Refine
H-BRS Bibliography
- yes (32) (remove)
Departments, institutes and facilities
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (32) (remove)
Document Type
- Conference Object (23)
- Article (6)
- Doctoral Thesis (1)
- Lecture (1)
- Preprint (1)
Year of publication
- 2015 (32) (remove)
Language
- English (32) (remove)
Keywords
- AMBER (1)
- Competition (1)
- Compositional Pattern Producing Networks (1)
- DC electric drives (1)
- Degree of conversion (1)
- Dental resin (1)
- Design Optimization (1)
- Engineering (1)
- FTIR (1)
- Force field (1)
Error analysis in a high accuracy sampled-data velocity stabilising system using Volterra series
(2015)
Polyether and polyether/ester based TPU (thermoplastic polyurethanes) were investigated with wide-angle XRD (X-ray diffraction) and SAXS (small angle X-ray scattering). Furthermore, SAXS measurements were performed in the temperature range of 30 °C to 130 °C. Polyether based polymers exhibit only one broad diffraction signal in a region of 2 θ 15° to 25°. In case of polyurethanes with ether/ester modification, the broad diffraction signal arises with small sharp diffraction signals. SAXS measurements of polymers reveal the size and shape of the crystalline zones of the polymer. Between 30 °C and 130 °C the size of the crystalline zone changes significantly. The size decreases in most of investigated TPU. In the case of Desmopan 9365D an increase of the particle size was observed.
This paper proposes a new artificial neural network-based maximum power point tracker for photovoltaic application. This tracker significantly improves efficiency of the photovoltaic system with series-connection of photovoltaic modules in non-uniform irradiance on photovoltaic array surfaces. The artificial neural network uses irradiance and temperature sensors to generate the maximum power point reference voltage and employ a classical perturb and observe searching algorithm. The structure of the artificial neural network was obtained by numerical modelling using Matlab/Simulink. The artificial neural network was trained using Bayesian regularisation back-propagation algorithms and demonstrated a good prediction of the maximum power point. Relative number of Vmpp prediction errors in range of ±0.2V is 0.05% based on validation data.
In this doctoral thesis the curing process of visible light-curing (VLC) dental composites and 3D printing rapid prototyping (RP) materials are investigated with the focus on dielectric analysis (DEA). This method is able to monitor the curing of resins in an alternating electric fringe field with adjustable frequencies and is often used for cure control of composites manufacturing in the aviation and automotive industry but hardly established in dental science or RP method development. It is capable of investigating very fast initiation and primary curing processes using high frequencies in the kHz-range. The aim of the Thesis is a better understanding of the curing processes with respect to curing parameters such as resin composition, viscosity, temperature, and for light-curing composites also light intensity and irradiation depth. Due to the nature of both dental and RP systems an application of specific experimental set-up had to be designed allowing for the generation of reproducible and valid results. Subsequently, different evaluation methods were developed to characterize the curing behavior of both material types. A special focus was paid to the determination of kinetic parameters from DEA measurements. Reaction rates of the curing of the corresponding thermosets were calculated and applied to the ion viscosity curves measured by DEA to evaluate reaction kinetic parameters. For the dental composites it could be clearly shown that the initial curing rate is directly proportional to light intensity and not to its square root as proposed by many others authors. A good description of the curing behaviour of 3DP RP materials was also achieved assuming a reaction order smaller than one. This data provides the base for the kinetic modeling of polymerization and curing processes proposed within the Thesis.
Work in progress: Starter-project for first semester students to survey their engineering studies
(2015)
Ultra-fast photopolymerization of experimental composites: DEA and FT-NIRS measurement comparison
(2015)
Solar energy is one option to serve the rising global energy demand with low environmental Impact [1]. Building an energy system with a considerable share of solar power requires long-term investment and a careful investigation of potential sites. Therefore, understanding the impacts from varying regionally and locally determined meteorological conditions on solar energy production will influence energy yield projections. Clouds are moving on a short term timescale and have a high influence on the available solar radiation, as they absorb, reflect and scatter parts of the incoming light [2]. However, modeling photovoltaic (PV) power yields with a spectral resolution and local cloud information gives new insights on the atmospheric impact on solar energy.
Solar energy is one option to serve the rising global energy demand with low environmental impact.1 Building an energy system with a considerable share of solar power requires long-term investment and a careful investigation of potential sites. Therefore, understanding the impacts from varying regionally and locally determined meteorological conditions on solar energy production will influence energy yield projections. Clouds are moving on a short term timescale and have a high influence on the available solar radiation, as they absorb, reflect and scatter parts of the incoming light.2 However, the impact of cloudiness on photovoltaic power yields (PV) and cloud induced deviations from average yields might vary depending on the technology, location and time scale under consideration.
Fundamentals of Energy Meteorology - Influence of atmospheric parameters on solar energy production
(2015)
The paper presents a new control strategy of management of transport companies operating in completive transport environment. It is aimed to optimise the headway of transport companies to provide the balance between costs and benefits of operation under competition. The model of transport system build using AnyLogic comprises agent-based and discrete-event techniques. The model combined two transport companies was investigated under condition of the competition between them. It was demonstrated that the control strategy can ensure the balance of interests of transport companies trying to find compromise between cost of operation and quality of service.
With the increasing average age of the population in many developed countries, afflictions like cardiovascular diseases have also increased. Exercising has a proven therapeutic effect on the cardiovascular system and can counteract this development. To avoid overstrain, determining an optimal training dose is crucial. In previous research, heart rate has been shown to be a good measure for cardiovascular behavior. Hence, prediction of the heart rate from work load information is an essential part in models used for training control. Most heart-rate-based models are described in the context of specific scenarios, and have been evaluated on unique datasets only. In this paper, we conduct a joint evaluation of existing approaches to model the cardiovascular system under a certain strain, and compare their predictive performance. For this purpose, we investigated some analytical models as well as some machine learning approaches in two scenarios: prediction over a certain time horizon into the future, and estimation of the relation between work load and heart rate over a whole training session.
The proper use of protective hoods on panel saws should reliably prevent severe injuries from (hand) contact with the blade or material kickbacks. It also should minimize long-term lung damages from fine-particle pollution. To achieve both purposes the hood must be adjusted properly by the operator for each workpiece to fit its height. After a work process is finished, the hood must be lowered down completely to the bench. Unfortunately, in practice the protective hood is fixed at a high position for most of the work time and herein loses its safety features. A system for an automatic height adjustment of the hood would increase comfort and safety. If the system can distinguish between workpieces and skin reliably, it furthermore will reduce occupational hazards for panel saw users. A functional demonstrator of such a system has been designed and implemented to show the feasibility of this approach. A specific optical sensor system is used to observe a point on the extended cut axis in front of the blade. The sensor determines the surface material reliably and measures the distance to the workpiece surface simultaneously. If the distance changes because of a workpiece fed to the machine, the control unit will set the motor-adjusted hood to the correct height. If the sensor detects skin, the hood will not be moved. In addition a camera observes the area under the hood. If there are no workpieces or offcuts left under the hood, it will be lowered back to the default position.
Since being introduced in the sixties and seventies, semi-implicit RosenbrockWanner (ROW) methods have become an important tool for the timeintegration of ODE and DAE problems. Over the years, these methods have been further developed in order to save computational effort by regarding approximations with respect to the given Jacobian [5], reduce effects of order reduction by introducing additional conditions [2, 4] or use advantages of partial explicit integration by considering underlying Runge-Kutta formulations [1]. As a consequence, there is a large number of different ROW-type schemes with characteristic properties for solving various problem formulations given in literature today.