor dem Hintergrund des überdurchschnittlichen Erfolgs sogenannter Hidden Champions (HC) stellt sich unter einer praxisorientierten Perspektive die Frage, welche Bedeutung mittelständische Unternehmen grundsätzlich den von Hermann Simon identifizierten Erfolgsprinzipien für HC für den Unternehmenserfolg zumessen. Die empirische Studie analysierte dazu die Bedeutung dieser Erfolgsfaktoren für mittelständische Unternehmen und untersuchte, ob Bedeutungsunterschiede zwischen erfolgreichen und weniger erfolgreichen Unternehmen der Stichprobe existieren. Im Rahmen einer explorativen, multivariaten Datenanalyse konnten außerdem zwei Cluster, die „Internationalen Innovatoren“ und die „Nationalen Traditionalisten“, im Datensatz identifiziert werden, die sich hinreichend in der Bedeutungszumessung der Erfolgsfaktoren voneinander unterschieden.

We analyze short-term effects of free hospitalization insurance for the poorest quintile of the population in the province of Khyber Pakhtunkhwa, Pakistan. First, we exploit that eligibility is based on an exogenous poverty score threshold and apply a regression discontinuity design. Second, we exploit imperfect rollout and compare insured and uninsured households using propensity score matching. With both methods we fail to detect significant effects on the incidence of hospitalization. Whereas the program did not meaningfully increase the quantity of health care consumed, insured households more often choose private hospitals, indicating a shift towards higher perceived quality of care.

Der Einsatz von Remote-Laboren in ingenieurwissenschaftlichen Studiengängen ermöglicht Studierenden an einigen Hochschulen die ortsunabhängige Nutzung von Laboren, Maschinen und Robotern. Remote-Labore eignen sich in besonderer Weise dafür, den digitalisierungsbedingten Anforderungen und dem Qualifikationsbedarf aus Wirtschaft und Industrie zu begegnen. Die Onlinebedienung von Laboren bietet viele Ansatzpunkte für den Erwerb digitaler Kompetenzen, wie beispielsweise das Sammeln und Analysieren von Big Data, das Entwickeln geeigneter Schnittstellen für den Onlinezugriff oder den korrekten Einsatz zur Verfügung stehender softwarebasierter Messtechnik. Auch während der Coronapandemie im Sommersemester 2020, als der reguläre Zugang zu Laboren aufgrund der Kontaktbeschränkungen nicht erlaubt war, ermöglichten Remote-Labore den Studierenden praktische Erfahrungen. Jedoch stellen nicht nur die didaktischen, sondern auch die technischen und organisatorischen Aspekte ingenieurwissenschaftliche Studiengänge bei der Umsetzung von Remote-Laboren vor anspruchsvolle Aufgaben. Der nachfolgende Beitrag greift diese Aspekte auf und beschreibt anhand ausgewählter Beispiele, wie die Umsetzung und Integration von Remote-Laboren in Studium und Lehre gelingen kann, aber auch welche Herausforderungen nach wie vor bestehen.

Soil nutrient depletion threatens global food security and has been seriously underestimated for potassium (K) and several micronutrients. This is particularly the case for highly weathered soils in tropical countries, where classical soluble fertilizers are often not affordable or not accessible. One way to replenish macro- and micronutrients are ground silicate rock powders (SRPs). Rock forming silicate minerals contain most nutrients essential for higher plants, yet slow and inconsistent weathering rates have restricted their use in the past. Recent findings, however, challenge past agronomic objections which insufficiently addressed the factorial complexity of the weathering process. This review therefore first presents a framework with the most relevant factors for the weathering of SRPs through which several outcomes of prior studies can be explained. A subsequent analysis of 48 crop trials reveals the potential as alternative K source and multi-nutrient soil amendment for tropical soils, whereas the benefits for temperate soils are currently inconclusive. Beneficial results prevail for mafic and ultramafic rocks like basalts and rocks containing nepheline or glauconite. Several rock modifications are highly efficient in increasing the agronomic effectiveness of SRPs. Enhanced weathering of SRPs could additionally sequester substantial amounts of CO2 from the atmosphere and silicon (Si) supply can induce a broad spectrum of plant biotic and abiotic stress resistance. Recycling massive amounts of rock residues from domestic mining industries could furthermore resolve serious disposal challenges and improve fertilizer self-sufficiency. In conclusion, under the right circumstances, SRPs could not only advance low-cost and regional soil sustaining crop production but contribute to various sustainable development goals.

The ability to discriminate between different ionic species, termed ion selectivity, is a key feature of ion channels and forms the basis for their physiological function. Members of the degenerin/epithelial sodium channel (DEG/ENaC) superfamily of trimeric ion channels are typically sodium selective, but to a surprisingly variable degree. While acid-sensing ion channels (ASICs) are weakly sodium selective (sodium:potassium ratio ∼10:1), ENaCs show a remarkably high preference for sodium over potassium (>500:1). This discrepancy may be expected to originate from differences in the pore-lining second transmembrane segment (M2). However, these show a relatively high degree of sequence conservation between ASICs and ENaCs, and previous functional and structural studies could not unequivocally establish that differences in M2 alone can account for the disparate degrees of ion selectivity. By contrast, surprisingly little is known about the contributions of the first transmembrane segment (M1) and the preceding pre-M1 region. In this study, we used conventional and noncanonical amino acid-based mutagenesis in combination with a variety of electrophysiological approaches to show that the pre-M1 and M1 regions of mASIC1a channels are major determinants of ion selectivity. Mutational investigations of the corresponding regions in hENaC show that these regions contribute less to ion selectivity, despite affecting ion conductance. In conclusion, our work suggests that the remarkably different degrees of sodium selectivity in ASICs and ENaCs are achieved through different mechanisms. These results further highlight how M1 and pre-M1 are likely to differentially affect pore structure in these related channels.

Risk-based authentication (RBA) aims to strengthen password-based authentication rather than replacing it. RBA does this by monitoring and recording additional features during the login process. If feature values at login time differ significantly from those observed before, RBA requests an additional proof of identification. Although RBA is recommended in the NIST digital identity guidelines, it has so far been used almost exclusively by major online services. This is partly due to a lack of open knowledge and implementations that would allow any service provider to roll out RBA protection to its users. To close this gap, we provide a first in-depth analysis of RBA characteristics in a practical deployment. We observed N=780 users with 247 unique features on a real-world online service for over 1.8 years. Based on our collected data set, we provide (i) a behavior analysis of two RBA implementations that were apparently used by major online services in the wild, (ii) a benchmark of the features to extract a subset that is most suitable for RBA use, (iii) a new feature that has not been used in RBA before, and (iv) factors which have a significant effect on RBA performance. Our results show that RBA needs to be carefully tailored to each online service, as even small configuration adjustments can greatly impact RBA's security and usability properties. We provide insights on the selection of features, their weightings, and the risk classification in order to benefit from RBA after a minimum number of login attempts.

The clear-sky radiative effect of aerosol–radiation interactions is of relevance for our understanding of the climate system. The influence of aerosol on the surface energy budget is of high interest for the renewable energy sector. In this study, the radiative effect is investigated in particular with respect to seasonal and regional variations for the region of Germany and the year 2015 at the surface and top of atmosphere using two complementary approaches. First, an ensemble of clear-sky models which explicitly consider aerosols is utilized to retrieve the aerosol optical depth and the surface direct radiative effect of aerosols by means of a clear-sky fitting technique. For this, short-wave broadband irradiance measurements in the absence of clouds are used as a basis. A clear-sky detection algorithm is used to identify cloud-free observations. Considered are measurements of the short-wave broadband global and diffuse horizontal irradiance with shaded and unshaded pyranometers at 25 stations across Germany within the observational network of the German Weather Service (DWD). The clear-sky models used are the Modified MAC model (MMAC), the Meteorological Radiation Model (MRM) v6.1, the Meteorological–Statistical solar radiation model (METSTAT), the European Solar Radiation Atlas (ESRA), Heliosat-1, the Center for Environment and Man solar radiation model (CEM), and the simplified Solis model. The definition of aerosol and atmospheric characteristics of the models are examined in detail for their suitability for this approach. Second, the radiative effect is estimated using explicit radiative transfer simulations with inputs on the meteorological state of the atmosphere, trace gases and aerosol from the Copernicus Atmosphere Monitoring Service (CAMS) reanalysis. The aerosol optical properties (aerosol optical depth, Ångström exponent, single scattering albedo and asymmetry parameter) are first evaluated with AERONET direct sun and inversion products. The largest inconsistency is found for the aerosol absorption, which is overestimated by about 0.03 or about 30 % by the CAMS reanalysis. Compared to the DWD observational network, the simulated global, direct and diffuse irradiances show reasonable agreement within the measurement uncertainty. The radiative kernel method is used to estimate the resulting uncertainty and bias of the simulated direct radiative effect. The uncertainty is estimated to −1.5 ± 7.7 and 0.6 ± 3.5 W m−2 at the surface and top of atmosphere, respectively, while the annual-mean biases at the surface, top of atmosphere and total atmosphere are −10.6, −6.5 and 4.1 W m−2, respectively. The retrieval of the aerosol radiative effect with the clear-sky models shows a high level of agreement with the radiative transfer simulations, with an RMSE of 5.8 W m−2 and a correlation of 0.75. The annual mean of the REari at the surface for the 25 DWD stations shows a value of −12.8 ± 5 W m−2 as the average over the clear-sky models, compared to −11 W m−2 from the radiative transfer simulations. Since all models assume a fixed aerosol characterization, the annual cycle of the aerosol radiation effect cannot be reproduced. Out of this set of clear-sky models, the largest level of agreement is shown by the ESRA and MRM v6.1 models.

Over the last decades, different kinds of design guides have been created to maintain consistency and usability in interactive system development. However, in the case of spatial applications, practitioners from research and industry either have difficulty finding them or perceive such guides as lacking relevance, practicability, and applicability. This paper presents the current state of scientific research and industry practice by investigating currently used design recommendations for mixed reality (MR) system development. We analyzed and compared 875 design recommendations for MR applications elicited from 89 scientific papers and documentation from six industry practitioners in a literature review. In doing so, we identified differences regarding four key topics: Focus on unique MR design challenges, abstraction regarding devices and ecosystems, level of detail and abstraction of content, and covered topics. Based on that,we contribute to the MR design research by providing three factors for perceived irrelevance and six main implications for design recommendations that are applicable in scientific and industry practice.

Aim: To understand how transcriptional factors Pdr1 and Pdr3, belonging to the pleiotropic drug resistance system, are activated, and regulated after introducing chemical toxins to the cell in the model organism Saccharomyces cerevisiae. Methods: Series of molecular methods were applied using different strains of S. cerevisiae over-expressing proteins of interest as a eukaryotic cell model. The chemical stress introduced to the cell is represented by menadione. Results were obtained performing protein detection and analysis. Additionally, the regulation of the DNA binding of the transcriptional activators after stimulation is quantified using chromatin immunoprecipitation, employing epitope-tagged factors and real-time qPCR. Results: Our results indicated higher expression levels of the Pdr1 transcriptional factor, compared to its homologous Pdr3 after treatment with menadione. The yeast-cell defence system was tested against various organic solvents to exclude the possibility of their presence potentially affecting the results. The results indicate that Pdr1 is most abundant after 30 minutes from the beginning of the treatment, compared with 240 minutes after the treatment when the function of the transcription factor is faded. It appears that Pdr1 binding to the PDR5 and SNQ2 promoters, which are both activated by Pdr1, peaks around the same time, or more precisely after 40 minutes from the start of the treatment. Conclusion: The tendency of Pdr1 reduction after its activation by menadione is detected. One possibility is that Pdr1, after recognizing the xenobiotic menadione, is removed by a degradation mechanism. Given the fact that Pdr1 directly binds the xenobiotic molecule, its destruction might help the cells to remove toxic levels of menadione. It is possible that overexpressing the part of Pdr1 which recognizes menadione alone was sufficient to detoxify and hence produce a tolerance towards menadione.