Refine
H-BRS Bibliography
- yes (145) (remove)
Departments, institutes and facilities
- Fachbereich Informatik (77)
- Fachbereich Angewandte Naturwissenschaften (20)
- Fachbereich Ingenieurwissenschaften und Kommunikation (17)
- Fachbereich Wirtschaftswissenschaften (14)
- Institute of Visual Computing (IVC) (14)
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (11)
- Institut für Verbraucherinformatik (IVI) (7)
- Internationales Zentrum für Nachhaltige Entwicklung (IZNE) (6)
- Institut für Sicherheitsforschung (ISF) (5)
- Fachbereich Sozialpolitik und Soziale Sicherung (4)
Document Type
- Report (145) (remove)
Year of publication
Keywords
- Robotik (5)
- Engineering (4)
- Cutting sticks-Problem (3)
- Teilsummenaufteilung (3)
- Virtuelle Realität (3)
- AAL-Technik (2)
- Deep Learning (2)
- Forschungsbericht (2)
- Gravitation (2)
- Interaktion (2)
Neuromorphic computing aims to mimic the computational principles of the brain in silico and has motivated research into event-based vision and spiking neural networks (SNNs). Event cameras (ECs) capture local, independent changes in brightness, and offer superior power consumption, response latencies, and dynamic ranges compared to frame-based cameras. SNNs replicate neuronal dynamics observed in biological neurons and propagate information in sparse sequences of ”spikes”. Apart from biological fidelity, SNNs have demonstrated potential as an alternative to conventional artificial neural networks (ANNs), such as in reducing energy expenditure and inference time in visual classification. Although potentially beneficial for robotics, the novel event-driven and spike-based paradigms remain scarcely explored outside the domain of aerial robots.
To investigate the utility of brain-inspired sensing and data processing in a robotics application, we developed a neuromorphic approach to real-time, online obstacle avoidance on a manipulator with an onboard camera. Our approach adapts high-level trajectory plans with reactive maneuvers by processing emulated event data in a convolutional SNN, decoding neural activations into avoidance motions, and adjusting plans in a dynamic motion primitive formulation. We conducted simulated and real experiments with a Kinova Gen3 arm performing simple reaching tasks involving static and dynamic obstacles. Our implementation was systematically tuned, validated, and tested in sets of distinct task scenarios, and compared to a non-adaptive baseline through formalized quantitative metrics and qualitative criteria.
The neuromorphic implementation facilitated reliable avoidance of imminent collisions in most scenarios, with 84% and 92% median success rates in simulated and real experiments, where the baseline consistently failed. Adapted trajectories were qualitatively similar to baseline trajectories, indicating low impacts on safety, predictability and smoothness criteria. Among notable properties of the SNN were the correlation of processing time with the magnitude of perceived motions (captured in events) and robustness to different event emulation methods. Preliminary tests with a DAVIS346 EC showed similar performance, validating our experimental event emulation method. These results motivate future efforts to incorporate SNN learning, utilize neuromorphic processors, and target other robot tasks to further explore this approach.
An essential measure of autonomy in service robots designed to assist humans is adaptivity to the various contexts of human-oriented tasks. These robots may have to frequently execute the same action, but subject to subtle variations in task parameters that determine optimal behaviour. Such actions are traditionally executed by robots using pre-determined, generic motions, but a better approach could utilize robot arm maneuverability to learn and execute different trajectories that work best in each context.
In this project, we explore a robot skill acquisition procedure that allows incorporating contextual knowledge, adjusting executions according to context, and improvement through experience, as a step towards more adaptive service robots. We propose an apprenticeship learning approach to achieving context-aware action generalisation on the task of robot-to-human object hand-over. The procedure combines learning from demonstration, with which a robot learns to imitate a demonstrator’s execution of the task, and a reinforcement learning strategy, which enables subsequent experiential learning of contextualized policies, guided by information about context that is integrated into the learning process. By extending the initial, static hand-over policy to a contextually adaptive one, the robot derives and executes variants of the demonstrated action that most appropriately suit the current context. We use dynamic movement primitives (DMPs) as compact motion representations, and a model-based Contextual Relative Entropy Policy Search (C-REPS) algorithm for learning policies that can specify hand-over position, trajectory shape, and execution speed, conditioned on context variables. Policies are learned using simulated task executions, before transferring them to the robot and evaluating emergent behaviours.
We demonstrate the algorithm’s ability to learn context-dependent hand-over positions, and new trajectories, guided by suitable reward functions, and show that the current DMP implementation limits learning context-dependent execution speeds. We additionally conduct a user study involving participants assuming different postures and receiving an object from the robot, which executes hand-overs by either exclusively imitating a demonstrated motion, or selecting hand-over positions based on learned contextual policies and adapting its motion accordingly. The results confirm the hypothesized improvements in the robot’s perceived behaviour when it is context-aware and adaptive, and provide useful insights that can inform future developments.
A robot (e.g. mobile manipulator) that interacts with its environment to perform its tasks, often faces situations in which it is unable to achieve its goals despite perfect functioning of its sensors and actuators. These situations occur when the behavior of the object(s) manipulated by the robot deviates from its expected course because of unforeseeable ircumstances. These deviations are experienced by the robot as unknown external faults. In this work we present an approach that increases reliability of mobile manipulators against the unknown external faults. This approach focuses on the actions of manipulators which involve releasing of an object. The proposed approach, which is triggered after detection of a fault, is formulated as a three-step scheme that takes a definition of a planning operator and an example simulation as its inputs. The planning operator corresponds to the action that fails because of the fault occurrence, whereas the example simulation shows the desired/expected behavior of the objects for the same action. In its first step, the scheme finds a description of the expected behavior of the objects in terms of logical atoms (i.e. description vocabulary). The description of the simulation is used by the second step to find limits of the parameters of the manipulated object. These parameters are the variables that define the releasing state of the object.
Using randomly chosen values of the parameters within these limits, this step creates different examples of the releasing state of the object. Each one of these examples is labelled as desired or undesired according to the behavior exhibited by the object (in the simulation), when the object is released in the state corresponded by the example. The description vocabulary is also used in labeling the examples autonomously. In the third step, an algorithm (i.e. N-Bins) uses the labelled examples to suggest the state for the object in which releasing it avoids the occurrence of unknown external faults.
The proposed N-Bins algorithm can also be used for binary classification problems. Therefore, in our experiments with the proposed approach we also test its prediction ability along with the analysis of the results of our approach. The results show that under the circumstances peculiar to our approach, N-Bins algorithm shows reasonable prediction accuracy where other state of the art classification algorithms fail to do so. Thus, N-Bins also extends the ability of a robot to predict the behavior of the object to avoid unknown external faults. In this work we use simulation environment OPENRave that uses physics engine ODE to simulate the dynamics of rigid bodies.
A system that interacts with its environment can be much more robust if it is able to reason about the faults that occur in its environment, despite perfect functioning of its internal components. For robots, which interact with the same environment as human beings, this robustness can be obtained by incorporating human-like reasoning abilities in them. In this work we use naive physics to enable reasoning about external faults in robots. We propose an approach for diagnosing external faults that uses qualitative reasoning on naive physics concepts for diagnosis. These concepts are mainly individual properties of objects that define their state qualitatively. The reasoning process uses physical laws to generate possible states of the concerned object(s), which could result into a detected external fault. Since effective reasoning about any external fault requires the information of relevant properties and physical laws, we associate different properties and laws to different types of faults which can be detected by a robot. The underlying ontology of this association is proposed on the basis of studies conducted (by other researchers) on reasoning of physics novices about everyday physical phenomena. We also formalize some definitions of properties of objects into a small framework represented in First-Order logic. These definitions represent naive concepts behind the properties and are intended to be independent from objects and circumstances. The definitions in the framework illustrates our proposal of using different biased definitions of properties for different types of faults. In this work, we also present a brief review of important contributions in the area of naive/qualitative physics. These reviews help in understanding the limitations of naive/qualitative physics in general. We also apply our approach to simple scenarios to asses its limitations in particular. Since this work was done independent of any particular real robotic system, it can be seen as a theoretical proof of the concept of usefulness of naive physics for external fault reasoning in robotics.
A principal step towards solving diverse perception problems is segmentation. Many algorithms benefit from initially partitioning input point clouds into objects and their parts. In accordance with cognitive sciences, segmentation goal may be formulated as to split point clouds into locally smooth convex areas, enclosed by sharp concave boundaries. This goal is based on purely geometrical considerations and does not incorporate any constraints, or semantics, of the scene and objects being segmented, which makes it very general and widely applicable. In this work we perform geometrical segmentation of point cloud data according to the stated goal. The data is mapped onto a graph and the task of graph partitioning is considered. We formulate an objective function and derive a discrete optimization problem based on it. Finding the globally optimal solution is an NP-complete problem; in order to circumvent this, spectral methods are applied. Two algorithms that implement the divisive hierarchical clustering scheme are proposed. They derive graph partition by analyzing the eigenvectors obtained through spectral relaxation. The specifics of our application domain are used to automatically introduce cannot-link constraints in the clustering problem. The algorithms function in completely unsupervised manner and make no assumptions about shapes of objects and structures that they segment. Three publicly available datasets with cluttered real-world scenes and an abundance of box-like, cylindrical, and free-form objects are used to demonstrate convincing performance. Preliminary results of this thesis have been contributed to the International Conference on Autonomous Intelligent Systems (IAS-13).
Recent work in image captioning and scene-segmentation has shown significant results in the context of scene-understanding. However, most of these developments have not been extrapolated to research areas such as robotics. In this work we review the current state-ofthe- art models, datasets and metrics in image captioning and scenesegmentation. We introduce an anomaly detection dataset for the purpose of robotic applications, and we present a deep learning architecture that describes and classifies anomalous situations. We report a METEOR score of 16.2 and a classification accuracy of 97 %.
AErOmAt Abschlussbericht
(2020)
Das Projekt AErOmAt hatte zum Ziel, neue Methoden zu entwickeln, um einen erheblichen Teil aerodynamischer Simulationen bei rechenaufwändigen Optimierungsdomänen einzusparen. Die Hochschule Bonn-Rhein-Sieg (H-BRS) hat auf diesem Weg einen gesellschaftlich relevanten und gleichzeitig wirtschaftlich verwertbaren Beitrag zur Energieeffizienzforschung geleistet. Das Projekt führte außerdem zu einer schnelleren Integration der neuberufenen Antragsteller in die vorhandenen Forschungsstrukturen.
XPERSIF: a software integration framework & architecture for robotic learning by experimentation
(2008)
The integration of independently-developed applications into an efficient system, particularly in a distributed setting, is the core issue addressed in this work. Cooperation between researchers across various field boundaries in order to solve complex problems has become commonplace. Due to the multidisciplinary nature of such efforts, individual applications are developed independent of the integration process. The integration of individual applications into a fully-functioning architecture is a complex and multifaceted task. This thesis extends a component-based architecture, previously developed by the authors, to allow the integration of various software applications which are deployed in a distributed setting. The test bed for the framework is the EU project XPERO, the goal of which is robot learning by experimentation. The task at hand is the integration of the required applications, such as planning of experiments, perception of parametrized features, robot motion control and knowledge-based learning, into a coherent cognitive architecture. This allows a mobile robot to use the methods involved in experimentation in order to learn about its environment. To meet the challenge of developing this architecture within a distributed, heterogeneous environment, the authors specified, defined, developed, implemented and tested a component-based architecture called XPERSIF. The architecture comprises loosely-coupled, autonomous components that offer services through their well-defined interfaces and form a service-oriented architecture. The Ice middleware is used in the communication layer. Its deployment facilitates the necessary refactoring of concepts. One fully specified and detailed use case is the successful integration of the XPERSim simulator which constitutes one of the kernel components of XPERO.The results of this work demonstrate that the proposed architecture is robust and flexible, and can be successfully scaled to allow the complete integration of the necessary applications, thus enabling robot learning by experimentation. The design supports composability, thus allowing components to be grouped together in order to provide an aggregate service. Distributed simulation enabled real time tele-observation of the simulated experiment. Results show that incorporating the XPERSim simulator has substantially enhanced the speed of research and the information flow within the cognitive learning loop.
Recent advances in Natural Language Processing have substantially improved contextualized representations of language. However, the inclusion of factual knowledge, particularly in the biomedical domain, remains challenging. Hence, many Language Models (LMs) are extended by Knowledge Graphs (KGs), but most approaches require entity linking (i.e., explicit alignment between text and KG entities). Inspired by single-stream multimodal Transformers operating on text, image and video data, this thesis proposes the Sophisticated Transformer trained on biomedical text and Knowledge Graphs (STonKGs). STonKGs incorporates a novel multimodal architecture based on a cross encoder that uses the attention mechanism on a concatenation of input sequences derived from text and KG triples, respectively. Over 13 million so-called text-triple pairs, coming from PubMed and assembled using the Integrated Network and Dynamical Reasoning Assembler (INDRA), were used in an unsupervised pre-training procedure to learn representations of biomedical knowledge in STonKGs. By comparing STonKGs to an NLP- and a KG-baseline (operating on either text or KG data) on a benchmark consisting of eight fine-tuning tasks, the proposed knowledge integration method applied in STonKGs was empirically validated. Specifically, on tasks with a comparatively small dataset size and a larger number of classes, STonKGs resulted in considerable performance gains, beating the F1-score of the best baseline by up to 0.083. Both the source code as well as the code used to implement STonKGs are made publicly available so that the proposed method of this thesis can be extended to many other biomedical applications.
Abschlussbericht zum BMBF-Fördervorhaben Enabling Infrastructure for HPC-Applications (EI-HPC)
(2020)
This thesis work presents the implementation and validation of image processing problems in hardware to estimate the performance and precision gain. It compares the implementation for the addressed problem on a Field Programmable Gate Array (FPGA) with a software implementation for a General Purpose Processor (GPP) architecture. For both solutions the implementation costs for their development is an important aspect in the validation. The analysis of the flexibility and extendability that can be achieved by a modular implementation for the FPGA design was another major aspect. This work is based upon approaches from previous work, which included the detection of Binary Large OBjects (BLOBs) in static images and continuous video streams [13, 15]. One addressed problem of this work is the tracking of the detected BLOBs in continuous image material. This has been implemented for the FPGA platform and the GPP architecture. Both approaches have been compared with respect to performance and precision. This research project is motivated by the MI6 project of the Computer Vision research group, which is located at the Bonn-Rhein-Sieg University of Applied Sciences. The intent of the MI6 project is the tracking of a user in an immersive environment. The proposed solution is to attach a light emitting device to the user for tracking the created light dots on the projection surface of the immersive environment. Having the center points of those light dots would allow the estimation of the user’s position and orientation. One major issue that makes Computer Vision problems computationally expensive is the high amount of data that has to be processed in real-time. Therefore, one major target for the implementation was to get a processing speed of more than 30 frames per second. This would allow the system to realize feedback to the user in a response time which is faster than the human visual perception. One problem that comes with the idea of using a light emitting device to represent the user, is the precision error. Dependent on the resolution of the tracked projection surface of the immersive environment, a pixel might have a size in cm2. Having a precision error of only a few pixels, might lead to an offset in the estimated user’s position of several cm. In this research work the development and validation of a detection and tracking system for BLOBs on a Cyclone II FPGA from Altera has been realized. The system supports different input devices for the image acquisition and can perform detection and tracking for five to eight BLOBs. A further extension of the design has been evaluated and is possible with some constraints. Additional modules for compressing the image data based on run-length encoding and sub-pixel precision for the computed BLOB center-points have been designed. For the comparison of the FPGA approach for BLOB tracking a similar implementation in software using a multi-threaded approach has been realized. The system can transmit the detection or tracking results on two available communication interfaces, USB and RS232. The analysis of the hardware solution showed a similar precision for the BLOB detection and tracking as the software approach. One problem is the strong increase of the allocated resources when extending the system to process more BLOBs. With one of the applied target platforms, the DE2-70 board from Altera, the BLOB detection could be extended to process up to thirty BLOBs. The implementation of the tracking approach in hardware required much more effort than the software solution. The design of high level problems in hardware for this case are more expensive than the software implementation. The search and match steps in the tracking approach could be realized more efficiently and reliably in software. The additional pre-processing modules for sub-pixel precision and run-length-encoding helped to increase the system’s performance and precision.
This report presents the implementation and evaluation of a computer vision problem on a Field Programmable Gate Array (FPGA). This work is based upon [5] where the feasibility of application specific image processing algorithms on a FPGA platform have been evaluated by experimental approaches. The results and conclusions of that previous work builds the starting point for the work, described in this report. The project results show considerable improvement of previous implementations in processing performance and precision. Different algorithms for detecting Binary Large OBjects (BLOBs) more precisely have been implemented. In addition, the set of input devices for acquiring image data has been extended by a Charge-Coupled Device (CCD) camera. The main goal of the designed system is to detect BLOBs in continuous video image material and compute their center points.
This work belongs to the MI6 project from the Computer Vision research group of the University of Applied Sciences Bonn-Rhein-Sieg1 . The intent is the invention of a passive tracking device for an immersive environment to improve user interaction and system usability. Therefore the detection of the users position and orientation in relation to the projection surface is required. For a reliable estimation a robust and fast computation of the BLOB's center-points is necessary. This project has covered the development of a BLOB detection system on an Altera DE2 Development and Education Board with a Cyclone II FPGA. It detects binary spatially extended objects in image material and computes their center points. Two different sources have been applied to provide image material for the processing. First, an analog composite video input, which can be attached to any compatible video device. Second, a five megapixel CCD camera, which is attached to the DE2 board. The results are transmitted on the serial interface of the DE2 board to a PC for validation of their ground truth and further processing. The evaluation compares precision and performance gain dependent on the applied computation methods and the input device, which is providing the image material.
This report presents the implementation and evaluation of a computer vision task on a Field Programmable Gate Array (FPGA). As an experimental approach for an application-specific image-processing problem it provides reliable results to measure gained performance and precision compared with similar solutions on General Purpose Processor (GPP) architectures.
The project addresses the problem of detecting Binary Large OBjects (BLOBs) in a continuous video stream. For this problem a number of different solutions exist. But most of these are realized on GPP platforms, where resolution and processing speed define the performance barrier. With the opportunity of parallelization and performance abilities like in hardware, the application of FPGAs become interesting. This work belongs to the MI6 project from the Computer Vision research group of the University of Applied Sciences Bonn-Rhein-Sieg. It address the detection of the users position and orientation in relation to the virtual environment in an Immersion Square.
The goal is to develop a light emitting device, that points from the user towards the point of interest on the projection screen. The projected light dots are used to represent the user in the virtual environment. By detecting the light dots with video cameras, the idea is to interface the position and orientation of the relative position of the user interface. Fort that the laser dots need to be arranged in a unique pattern, which requires at least five points.[29] For a reliable estimation a robust computation of the BLOB's center-points is necessary.
This project has covered the development of a BLOB detection system on a FPGA platform. It detects binary spatially extended objects in a continuous video stream and computes their center points. The results are displayed to the user and where validated for their ground truth. The evaluation compares precision and performance gain against similar approaches on GPP platforms.
Im Rahmen der Förderlinie „FDMScouts.nrw“ arbeiten zehn Hochschulen kooperativ an Strukturen und Prozessen für einen nachhaltigen Aufbau des Forschungsdatenmanagements an den betreffenden Hochschulen für angewandte Wissenschaften und Fachhochschulen.
Hierbei ist ausschlaggebend, das Forschungsdatenmanagement zielgerichtet und bedarfsorientiert zu konzipieren und sowohl strategisch als auch operativ zu verankern. Ausgangspunkt dieser Bemühungen bildet daher eine Bedarfserhebung, die bestehende Datenworkflows, Vorwissen und Bedarfe der Forschenden zum FDM erfassen soll. In Abstimmung innerhalb der Förderlinie „FDMScouts.nrw“ wurde der vorliegende Umfragebogen erstellt.
Der Erhebungsbogen basiert auf der Vorlage „Fragenkatalog zur Bedarfserhebung zur Archivierung und Bereitstellung von Forschungsdaten an den rheinland-pfälzischen Universitäten und Hochschulen für angewandte Wissenschaften“ (Lemaire et al. 2022). Darüber hinaus wurden Aspekte aus „UNEKE: Forschungsdatenspeicherung - Praxis und Bedarfe: Online-Survey 2019“ (Brenger et al. 2019) und aus „Anforderungserhebung bei den brandenburgischen Hochschulen“ (Radtke et al. 2020) entnommen. Als weitere Quelle diente der „Interviewleitfaden zur Bestands- und Bedarfserhebung im Forschungsdatenmanagement (FDM) - Projekt FDM-TUDO“ der TU Dortmund (Kletke et al. 2022).
Business process infrastructures like BPMS (Business Process Management Systems) and WfMS (Workflow Management Systems) traditionally focus on the automation of processes predefined at design time. This approach is well suited for routine tasks which are processed repeatedly and which are described by a predefined control flow. In contrast, knowledge-intensive work is more goal and data-driven and less control-flow oriented. Knowledge workers need the flexibility to decide dynamically at run-time and based on current context information on the best next process step to achieve a given goal. Obviously, in most practical scenarios, these decisions are complex and cannot be anticipated and modeled completely in a predefined process model. Therefore, adaptive and dynamic process management techniques are necessary to augment the control-flow oriented part of process management (which is still a need also for knowledge workers) with flexible, context-dependent, goaloriented support.
Studienverläufe von Studenten weichen nicht selten vom offiziell geplanten Curriculum ab. Für eine den Studienerfolg verbessernde Planung und Weiterentwicklung von Studiengängen und Curricula fehlen den Verantwortlichen häufig Erkenntnisse über tatsächliche sowie typischerweise erfolgreiche und weniger erfolgreiche Studienverlaufsmuster. Process-Mining-Techniken können helfen, mehr Transparenz bei der Auswertung von Studienverläufen zu schaffen und so die Erkennung typischer Studienverlaufsmuster, die Überprüfung der Übereinstimmung der konkreten Studienverläufe mit dem vorgegebenen Curriculum sowie eine zielgerechte Verbesserung des Curriculums zu unterstützen.
Das Cutting sticks-Problem ist in seiner allgemeinen Formulierung ein NP-vollständiges Problem mit Anwendungspotenzialen im Bereich der Logistik. Unter der Annahme, dass P ungleich NP (P != NP) ist, existieren keine effizienten, d.h. polynomiellen Algorithmen zur Lösung des allgemeinen Problems.
In diesem Papier werden Ansätze aufgezeigt, mit denen bestimmte Instanzen des Problems effizient berechnet werden können. Für die Berechnung wichtige Parameter werden charakterisiert und deren Beziehung untereinander analysiert.
Das Cutting sticks-Problem ist ein NP-vollständiges Problem mit Anwendungspotenzialen im Bereich der Logistik. Es werden grundlegende Definitionen für die Behandlung sowie bisherige Ansätze zur Lösung des Problems aufgearbeitet und durch einige neue Aussagen ergänzt. Insbesondere stehen Ideen für eine algorithmische Lösung des Problems bzw. von Varianten des Problems im Fokus.
Das Cutting sticks-Problem ist in seiner allgemeinen Formulierung ein NP-vollständiges Problem mit Anwendungspotenzialen im Bereich der Logistik. Unter der Annahme, dass P ungleich NP (P != NP) ist, existieren keine effizienten, d.h. polynomiellen Algorithmen zur Lösung des allgemeinen Problems.
In diesem Papier werden für eine Reihe von Instanzen effiziente Lösungen angegeben.
Designing consumption feedback to support sustainable behavior is an active research topic. In recent years, relevant work has suggested a variety of possible design strategies. Addressing the more recent developments in this field, this paper presents a structured literature review, providing an overview of current information design approaches and highlighting open research questions. We suggest a literature-based taxonomy of used strategies, data source and output media with a special focus on design. In particular, we analyze which visual forms are used in current research to reach the identified strategy goals. Our survey reveals that the trend is towards more complex and contextualized feedback and almost every design within sustainable HCI adopts common visualization forms. Furthermore, adopting more advanced visual forms and techniques from information visualization research is helpful when dealing with ever-increasing data sources at home. Yet so far, this combination has often been neglected in feedback design.
Having multiple talkers on a bus system rises the bandwidth on this bus. To monitor the communication on a bus, tools that constantly read the bus are needed. This report shows an implementation of a monitoring system for the CAN bus utilizing the Altera DE2 development board. The Biomedical Institute of the University of New Brunswick is currently developing together with different partners a prosthetic limb device, the UNB hand. Communication in this device is done via two CAN buses, which operate at a bit-rate of 1 Mbit/s. The developed monitoring system has been completely designed in Verilog HDL. It monitors the CAN bus in real-time and allows monitoring of different modules as well as of the overall load. The calculated data is displayed on the built-in LCD and also transmitted via UART to a PC. A sample receiver programmed in C is also given. The evaluation of this system has been done by using the Microchip CAN Bus Analyzer Tool connected to the GPIO port of the development board that simulates CAN communication.
BonaRes (Modul A): Überwindung der Bodenmüdigkeit mithilfe eines integrierten Ansatzes - ORDIAmur
(2019)
Multi-robot systems (MRS) are capable of performing a set of tasks by dividing them among the robots in the fleet. One of the challenges of working with multirobot systems is deciding which robot should execute each task. Multi-robot task allocation (MRTA) algorithms address this problem by explicitly assigning tasks to robots with the goal of maximizing the overall performance of the system. The indoor transportation of goods is a practical application of multi-robot systems in the area of logistics. The ROPOD project works on developing multi-robot system solutions for logistics in hospital facilities. The correct selection of an MRTA algorithm is crucial for enhancing transportation tasks. Several multi-robot task allocation algorithms exist in the literature, but just few experimental comparative analysis have been performed. This project analyzes and assesses the performance of MRTA algorithms for allocating supply cart transportation tasks to a fleet of robots. We conducted a qualitative analysis of MRTA algorithms, selected the most suitable ones based on the ROPOD requirements, implemented four of them (MURDOCH, SSI, TeSSI, and TeSSIduo), and evaluated the quality of their allocations using a common experimental setup and 10 experiments. Our experiments include off-line and semi on-line allocation of tasks as well as scalability tests and use virtual robots implemented as Docker containers. This design should facilitate deployment of the system on the physical robots. Our experiments conclude that TeSSI and TeSSIduo suit best the ROPOD requirements. Both use temporal constraints to build task schedules and run in polynomial time, which allow them to scale well with the number of tasks and robots. TeSSI distributes the tasks among more robots in the fleet, while TeSSIduo tends to use a lower percentage of the available robots.
Subsequently, we have integrated TeSSI and TeSSIduo to perform multi-robot task allocation for the ROPOD project.
Die Wahrnehmung des perzeptionellen Aufrecht (perceptual upright, PU) variiert in Abhängigkeit der Gewichtung verschiedener gravitationsbezogener und körperbasierter Merkmale zwischen Kontexten und aufgrund individueller Unterschiede. Ziel des Vorhabens war es, systematisch zu untersuchen, welche Zusammenhänge zwischen visuellen und gravitationsbedingten Merkmalen bestehen. Das Vorhaben baute auf vorangegangen Untersuchungen auf, deren Ergebnisse indizieren, dass eine Gravitation von ca. 0,15g notwendig ist, um effiziente Selbstorientierungsinformationen bereit zu stellen (Herpers et. al, 2015; Harris et. al, 2014).
In dem hier beschriebenen Vorhaben wurden nun gezielt künstliche Gravitationsbedingungen berücksichtigt, um die Gravitationsschwelle, ab der ein wahrnehmbarer Einfluss beobachtbar ist, genauer zu quantifizieren bzw. die oben genannte Hypothese zu bestätigen. Es konnte gezeigt werden, dass die zentripetale Kraft, die auf einer rotierenden Zentrifuge entlang der Längsachse des Körpers wirkt, genauso efektiv wie Stehen mit normaler Schwerkraft ist, um das Gefühl des perzeptionellen Aufrechts auszulösen. Die erzielten Daten deuten zudem darauf hin, dass ein Gravitationsfeld von mindestens 0,15 g notwendig ist, um eine efektive Orientierungsinformation für die Wahrnehmung von Aufrecht zu liefern. Dies entspricht in etwa der Gravitationskraft von 0,17 g, die auf dem Mond besteht. Für eine lineare Beschleunigung des Körpers liegt der vestibulare Schwellenwert bei etwa 0,1 m/s2 und somit liegt der Wert für die Situation auf dem Mond von 1,6 m/s2 deutlich über diesem Schwellenwert.
Data management is a challenge in both scientific and technical environments. Therefore researchers have developed a special interest in this field. Modern approaches (i.e. Subversion, CVS) already offer authoring and versioning in distributed systems. However this might be insufficient in a vast number of scenarios, where not only the data resulting from a process, but also data which describes the process that generated those results is crucial.
Künstliche Intelligenz (KI) ist aus der heutigen Gesellschaft kaum noch wegzudenken. Auch im Sport haben Methoden der KI in den letzten Jahren mehr und mehr Einzug gehalten. Ob und inwieweit dabei allerdings die derzeitigen Potenziale der KI tatsächlich ausgeschöpft werden, ist bislang nicht untersucht worden. Der Nutzen von Methoden der KI im Sport ist unbestritten, jedoch treten bei der Umsetzung in die Praxis gravierende Probleme auf, was den Zugang zu Ressourcen, die Verfügbarkeit von Experten und den Umgang mit den Methoden und Daten betrifft. Die Ursache für die, verglichen mit anderen Anwendungsgebieten, langsame An- bzw. Übernahme von Methoden der KI in den Spitzensport ist nach Hypothese des Autorenteams auf mehrere Mismatches zwischen dem Anwendungsfeld und den KI-Methoden zurückzuführen. Diese Mismatches sind methodischer, struktureller und auch kommunikativer Art. In der vorliegenden Expertise werden Vorschläge abgeleitet, die zur Auflösung der Mismatches führen können und zugleich neue Transfer- und Synergiemöglichkeiten aufzeigen. Außerdem wurden drei Use Cases zu Trainingssteuerung, Leistungsdiagnostik und Wettkampfdiagnostik exemplarisch umgesetzt. Dies erfolgte in Form entsprechender Projektbeschreibungen. Dabei zeigt die Ausarbeitung, auf welche Art und Weise Probleme, die heute noch bei der Verbindung zwischen KI und Sport bestehen, möglichst ausgeräumt werden können. Eine empirische Umsetzung des Use Case Trainingssteuerung erfolgte im Radsport, weshalb dieser ausführlicher dargestellt wird.
Aufgrund eines nahezu gleichlautenden Beschlusses des Kreistages im Rhein-Sieg-Kreis (RSK) und des Hauptausschusses der Stadt Bonn im Jahr 2011 wurden die jeweiligen Verwaltungen beauftragt, gemeinsam mit den Energieversorgern der Region ein Starthilfekonzept Elektromobilität zu entwickeln. In Folge dieses Beschlusses konstituierte sich Ende 2011 ein Arbeitskreis, der aus den Verwaltungen des Rhein-Sieg-Kreises und der Stadt Bonn, den Energieversorgern SWB Energie und Wasser, der Rhenag, den Stadtwerken Troisdorf, der Rheinenergie und den RWE besteht. Die inhaltlichen Schwerpunkte, die inzwischen in drei Arbeitskreisen behandelt werden, umfassen den Ausbau der Ladeinfrastruktur, die Öffentlichkeitsarbeit und die Bereitstellung von Strom aus regenerativen Quellen durch den Zubau entsprechender Anlagen in der Region. Während Maßnahmen zur Öffentlichkeitsarbeit und die Bereitstellung Grünen Stroms aus den Arbeitskreisen direkt bearbeitet und bewegt werden, ist dies aufgrund der Komplexität des Themas und der zahlreichen Einflussgrößen beim Ausbau der Ladeinfrastruktur nicht möglich. Daraus entstand die Überlegung einer Kooperation mit der Hochschule Bonn-Rhein-Sieg.
Kollaborative Industrieroboter werden für produzierende Unternehmen immer kosteneffizienter. Während diese Systeme für den menschlichen Mitarbeiter eine große Hilfe sein können, stellen sie gleichzeitig ein ernstes Gesundheitsrisiko dar, wenn die zwingend notwendigen Sicherheitsmaßnahmen nur unzureichend umgesetzt werden. Herkömmliche Sicherheitseinrichtungen wie Zäune oder Lichtvorhänge bieten einen guten Schutz, aber solch statische Schutzvorrichtungen sind in neuen, hochdynamischen Arbeitsszenarien problematisch.
Im Forschungsprojekt BeyondSPAI wurde ein Funktionsmuster eines Multisensorsystems zur Absicherung solcher dynamischer Arbeitsszenarien entworfen, implementiert und im Feld getestet. Kern des Systems ist eine robuste optische Materialklassifikation, die mit Hilfe eines intelligenten InGaAs-Kamerasystems Haut von anderen typischen Werkstückoberflächen (z.B. Holz, Metalle od. Kunststoffe) unterscheiden kann. Diese einzigartige Eigenschaft wird genutzt, um menschliche Mitarbeiter zuverlässig zu erkennen, so dass ein konventioneller Roboter in Folge als personenbewusster Cobot arbeiten kann.
Das System ist modular und kann leicht mit weiteren Sensoren verschiedenster Art erweitert werden. Es kann an verschiedene Marken von Industrierobotern angepasst werden und lässt sich schnell an bestehenden Robotersystemen integrieren. Die vier vom System bereitgestellten Sicherheitsausgänge können dazu verwendet werden - abhängig von der durchdrungenen Überwachungszone - entweder eine Warnung auszugeben, die Bewegung des Roboters auf eine sichere Geschwindigkeit zu verlangsamen, oder den Roboter sicher anzuhalten. Sobald alle Zonen wieder als „eindeutig frei von Personen“ identifiziert sind, kann der Roboter wieder beschleunigen, seine ursprüngliche Bewegung wiederaufnehmen und die Arbeit fortsetzen.
Emotional communication is a key element of habilitation care of persons with dementia. It is, therefore, highly preferable for assistive robots that are used to supplement human care provided to persons with dementia, to possess the ability to recognize and respond to emotions expressed by those who are being cared-for. Facial expressions are one of the key modalities through which emotions are conveyed. This work focuses on computer vision-based recognition of facial expressions of emotions conveyed by the elderly.
Although there has been much work on automatic facial expression recognition, the algorithms have been experimentally validated primarily on young faces. The facial expressions on older faces has been totally excluded. This is due to the fact that the facial expression databases that were available and that have been used in facial expression recognition research so far do not contain images of facial expressions of people above the age of 65 years. To overcome this problem, we adopt a recently published database, namely, the FACES database, which was developed to address exactly the same problem in the area of human behavioural research. The FACES database contains 2052 images of six different facial expressions, with almost identical and systematic representation of the young, middle-aged and older age-groups.
In this work, we evaluate and compare the performance of two of the existing imagebased approaches for facial expression recognition, over a broad spectrum of age ranging from 19 to 80 years. The evaluated systems use Gabor filters and uniform local binary patterns (LBP) for feature extraction, and AdaBoost.MH with multi-threshold stump learner for expression classification. We have experimentally validated the hypotheses that facial expression recognition systems trained only on young faces perform poorly on middle-aged and older faces, and that such systems confuse ageing-related facial features on neutral faces with other expressions of emotions. We also identified that, among the three age-groups, the middle-aged group provides the best generalization performance across the entire age spectrum. The performance of the systems was also compared to the performance of humans in recognizing facial expressions of emotions. Some similarities were observed, such as, difficulty in recognizing the expressions on older faces, and difficulty in recognizing the expression of sadness.
The findings of our work establish the need for developing approaches for facial expression recognition that are robust to the effects of ageing on the face. The scientific results of our work can be used as a basis to guide future research in this direction.
Population ageing and growing prevalence of disability have resulted in a growing need for personal care and assistance. The insufficient supply of personal care workers and the rising costs of long-term care have turned this phenomenon into a greater social concern. This has resulted in a growing interest in assistive technology in general, and assistive robots in particular, as a means of substituting or supplementing the care provided by humans, and as a means of increasing the independence and overall quality of life of persons with special needs. Although many assistive robots have been developed in research labs world-wide, very few are commercially available. One of the reasons for this, is the cost. One way of optimising cost is to develop solutions that address specific needs of users. As a precursor to this, it is important to identify gaps between what the users need and what the technology (assistive robots) currently provides. This information is obtained through technology mapping.
The current literature lacks a mapping between user needs and assistive robots, at the level of individual systems. The user needs are not expressed in uniform terminology across studies, which makes comparison of results difficult. In this research work, we have illustrated the technology mapping of assistive robots using the International Classification of Functioning, Disability and Health (ICF). ICF provides standard terminology for expressing user needs in detail. Expressing the assistive functions of robots also in ICF terminology facilitates communication between different stakeholders (rehabilitation professionals, robotics researchers, etc.).
We also investigated existing taxonomies for assistive robots. It was observed that there is no widely accepted taxonomy for classifying assistive robots. However, there exists an international standard, ISO 9999, which classifies commercially available assistive products. The applicability of the latest revision of ISO 9999 standard for classifying mobility assistance robots has been studied. A partial classification of assistive robots based on ISO 9999 is suggested. The taxonomy and technology mapping are illustrated with the help of four robots that have the potential to provide mobility assistance. These are the SmartCane, the SmartWalker, MAid and Care-O-bot (R) 3. SmartCane, SmartWalker and MAid provide assistance by supporting physical movement. Care-O-bot (R) 3 provides assistance by reducing the need to move.
Als Basis für Simulationen innerhalb virtueller Umgebungen werden meist unterliegende Semantiken benötigt. Im Fall von Verkehrssimulationen werden in der Regel definierte Verkehrsnetzwerke genutzt. Die Erstellung dieser Netzwerke wird meist per Hand durchgeführt, wodurch sie fehleranfällig ist und viel Zeit erfordert. Dieses Projekt wurde im Rahmen des AVeSi Projektes durchgeführt, in dem an der Entwicklung einer realistischen Verkehrssimulation für virtuelle Umgebung geforscht wird. Der im Projekt angestrebte Simulationsansatz basiert auf der Nutzung von zwei Komplexitätsebenen – einer mikroskopischen und einer mesoskopischen. Um einen Übergang zwischen den Simulationsebenen zu realisieren ist eine Verknüpfung der Verkehrsnetzwerke notwendig, was ebenfalls mit einem hohen Zeitaufwand verbunden ist. In diesem Bericht werden Modelle für Verkehrsnetzwerke beider Ebenen vorgestellt. Anschließend wird ein Ansatz beschrieben, der eine automatische Generierung und Verknüpfung von Verkehrsnetzwerken beider Modelle ermöglicht. Als Grundlage für die Generierung der Netzwerke dienen Daten im OpenDRIVE®-Format. Zur Evaluierung wurden wirklichkeitsgetreue OpenStreetMap-Daten, durch Verwendung einer Drittanbietersoftware, in OpenDRIVE®-Datensätze überführt. Es konnte nachgewiesen werden, dass es durch den Ansatz möglich ist, innerhalb weniger Minuten, große Verkehrsnetzwerke zu erzeugen, auf denen unmittelbar Simulationen ausgeführt werden können. Die Qualität der zur Evaluierung generierten Netzwerke reicht jedoch für Umgebungen, in denen ein hoher Realitätsgrad gefordert wird, nicht aus, was einen zusätzlichen Bearbeitungsschritt notwendig macht. Die Qualitätsprobleme konnten darauf zurückgeführt werden, dass der Detailgrad, der den Evaluierungsdaten zu Grunde liegenden OpenStreetMap-Daten, nicht hoch genug und der Überführungsprozess nicht ausreichend transparent ist.
The ability of detecting people has become a crucial subtask, especially in robotic systems which aim an application in public or domestic environments. Robots already provide their services e.g. in real home improvement markets and guide people to a desired product. In such a scenario many robot internal tasks would benefit from the knowledge of knowing the number and positions of people in the vicinity. The navigation for example could treat them as dynamical moving objects and also predict their next motion directions in order to compute a much safer path. Or the robot could specifically approach customers and offer its services. This requires to detect a person or even a group of people in a reasonable range in front of the robot. Challenges of such a real-world task are e.g. changing lightning conditions, a dynamic environment and different people shapes. In this thesis a 3D people detection approach based on point cloud data provided by the Microsoft Kinect is implemented and integrated on mobile service robot. A Top-Down/Bottom-Up segmentation is applied to increase the systems flexibility and provided the capability to the detect people even if they are partially occluded. A feature set is proposed to detect people in various pose configurations and motions using a machine learning technique. The system can detect people up to a distance of 5 meters. The experimental evaluation compared different machine learning techniques and showed that standing people can be detected with a rate of 87.29% and sitting people with 74.94% using a Random Forest classifier. Certain objects caused several false detections. To elimante those a verification is proposed which further evaluates the persons shape in the 2D space. The detection component has been implemented as s sequential (frame rate of 10 Hz) and a parallel application (frame rate of 16 Hz). Finally, the component has been embedded into complete people search task which explorates the environment, find all people and approach each detected person.
Der zunehmende Wunsch der Verbraucher nach einem natürlichen Lebensstil führt unter anderem zu einem erhöhten Konsum von Rohmilch und Milchprodukten aus unpasteurisierter Milch (Hudopisk et al., 2013). Rohmilchkonsumenten bevorzugen Rohmilch zum Einen wegen des subjektiven Eindrucks eines besseren Geschmacks und zum Anderen versprechen sie sich gesundheitliche Vorteile, wie eine reduzierte Empfindlichkeit gegen Allergien und eine bessere Qualität der enthaltenen Nährstoffe, durch den Verzehr unbehandelter Milch (Claeys et al., 2014). Mit dem Konsum von Rohmilch gehen allerdings mikrobiologische Risiken einher, da Rohmilch aufgrund ihres neutralen pH-Wertes, dem hohen Nährstoffgehalt und der hohen Wasseraktivität einen guten Nährboden für mikrobielles Wachstum darstellt. Das Wachstum von verschiedenen Mikroorganismen wird dabei größtenteils durch die Temperatur, die kompetitive Begleitflora und die Anwesenheit von Hemmstoffen beeinflusst (Claeys et al., 2013).Mögliche Kontaminationen der Rohmilch resultieren entweder aus einer direkten Abgabe von Mikroorganismen durch das Euter, als Konsequenz von Entzündungen oder durch eine indirekte Kontamination während des Melkvorgangs oder der späteren Handhabung (EFSA, 2015).
Publikation Umweltdaten
(2009)
Der Einsatz von Agentensystemen ist vielfältig, dennoch sind aktuelle Realisierungen lediglich in der Lage primär regelkonformes oder aber „geskriptetes“ Verhalten auch unter Einsatz von randomisierten Verfahren abzubilden. Für eine realistische Repräsentation sind jedoch auch Abweichungen von den Regeln notwendig, die nicht zufällig sondern kontextbedingt auftreten. Im Rahmen dieses Forschungsprojektes wurde ein realitätsnaher Straßenverkehrssimulator realisiert, der mittels eines detailliert definierten Systems für kognitive Agenten auch diese irregulären Verhaltensweisen generiert und somit ein realistisches Verkehrsverhalten für die Verwendung in VR-Anwendungen simuliert. Durch das Erweitern der Agenten mit psychologischen Persönlichkeitsprofilen, basierend auf dem „Fünf-Faktoren-Modell“, zeigen die Agenten individualisierte und gleichzeitig konsistente Verhaltensmuster. Ein dynamisches Emotionsmodell sorgt zusätzlich für eine situationsbedingte Adaption des Verhaltens, z.B. bei langen Wartezeiten. Da die detaillierte Simulation kognitiver Prozesse, der Persönlichkeitseinflüsse und der emotionalen Zustände erhebliche Rechenleistungen verlangt, wurde ein mehrschichtiger Simulationsansatz entwickelt, der es erlaubt den Detailgrad der Berechnung und Darstellung jedes Agenten während der Simulation stufenweise zu verändern, so dass alle im System befindlichen Agenten konsistent simuliert werden können. Im Rahmen diverser Evaluierungsiterationen in einer bestehenden VR-Anwendung – dem FIVIS-Fahrradfahrsimulator des Antragstellers - konnte eindrucksvoll nachgewiesen werden, dass die realisierten Konzepte die ursprünglich formulierten Forschungsfragestellung überzeugend und effizient lösen.
The objective of this research project is to develop a user-friendly and cost-effective interactive input device that allows intuitive and efficient manipulation of 3D objects (6 DoF) in virtual reality (VR) visualization environments with flat projections walls. During this project, it was planned to develop an extended version of a laser pointer with multiple laser beams arranged in specific patterns. Using stationary cameras observing projections of these patterns from behind the screens, it is planned to develop an algorithm for reconstruction of the emitter’s absolute position and orientation in space. Laser pointer concept is an intuitive way of interaction that would provide user with a familiar, mobile and efficient navigation though a 3D environment. In order to navigate in a 3D world, it is required to know the absolute position (x, y and z position) and orientation (roll, pitch and yaw angles) of the device, a total of 6 degrees of freedom (DoF). Ordinary laser-based pointers when captured on a flat surface with a video camera system and then processed, will only provide x and y coordinates effectively reducing available input to 2 DoF only. In order to overcome this problem, an additional set of multiple (invisible) laser pointers should be used in the pointing device. These laser pointers should be arranged in a way that the projection of their rays will form one fixed dot pattern when intersected with the flat surface of projection screens. Images of such a pattern will be captured via a real-time camera-based system and then processed using mathematical re-projection algorithms. This would allow the reconstruction of the full absolute 3D pose (6 DoF) of the input device. Additionally, multi-user or collaborative work should be supported by the system, would allow several users to interact with a virtual environment at the same time. Possibilities to port processing algorithms into embedded processors or FPGAs will be investigated during this project as well.
Ziel des hier beschriebenen Forschungsprojekts war die Entwicklung eines prototypischen Fahrradfahrsimulators für den Einsatz in der Verkehrserziehung und im Verkehrssicherheitstraining. Der entwickelte Prototyp soll möglichst universell für verschiedene Altersklassen und Applikationen einsetzbar sowie mobil sein.