Refine
H-BRS Bibliography
- yes (57) (remove)
Departments, institutes and facilities
- Fachbereich Angewandte Naturwissenschaften (57) (remove)
Document Type
- Article (42)
- Doctoral Thesis (6)
- Book (monograph, edited volume) (3)
- Conference Object (3)
- Part of a Book (2)
- Report (1)
Year of publication
- 2020 (57) (remove)
Keywords
- Inborn error of metabolism (3)
- Organic aciduria (3)
- Crystallinity (2)
- Ketone body (2)
- Metabolic acidosis (2)
- cytokine-induced killer cells (2)
- ACAT1 (1)
- ADP release (1)
- AOP (1)
- ASIC (1)
Due to the use of fossil fuel resources, many environmental problems have been increasingly growing. Thus, the recent research focuses on the use of environment friendly materials from sustainable feedstocks for future fuels, chemicals, fibers and polymers. Lignocellulosic biomass has become the raw material of choice for these new materials. Recently, the research has focused on using lignin as a substitute material in many industrial applications. The antiradical and antimicrobial activity of lignin and lignin-based films are both of great interest for applications such as food packaging additives. DPPH assay was used to determine the antioxidant activity of Kraft lignin compared to Organosolv lignins from different biomasses. The purification procedure of Kraft lignin showed that double-fold selective extraction is the most efficient confirmed by UV-Vis, FTIR, HSQC, 31PNMR, SEC, and XRD. The antioxidant capacity was discussed regarding the biomass source, pulping process, and degree of purification. Lignin obtained from industrial black liquor are compared with beech wood samples: Biomass source influences the DPPH inhibition (softwood > grass) and the TPC (softwood < grass). DPPH inhibition affected by the polarity of the extraction solvent. Following the trend: ethanol > diethylether > acetone. Reduced polydispersity has positive influence on the DPPH inhibition. Storage decreased the DPPH inhibition but increased the TPC values. The DPPH assay was also used to discuss the antiradical activity of HPMC/lignin and HPMC/lignin/chitosan films. In both binary (HPMC/lignin) and ternary (HPMC/lignin/chitosan) systems the 5% addition showed the highest activity and the highest addition had the lowest. Both scavenging activity and antimicrobial activity are dependent on the biomass source; Organosolv of softwood > Kraft of softwood > Organosolv of grass. Lignins and lignin-containing films showed high antimicrobial activities against Gram-positive and Gram-negative bacteria at 35 °C and at low temperatures (0-7 °C). Purification of Kraft lignin has a negative effect on the antimicrobial activity while storage has positive effect. The lignin leaching in the produced films affected the activity positively and the chitosan addition enhances the activity for both Gram-positive and Gram-negative bacteria. Testing the films against food spoilage bacteria that grow at low temperatures revealed the activity of the 30% addition on HPMC/L1 film against both B. thermosphacta and P. fluorescens while L5 was active only against B. thermosphacta. In HPMC/lignin/chitosan films, the 5% addition exhibited activity against both food spoilage bacteria.
Among the celestial bodies in the Solar System, Mars currently represents the main target for the search for life beyond Earth. However, its surface is constantly exposed to high doses of cosmic rays (CRs) that may pose a threat to any biological system. For this reason, investigations into the limits of resistance of life to space relevant radiation is fundamental to speculate on the chance of finding extraterrestrial organisms on Mars. In the present work, as part of the STARLIFE project, the responses of dried colonies of the black fungus Cryomyces antarcticus Culture Collection of Fungi from Extreme Environments (CCFEE) 515 to the exposure to accelerated iron (LET: 200 keV/μm) ions, which mimic part of CRs spectrum, were investigated. Samples were exposed to the iron ions up to 1000 Gy in the presence of Martian regolith analogues. Our results showed an extraordinary resistance of the fungus in terms of survival, recovery of metabolic activity and DNA integrity. These experiments give new insights into the survival probability of possible terrestrial-like life forms on the present or past Martian surface and shallow subsurface environments.
With increasing life expectancy, demands for dental tissue and whole-tooth regeneration are becoming more significant. Despite great progress in medicine, including regenerative therapies, the complex structure of dental tissues introduces several challenges to the field of regenerative dentistry. Interdisciplinary efforts from cellular biologists, material scientists, and clinical odontologists are being made to establish strategies and find the solutions for dental tissue regeneration and/or whole-tooth regeneration. In recent years, many significant discoveries were done regarding signaling pathways and factors shaping calcified tissue genesis, including those of tooth. Novel biocompatible scaffolds and polymer-based drug release systems are under development and may soon result in clinically applicable biomaterials with the potential to modulate signaling cascades involved in dental tissue genesis and regeneration. Approaches for whole-tooth regeneration utilizing adult stem cells, induced pluripotent stem cells, or tooth germ cells transplantation are emerging as promising alternatives to overcome existing in vitro tissue generation hurdles. In this interdisciplinary review, most recent advances in cellular signaling guiding dental tissue genesis, novel functionalized scaffolds and drug release material, various odontogenic cell sources, and methods for tooth regeneration are discussed thus providing a multi-faceted, up-to-date, and illustrative overview on the tooth regeneration matter, alongside hints for future directions in the challenging field of regenerative dentistry.
Miscanthus crops possess very attractive properties such as high photosynthesis yield and carbon fixation rate. Because of these properties, it is currently considered for use in second-generation biorefineries. Here we analyze the differences in chemical composition between M. x giganteus, a commonly studied Miscanthus genotype, and M. nagara, which is relatively understudied but has useful properties such as increased frost resistance and higher stem stability. Samples of M. x giganteus (Gig35) and M. nagara (NagG10) have been separated by plant portion (leaves and stems) in order to isolate the corresponding lignins. The organosolv process was used for biomass pulping (80% ethanol solution, 170 °C, 15 bar). Biomass composition and lignin structure analysis were performed using composition analysis, Fourier-transform infrared (FTIR), ultraviolet-visible (UV-Vis) and nuclear magnetic resonance (NMR) spectroscopy, thermogravimetric analysis (TGA), size exclusion chromatography (SEC) and pyrolysis gas-chromatography/mass spectrometry (Py-GC/MS) to determine the 3D structure of the isolated lignins, monolignol ratio and most abundant linkages depending on genotype and harvesting season. SEC data showed significant differences in the molecular weight and polydispersity indices for stem versus leaf-derived lignins. Py-GC/MS and hetero-nuclear single quantum correlation (HSQC) NMR revealed different monolignol compositions for the two genotypes (Gig35, NagG10). The monolignol ratio is slightly influenced by the time of harvest: stem-derived lignins of M. nagara showed increasing H and decreasing G unit content over the studied harvesting period (December–April).
Coumarin as a structural component of substrates and probes for serine and cysteine proteases
(2020)
Surface-enhanced Raman spectroscopy (SERS) with subsequent chemometric evaluation was performed for the rapid and non-destructive differentiation of seven important meat-associated microorganisms, namely Brochothrix thermosphacta DSM 20171, Pseudomonas fluorescens DSM 4358, Salmonella enterica subsp. enterica sv. Enteritidis DSM 14221, Listeria monocytogenes DSM 19094, Micrococcus luteus DSM 20030, Escherichia coli HB101 and Bacillus thuringiensis sv. israelensis DSM 5724. A simple method for collecting spectra from commercial paper-based SERS substrates without any laborious pre-treatments was used. In order to prepare the spectroscopic data for classification at genera level with a subsequent chemometric evaluation consisting of principal component analysis and discriminant analysis, a pre-processing method with spike correction and sum normalisation was performed. Because of the spike correction rather than exclusion, and therefore the use of a balanced data set, the multivariate analysis of the data is significantly resilient and meaningful. The analysis showed that the differentiation of meat-associated microorganisms and thereby the detection of important meat-related pathogenic bacteria was successful on genera level and a cross-validation as well as a classification of ungrouped data showed promising results, with 99.5 % and 97.5 %, respectively.
The present thesis elucidates the development of (i) a series of small molecule inhibitors reacting in a covalent-irreversible manner with the targeted proteases and (ii) a fluorescently labeled activity-based probe as a pharmacological tool compound for investigation of specific functions of the mentioned enzymes in vitro. Herein, the rational design, organic synthesis and quantitative structure-activity-relationships are described extensively.
Multiwalled carbon nanotubes (MWCNTs) were easily and efficiently functionalised with highly cross-linked polyamines. The radical polymerisation of two bis-vinylimidazolium salts in the presence of pristine MWCNTs and azobisisobutyronitrile (AIBN) as a radical initiator led to the formation of materials with a high functionalisation degree. The subsequent treatment with sodium borohydride gave rise to the reduction of imidazolium moieties with the concomitant formation of secondary and tertiary amino groups. The obtained materials were characterised by thermogravimetric analysis (TGA), elemental analysis, solid state 13C-NMR, Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), potentiometric titration, and temperature programmed desorption of carbon dioxide (CO2-TPD). One of the prepared materials was tested as a heterogeneous base catalyst in C–C bond forming reactions such as the Knoevenagel condensation and Henry reaction. Furthermore, two examples concerning a sequential one-pot approach involving two consecutive reactions, namely Knoevenagel and Michael reactions, were reported.
The motor protein myosin drives a wide range of cellular and muscular functions by generating directed movement and force, fueled through adenosine triphosphate (ATP) hydrolysis. Release of the hydrolysis product adenosine diphosphate (ADP) is a fundamental and regulatory process during force production. However, details about the molecular mechanism accompanying ADP release are scarce due to the lack of representative structures. Here we solved a novel blebbistatin-bound myosin conformation with critical structural elements in positions between the myosin pre-power stroke and rigor states. ADP in this structure is repositioned towards the surface by the phosphate-sensing P-loop, and stabilized in a partially unbound conformation via a salt-bridge between Arg131 and Glu187. A 5 Å rotation separates the mechanical converter in this conformation from the rigor position. The crystallized myosin structure thus resembles a conformation towards the end of the two-step power stroke, associated with ADP release. Computationally reconstructing ADP release from myosin by means of molecular dynamics simulations further supported the existence of an equivalent conformation along the power stroke that shows the same major characteristics in the myosin motor domain as the resolved blebbistatin-bound myosin-II·ADP crystal structure, and identified a communication hub centered on Arg232 that mediates chemomechanical energy transduction.
Background: 3-hydroxy-3-methylglutaryl-coenzyme A lyase deficiency (HMGCLD) is an autosomal recessive disorder of ketogenesis and leucine degradation due to mutations in HMGCL.
Method: We performed a systematic literature search to identify all published cases. Two hundred eleven patients of whom relevant clinical data were available were included in this analysis. Clinical course, biochemical findings and mutation data are highlighted and discussed. An overview on all published HMGCL variants is provided.
Results: More than 95% of patients presented with acute metabolic decompensation. Most patients manifested within the first year of life, 42.4% already neonatally. Very few individuals remained asymptomatic. The neurologic long-term outcome was favorable with 62.6% of patients showing normal development.
Conclusion: This comprehensive data analysis provides a systematic overview on all published cases with HMGCLD including a list of all known HMGCL mutations.
2-methylacetoacetyl-coenzyme A thiolase (beta-ketothiolase) deficiency: one disease - two pathways
(2020)
Background: 2-methylacetoacetyl-coenzyme A thiolase deficiency (MATD; deficiency of mitochondrial acetoacetyl-coenzyme A thiolase T2/ “beta-ketothiolase”) is an autosomal recessive disorder of ketone body utilization and isoleucine degradation due to mutations in ACAT1.
Methods: We performed a systematic literature search for all available clinical descriptions of patients with MATD. Two hundred forty-four patients were identified and included in this analysis. Clinical course and biochemical data are presented and discussed.
Results: For 89.6% of patients at least one acute metabolic decompensation was reported. Age at first symptoms ranged from 2 days to 8 years (median 12 months). More than 82% of patients presented in the first 2 years of life, while manifestation in the neonatal period was the exception (3.4%). 77.0% (157 of 204 patients) of patients showed normal psychomotor development without neurologic abnormalities. Conclusion: This comprehensive data analysis provides a systematic overview on all cases with MATD identified in the literature. It demonstrates that MATD is a rather benign disorder with often favourable outcome, when compared with many other organic acidurias.
The development of metals tailored to the metallurgical conditions of laser-based additive manufacturing is crucial to advance the maturity of these materials for their use in structural applications. While efforts in this regard are being carried out around the globe, the use of high strength eutectic alloys have, so far, received minor attention, although previous works showed that rapid solidification techniques can result in ultrafine microstructures with excellent mechanical performance, albeit for small sample sizes. In the present work, a eutectic Ti-32.5Fe alloy has been produced by laser powder bed fusion aiming at exploiting rapid solidification and the capability to produce bulk ultrafine microstructures provided by this processing technique.
Process energy densities between 160 J/mm³ and 180 J/mm³ resulted in a dense and crack-free material with an oxygen content of ~ 0.45 wt.% in which a hierarchical microstructure is formed by µm-sized η-Ti4Fe2Ox dendrites embedded in an ultrafine eutectic β-Ti/TiFe matrix. The microstructure was studied three-dimensionally using near-field synchrotron ptychographic X-ray computed tomography with an actual spatial resolution down to 39 nm to analyse the morphology of the eutectic and dendritic structures as well as to quantify their mass density, size and distribution. Inter-lamellar spacings down to ~ 30–50 nm were achieved, revealing the potential of laser-based additive manufacturing to generate microstructures smaller than those obtained by classical rapid solidification techniques for bulk materials. The alloy was deformed at 600 °C under compressive loading up to a strain of ~ 30% without damage formation, resulting in a compressive yield stress of ~ 800 MPa.
This study provides a first demonstration of the feasibility to produce eutectic Ti-Fe alloys with ultrafine microstructures by laser powder bed fusion that are suitable for structural applications at elevated temperature.
The simultaneous operation of multiple different semiconducting metal oxide (MOX) gas sensors is demanding for the readout circuitry. The challenge results from the strongly varying signal intensities of the various sensor types to the target gas. While some sensors change their resistance only slightly, other types can react with a resistive change over a range of several decades. Therefore, a suitable readout circuit has to be able to capture all these resistive variations, requiring it to have a very large dynamic range. This work presents a compact embedded system that provides a full, high range input interface (readout and heater management) for MOX sensor operation. The system is modular and consists of a central mainboard that holds up to eight sensor-modules, each capable of supporting up to two MOX sensors, therefore supporting a total maximum of 16 different sensors. Its wide input range is archived using the resistance-to-time measurement method. The system is solely built with commercial off-the-shelf components and tested over a range spanning from 100Ω to 5 GΩ (9.7 decades) with an average measurement error of 0.27% and a maximum error of 2.11%. The heater management uses a well-tested power-circuit and supports multiple modes of operation, hence enabling the system to be used in highly automated measurement applications. The experimental part of this work presents the results of an exemplary screening of 16 sensors, which was performed to evaluate the system’s performance.
Background: Coniferous woods (Abies nordmanniana (Stev.) Spach, Abies procera Rehd, Picea abies (L.) H.Karst, and Picea pungens Engelm.) could contain useful secondary metabolites to produce sustainable packaging materials, e.g., by substitution of harmful petrol-based additives in plastic packaging. This study aims to characterise the antioxidant and light-absorbing properties and ingredients of different coniferous wood extracts with regard to different plant fragments and drying conditions. Furthermore, the valorisation of used Christmas trees is evaluated. Methods: Different drying and extraction techniques were applied with the extracts being characterised by determining the total phenolic content (TPC), total antioxidant capacity (TAC), and absorbance in the ultraviolet range (UV). Gas chromatography coupled with mass spectrometry (GC-MS) and an acid–butanol assay (ABA) were used to characterise the extract constituents. Results: All the extracts show a considerably high UV absorbance while interspecies differences did occur. All the fresh and some of the dried biomass extracts reached utilisable TAC and TPC values. A simplified extraction setup for industrial application is evaluated; comparable TAC results could be reached with modifications. Conclusion: Coniferous woods are a promising renewable resource for preparation of sustainable antioxidants and photostabilisers. This particularly applies to Christmas trees used for up to 12 days. After extraction, the biomass can be fully valorised by incorporation in paper packaging.
This volume of the series Springer Briefs in Space Life Sciences explains the physics and biology of radiation in space, defines various forms of cosmic radiation and their dosimetry, and presents a range of exposure scenarios. It also discusses the effects of radiation on human health and describes the molecular mechanisms of heavy charged particles’ deleterious effects in the body. Lastly, it discusses countermeasures and addresses the vital question: Are we ready for launch?
Written for researchers in the space life sciences and space biomedicine, and for master’s students in biology, physics, and medicine, the book will also benefit all non-experts endeavoring to understand and enter space.
Space exposure experiments from the last 15 years have unexpectedly shown that several terrestrial organisms, including some multi-cellular species, are able to survive in open space without protection. The robustness of bdelloid rotifers suggests that these tiny creatures can possibly be added to the still restricted list of animals that can deal with the exposure to harsh condition of space. Bdelloids are one of the smallest animals on Earth. Living all over the world, mostly in semi-terrestrial environments, they appear to be extremely stress tolerant. Their desiccation tolerance at any stage of their life cycle is known to confer tolerance to a variety of stresses including high doses of radiation and freezing. In addition, they constitute a major scandal in evolutionary biology due to the putative absence of sexual reproduction for at least 60 million years. Adineta vaga, with its unique characteristics and a draft genome available, was selected by ESA (European Space Agency) as a model system to study extreme resistance of organisms exposed to space environment. In this manuscript, we documented the resistance of desiccated A. vaga individuals exposed to increasing doses of X-ray, protons and Fe ions. Consequences of exposure to different sources of radiation were investigated in regard to the cellular type including somatic (survival assay) and germinal cells (fertility assay). Then, the capacity of A. vaga individuals to repair DNA DSB induced by different source of radiation was investigated. Bdelloid rotifers represent a promising model in order to investigate damage induced by high or low LET radiation. The possibility of exposure both on hydrated or desiccated specimens may help to decipher contribution of direct and indirect radiation damage on biological processes. Results achieved through this study consolidate our knowledge about the radioresistance of A. vaga and improve our capacity to compare extreme resistance against radiation among living organisms including metazoan.
Discrimination and classification of eight strains related to meat spoilage microorganisms commonly found in poultry meat were successfully carried out using two dispersive Raman spectrometers (Microscope and Portable Fiber-Optic systems) in combination with chemometric methods. Principal Components Analysis (PCA) and Multi-Class Support Vector Machines (MC-SVM) were applied to develop discrimination and classification models. These models were certified using validation data sets which were successfully assigned to the correct bacterial genera and even to the right strain. The discrimination of bacteria down to the strain level was performed for the pre-processed spectral data using a 3-stage model based on PCA. The spectral features and differences among the species on which the discrimination was based were clarified through PCA loadings. In MC-SVM the pre-processed spectral data was subjected to PCA and utilized to build a classification model. When using the first two components, the accuracy of the MC-SVM model was 97.64% and 93.23% for the validation data collected by the Raman Microscope and the Portable Fiber-Optic Raman system, respectively. The accuracy reached 100% for the validation data by using the first eight and ten PC’s from the data collected by Raman Microscope and by Portable Fiber-Optic Raman system, respectively. The results reflect the strong discriminative power and the high performance of the developed models, the suitability of the pre-processing method used in this study and that the low accuracy of the Portable Fiber-Optic Raman system does not adversely affect the discriminative power of the developed models.
Bedingt durch die zunehmende Rohstoffknappheit rückt die Suche nach alternativen, nachhaltigen Rohstoffen immer mehr in den Vordergrund. Im Hinblick auf effiziente chemische Verwertbarkeit bietet Lignin zahlreiche Vorteile für verschiedene Anwendungsbereiche, beispielsweise für biobasierte Polyurethanbeschichtungen, etwa zum Korrosionsschutz. Wesentliche Probleme bei der Verwendung von Lignin ergeben sich durch die Heterogenität dieses Naturstoffes sowie durch dessen geringe Polymerisations-Kompatibilität mit Polyolefinen; beide Faktoren beeinflussen u. a die mechanischen Eigenschaften entsprechender Lignin-basierter Polymere. Zudem hängt die konkrete Struktur und damit auch die physikalisch/chemischen Eigenschaften des Lignins stark von der jeweiligen Rohstoffquelle sowie dem Extraktionsverfahren ab.
Ziel dieser Arbeit war die Strukturaufklärung unmodifizierter und modifizierter Kraft-Lignine (KL) und die Untersuchung der Reaktivität aromatischer wie aliphatischer Hydroxygruppen in Abhängigkeit vom pH-Wert. Hierzu wurden unmodifizierte KL aus Schwarzlauge extrahiert und nachfolgend zunächst einer Soxhlet-Extraktion unterzogen, um in Methyltetrahydrofuran lösliche Lignin-Bestandteile – vornehmlich mit aromatischem Charakter – zu gewinnen und so eine verbesserte Löslichkeit auch im bei der nachfolgenden Polyurethansynthese als Lösemittel verwendeten THF zu gewährleisten. Überdies wurden die extrahierten KL via Demethylierung von Methoxygruppen chemisch modifiziert. Zudem wurde mittels nasschemischer Methoden sowie mit differentieller UV/VIS-Spektroskopie die Anzahl an für die Polymerisation erforderliche Hydroxygruppen quantifiziert. Im Anschluss erfolgte, unter besonderer Berücksichtigung ökologischer und ökonomischer Nachhaltigkeitsaspekte, die Synthese Lignin-basierter und funktionalisierter Polyurethanbeschichtungen. Die Oberflächenfunktionalisierung gestattete die Verbesserung der Oberflächenhomogenität sowie - via blend formation - das Einbetten von TPM-Farbstoffen in die Coatings. Hinsichtlich des Einflusses des bei der Extraktion gewählten pH-Wertes (pH = 2 - 5) auf das Verhalten der so gewonnenen KL wurde eine Veränderung sowohl der Struktur der Lignine als auch deren thermischer Stabilität beobachtet. Zudem wurde nachgewiesen, dass mit steigendem pH-Wert die Funktionalität/Reaktivität der aromatischen wie aliphatischen Hydroxygruppen im Lignin zunimmt. Aus unmodifiziertem KL wurden erfolgreich homogene Lignin-basierte Polyurethan-Coatings (LPU-Coatings) synthetisiert; diese LPU-Coatings zeigten bei Verwendung von bei höheren pH-Werten extrahierten KL homogenere, hydrophobe Oberflächenbeschaffenheit sowie gute thermische Stabilität. Zusätzliche Modifizierung der KL durch Demethylierung führte wegen der gesteigerten Anzahl freier Hydroxygruppen zu moderater Reaktivitätssteigerung und damit zu weiterer Verbesserung der Oberflächeneigenschaften hinsichtlich einer homogenen Oberflächenstruktur und -brillanz. Im Hinblick auf den Aspekt der Nachhaltigkeit wurden durch Syntheseoptimierung - bestehend aus Einstellung der Rohstoff-Korngröße, Ultraschallbehandlung und Verwendung des kommerziellen trifunktionellen Polyetherpolyols Lupranol® 3300 in Kombination mit Desmodur® L75 - die Löslichkeit von Lignin im Polyol sowie die thermische Stabilität der LPU-Coatings erhöht. Im Zuge der Syntheseoptimierungen konnte durch verkürzte Trocknungszeiten Energieeinsparung erzielt werden; zudem ließen sich dabei die eingesetzten Mengen kommerziell erhältlicher Chemikalien verringern; beide Einsparungen führten zu Kostenreduktion. Zugleich ließ sich so nicht nur der KL-Anteil im Polymer-Coating erhöhen: Durch eine optimierte wirtschaftliche Einstufensynthese ließ sich die Umsetzung dieser Vorgehensweise auch im Rahmen industrieller Anwendungen vereinfachen. Das Einbetten ausgewählter TPM-Farbstoffe (Kristallviolett und Brilliantgrün) in die LPU-Coatings durch blend formation führte nachweislich zu antimikrobieller Wirkung der Oberflächenbeschichtung, ohne dass die Oberflächenbeschaffenheit an Homogenität verlor. Die im Rahmen dieser Arbeit synthetisierten LPU-Coatings könnten zukünftig als Korrosionsschutz- und antimikrobielle-Beschichtungen ihre Anwendung finden, z. B. in der Landwirtschaft und im Bausektor.
Die im Rahmen der vorliegenden Arbeit gewonnen Erkenntnisse liefern einen Beitrag zur strukturellen Aufklärung des komplexen Biopolymers Lignin. Darüber hinaus stellen die Untersuchungen und Ergebnisse eine Grundlage für eine nachhaltige Herstellung von Lignin-basierten Polymerbeschichtungen dar, die in Zukunft immer mehr an Bedeutung gewinnen werden.
Unter dem Begriff „Additive Fertigung“ werden alle Verfahren zusammengefasst, die dazu dienen Formteile aufgrund von CAD-Daten schichtweise aufzubauen. Dabei geschieht der Aufbau stets selektiv, entsprechend der durch die CAD-Daten vorgegebenen Positionen. Während für Metalle und Kunststoffe diese Technik bereits in der industriellen Anwendung etabliert ist, befindet sie sich im Bereich der keramischen Werkstoffe noch in einer frühen Entwicklungs- bzw. Anwendungsphase. Um so wichtiger ist es, den aktuellen Stand der Technik und das Potenzial für keramische Bauteile umfassend darzustellen.