Refine
H-BRS Bibliography
- yes (93) (remove)
Departments, institutes and facilities
- Institut für Sicherheitsforschung (ISF) (93) (remove)
Document Type
- Article (43)
- Conference Object (34)
- Report (5)
- Doctoral Thesis (3)
- Patent (3)
- Contribution to a Periodical (2)
- Part of a Book (1)
- Conference Proceedings (1)
- Research Data (1)
Year of publication
Keywords
- Chemometrics (4)
- DNA typing (3)
- Raman spectroscopy (3)
- Classification (2)
- Cooperative Awareness Message (2)
- Discriminant analysis (2)
- Hyperspectral image (2)
- Intelligent Transport System (2)
- Principal Components Analysis (2)
- Privacy (2)
Microorganisms not only contribute to the spoilage of food but can also cause illnesses through consumption. Consumer concerns and doubts about the shelf life of the products and the resulting enormous amounts of food waste have led to a demand for a rapid, robust, and non-destructive method for the detection of microorganisms, especially in the food sector. Therefore, a rapid and simple sampling method for the Raman- and infrared (IR)-microspectroscopic study of microorganisms associated with spoilage processes was developed. For subsequent evaluation pre-processing routines, as well as chemometric models for classification of spoilage microorganisms were developed. The microbiological samples are taken using a disinfectable sampling stamp and measured by microspectroscopy without the usual pre-treatments such as purification separation, washing, and centrifugation. The resulting complex multivariate data sets were pre-processed, reduced by principal component analysis, and classified by discriminant analysis. Classification of independent unlabeled test data showed that microorganisms could be classified at genus, species, and strain levels with an accuracy of 96.5 % (Raman) and 94.5 % (IR), respectively, despite large biological differences and novel sampling strategies. As bacteria are exposed to constantly changing conditions and their adaptation mechanisms may make them inaccessible to conventional measurement methods, the methods and models developed were investigated for their suitability for microorganisms exposed to stress. Compared to normal growth conditions, spectral changes in lipids, polysaccharides, nucleic acids, and proteins were observed in microorganisms exposed to stress. Models were developed to discriminate microorganisms, independent of the involvement of various stress factors and storage times. Classification of the investigated bacteria yielded accuracies of 97.6 % (Raman) and 96.6 % (IR), respectively, and a robust and meaningful model was developed to discriminate different microorganisms at the genus, species, and strain levels. The obtained results are very promising and show that the methods and models developed for the discrimination of microorganisms as well as the investigation of stress factors on microorganisms by means of Raman- and IR-microspectroscopy have the potential to be used, for example, in the food sector for the rapid determination of surface contamination.
Polymer fibers with liquid crystals (LCs) in the core have potential as autonomous sensors of airborne volatile organic compounds (VOCs), with a high surface-to-volume ratio enabling fast and sensitive response and an attractive non-woven textile form factor. We demonstrate their ability to continuously and quantitatively measure the concentration of toluene, cyclohexane, and isopropanol as representative VOCs, via the impact of each VOC on the LC birefringence. The response is fully reversible and repeatable over several cycles, the response time can be as low as seconds, and high sensitivity is achieved when the operating temperature is near the LC-isotropic transition temperature. We propose that a broad operating temperature range can be realized by combining fibers with different LC mixtures, yielding autonomous VOC sensors suitable for integration in apparel or in furniture that can compete with existing consumer-grade electronic VOC sensors in terms of sensitivity and response speed.
In this paper, we introduce an optical sensor system, which is integrated into an industrial push-button. The sensor allows to classify the type of material that is in contact with the button when pressed into different material categories on the basis of the material's so called "spectral signature". An approach for a safety sensor system at circular table saws on the same base has been introduced previously on SIAS-2007. This contactless working sensor is able to distinguish reliably between skin, textiles, leather and various other kinds of materials. A typical application for this intelligent push-button is the use at possibly dangerous machines, whose operating instructions include either the prohibition or the obligation to wear gloves during the work at the machine. An exemple of machines at which no gloves are allowed are pillar drilling machines, because of the risk of getting caught in the drill chuck and being turned in by the machine. In many cases this causes very serious hand injuries. Depending on the application needs, the sensor system integrated into the push-button can be configured flexibly by software to prevent the operator from accidentally starting a machine with or without gloves, which can decrease the risk of severe accidents significantly. Especially two-hand controls are incentive to manipulation for easier handling. By equipping both push-buttons of a two-hand control with material classification properties, the user is forced to operate the controls with his bare fingers. That limitation disallows the manipulation of a two-hand control by a simple rodding device.
A series of reactive binaphthyl‐diimine‐based dopants is prepared and investigated with respect to their potential for the chiral induction of structural coloration in nematic liquid crystal mixture E7 and the selective photonic sensing of nitrogen dioxide (NO2). Studies of the helical twisting power (HTP) in 4‐cyano‐4′‐pentylbiphenyl (5CB) reveal HTP values as high as 375 µm‐1 and the tremendous impact of structural compatibility and changes of the dihedral binaphthyl angle on the efficiency of the chiral transfer. Detailed investigation of the sensing capabilities of the systems reveals an extraordinarily high selectivity for NO2 and a response to concentrations as low as 100 ppm. The systems show a direct response to the analyte gas leading to a concentration‐dependent shift of the reflectance wavelength of up to several hundred nanometers. Incorporation of copper ions remarkably improves the sensor's properties in terms of sensitivity and selectivity, enabling the tailored tweaking of the system's properties.
Sensoren können verschiedene Aufgaben erfüllen, wie beispielsweise die Optimierung von Prozessen, die Interaktion zwischen Geräten oder die Verbesserung der zivilen Sicherheit. [1–3] Ihr Bedarf für die Industrie oder den Alltag wächst seit Jahren stetig. Besonders mobile Gassensoren sind von großem Interesse. Jedoch ist ihre Anwendung meist durch ihre integrierte Batterie begrenzt. Gassensoren ohne oder mit einem nur sehr geringen Energieverbrauch stehen daher im Interesse bei neuen Anwendungsgebieten, beispielsweise im Brandschutz oder in der Textilindustrie. [4,5] Die Sensoren könnten zum Beispiel in die Textilien einer persönlichen Schutzausrüstung eingearbeitet werden und durch einen Farbumschlag die Anwesenheit eines Gases oder die Überschreitung des Grenzwertes toxischer Substanzen anzeigen.
P30 - Das Elektrospinnen von halbleitenden Zinndioxidfasern für die Detektion von Wasserstoff
(2022)
Das Ziel dieser Arbeit ist die Entwicklung von dünnen keramischen Fasern als halbleitendes Sensormaterial zum Nachweis von Wasserstoff, möglichst bei Zimmertemperatur. Die elektrische Leitfähigkeit halbleitender Metalloxide ändert sich durch die Einwirkung von oxidierenden und reduzierenden Gasen auf die Oberfläche des Metalloxids. Dieser Effekt kann zur Messung der Gaskonzentration genutzt werden. Die Reaktion von Zinn(IV)-oxid mit Wasserstoff basiert auf der Reduktion des Zinn(IV)-oxids zum Zinn, wobei die Elektronen des Zinn(IV)-oxids im metallischen Zinn verbleiben und dort im nicht gebundenen Zustand zu einer Leitfähigkeitserhöhung beitragen. Die Reaktion des Wasserstoffes kann sowohl mit den Sauerstoffatomen des Oxids als auch mit adsorbierten Sauerstoffatomen an der Oxidoberfläche stattfinden.[ 6] Da die Reaktionen an der Oberfläche des Oxids stattfinden, sollten Sensoren mit einer großen Oberfläche im Vergleich zu metalloxidischen Bulkmaterialien eine höhere Empfindlichkeit aufweisen. [3] Die Verwendung von Fasern anstelle von Dünn- oder Dickschichten führt dabei zu einer besseren Sensitivität gegenüber Gasen.
Durch Dotierung eines nematischen Flüssigkristalles mit einer chiralen Substanz wird eine helikal strukturierte Phase induziert, die in der Lage ist, einfallendes Licht wellenlängenselektiv zu reflektieren. Bei der Reaktion des Dotiermittels mit einem gasförmigen Analyten verändern sich die Ganghöhe dieser Struktur und damit die reflektierte Wellenlänge. Liegt diese im Bereich des sichtbaren Lichts, ist eine Farbänderung mit dem menschlichen Auge zu beobachten. Es ist dabei sinnvoll den Flüssigkristall z.B. in einem Polymer einzukapseln, um ihn vor mechanischen Einflüssen und Umwelteinflüssen zu schützen. Eine Möglichkeit zur Einkapselung ist das koaxiale Elektrospinnen. Vorteile sind unter anderem die Realisierung einer großen Oberfläche und einer sehr geringen Wanddicke der schützenden Schale, die die Diffusion von Gasen durch die Wand hindurch ermöglicht. Um die Funktionsfähigkeit eines solchen Sensors zu testen, wurde ein CO2-sensitiver Flüssigkristall verwendet. Dieser wurde in eine Schale aus Polyvinylpyrrolidon (PVP) versponnen und die Reaktion mit CO2 spektroskopisch analysiert.
Optical gas sensors based on chiral-nematic liquid crystals (N* LCs) forming one-dimensional photonic crystals do not require electrical energy and have a considerable potential to supplement established types of sensors. A chiral-nematic phase with tunable selective reflection is induced in a nematic host LC by adding reactive chiral dopants. The selective chemical reaction between dopant and analyte is capable to vary the pitch length (the lattice constant) of the soft, self-assembled, one-dimensional photonic crystal. The progress of the ongoing chemical reaction can be observed even by naked eye because the color of the samples varies. In this work, we encapsulate the responsive N* LC in microscale polyvinylpyrrolidone (PVP) fibers via coaxial electrospinning. The sensor is, thus, given a solid form and has an improved stability against nonavoidable environmental influences. The reaction behavior of encapsulated and nonencapsulated N* LC toward a gaseous analyte is compared, systematically. Making use of the encapsulation is an important step to improve the applicability.
Entering the work envelope of an industrial robot can lead to severe injury from collisions with moving parts of the system. Conventional safety mechanisms therefore mostly restrict access to the robot using physical barriers such as walls and fences or non-contact protective devices including light curtains and laser scanners. As none of these mechanisms applies to human-robot-collaboration (HRC), a concept in which human and machine complement one another by working hand in hand, there is a rising need for safe and reliable detection of human body parts amidst background clutter. For this application camera-based systems are typically well suited. Still, safety concerns remain, owing to possible detection failures caused by environmental occlusion, extraneous light or other adverse imaging conditions. While ultrasonic proximity sensing can provide physical diversity to the system, it does not yet allow to reliably distinguish relevant objects from background objects.This work investigates a new approach to detecting relevant objects and human body parts based on acoustic holography. The approach is experimentally validated using a low-cost application-specific ultrasonic sensor system created from micro-electromechanical systems (MEMS). The presented results show that this system far outperforms conventional proximity sensors in terms of lateral imaging resolution and thus allows for more intelligent muting processes without compromising the safety of people working close to the robot. Based upon this work, a next step could be the development of a multimodal sensor systems to safeguard workers who collaborate with robots using the described ultrasonic sensor system.
Persons entering the working range of industrial robots are exposed to a high risk of collision with moving parts of the system, potentially causing severe injuries. Conventional systems, which restrict the access to this area, range from walls and fences to light barriers and other vision based protective devices (VBPD). None of these systems allow to distinguish between humans and workpieces in a safe and reliable manner. In this work, a new approach is investigated, which uses an active near-infrared (NIR) camera system with advanced capabilities of skin detection to distinguish humans from workpieces based on characteristic spectral signatures. This approach allows to implement more intelligent muting processes and at the same time increases the safety of persons working close to the robots. The conceptual integration of such a camera system into a VBPD and the enhancement of person detection methods through skin detection are described and evaluated in this paper. Based upon this work, next steps could be the development of multimodal sensor systems to safeguard working ranges of collaborating robots using the described camera system.
Modern PCR-based analytical techniques have reached sensitivity levels that allow for obtaining complete forensic DNA profiles from even tiny traces containing genomic DNA amounts as small as 125 pg. Yet these techniques have reached their limits when it comes to the analysis of traces such as fingerprints or single cells. One suggestion to overcome these limits has been the usage of whole genome amplification (WGA) methods. These methods aim at increasing the copy number of genomic DNA and by this means generate more template DNA for subsequent analyses. Their application in forensic contexts has so far remained mostly an academic exercise, and results have not shown significant improvements and even have raised additional analytical problems. Until very recently, based on these disappointments, the forensic application of WGA seems to have largely been abandoned. In the meantime, however, novel improved methods are pointing towards a perspective for WGA in specific forensic applications. This review article tries to summarize current knowledge about WGA in forensics and suggests the forensic analysis of single-donor bioparticles and of single cells as promising applications.
A deployment of the Vehicle-2-Vehicle communication technology according to ETSI is in preparation in Europe. Currently, a policy for a necessary Public Key Infrastructure to enrol cryptographic keys and certificates for vehicles and infrastructure component is in discussion to enable an interoperable Vehicle-2-Vehicle communication. Vehicle-2-Vehicle communication means that vehicles periodically send Cooperative Awareness Messages. These messages contain the current geographic position, driving direction, speed, acceleration, and the current time of a vehicle. To protect privacy (location privacy, “speed privacy”) of vehicles and drivers ETSI provides a specific pseudonym concept. We show that the Vehicle-2-Vehicle communication can be misused by an attacker to plot a trace of sequent Cooperative Awareness Messages and to link this trace to a specific vehicle. Such a trace is non-disputable due to the cryptographic signing of the messages. So, the periodically sending of Cooperative Awareness Messages causes privacy problems even if the pseudonym concept is applied.