Refine
H-BRS Bibliography
- yes (42) (remove)
Departments, institutes and facilities
- Fachbereich Angewandte Naturwissenschaften (42) (remove)
Document Type
- Article (23)
- Conference Object (10)
- Part of a Book (3)
- Doctoral Thesis (3)
- Book (monograph, edited volume) (2)
- Report (1)
Year of publication
- 2015 (42) (remove)
Keywords
- TNT (2)
- 3D activity landscapes (1)
- ATF4 (1)
- ATF6 (1)
- Adipose tissue-derived stem cells (1)
- Analytik (1)
- Apple replant disease (1)
- Asymmetric cell division (1)
- Automotive Industry (1)
- Autophagy induction (1)
In der vorliegenden Arbeit wird ein neuartiges Verfahren zur Echtzeitüberwachung von Laserbohrprozessen vorgestellt. Die Untersuchungen werden an unterschiedlichen Materialien unter Einsatz eines passiv-gütegeschalteten Nd:YAG Lasers durchgeführt. Prozessbegleitend findet eine Aufzeichnung der akustischen Emissionen mit anschließender Analyse durch schnelle Fourier-Transformation statt. Hierdurch lassen sich der Durchbruch beim Bohren durch ein Material sowie der Materialübergang mehrschichtiger Systeme detektieren. Die akustischen Messungen werden durchAuswertung der Pulsfolge des Lasers mittels einer Fotodiode gestützt. Hierbei zeigt sich eine gute Übereinstimmung der im akustischen Spektrum dominanten Frequenz mit der jeweils im Laserburstauftretenden Pulsfrequenz. Das vorgestellte Verfahren ermöglicht eine Echtzeitüberwachung beim Laserbohren mittels kostengünstiger und einfacher Hardware. Zudem zeichnet es sich im Gegensatz zu bestehenden Verfahren durch eine hohe Robustheit gegen äußere Störeinflüsse aus, da eine frequenzbasierte Auswertung stattfindet.
This book chapter describes application examples of gas chromatography/mass spectrometry and pyrolysis – gas chromatography/mass spectrometry in failure analysis for the identification of chemical materials like mineral oils and nitrile rubber gaskets. Furthermore, failure cases demanding identification of polymers/copolymers in fouling on the compressor wall of a car air conditioner and identification of fouling on the surface of a bearing race from the automotive industry are demonstrated. The obtained analytical results were then used for troubleshooting and remedial action of the technological process.
Detection of triacetone triperoxide using temperature cycled metal-oxide semiconductor gas sensors
(2015)
It is know that mesenchymal stem cells (MSCs) actively secretemultiple biologically-active factors during their process of differentiation which gives rise to a variey of cytotypes including bone and fatcells. It is also acknowledged that the chemokines secreted throughoutMSC differentiation may play an important role in the development and growth of tumor cells, although literature data appear somewhat indeterminate due to the contradictory evidence often found.
Sweet sorghum (Sorghum bicolor (L.) moench), a crop that is grown by subsistence farmers in Zimbabwe was used to extract silica gel in order to assess its possible use as a raw material for the production of silica-based products. The gel was prepared from sodium silicate extracted from sweet sorghum bagasse ash by sodium hydroxide leaching. Results show that maximum yield can be obtained at pH 5 and with 3 M sodium concentration. The silica gel prepared at optimum pH 5 had a bulk density of 0.5626 g/cm3 and anestimated porosity of 71.87%. Silica gel aged over 10 h had improved moisture adsorption properties. X-ray fluorescence (XRF) determinations show that the silica content in the ash is 40.1%. Characterization of sweet sorghum ash and silica gels produced at pH 5, 7 and 8.5 by Fourier Transform Infrared spectroscopy gave absorption bands similar to those reported by other researchers.Transmission electron micrographs show that silica prepared under optimum conditions is amorphous and consisted of irregular particles. Sweet sorghum proved to be a potential low cost raw material for the production of silica gel.