Refine
H-BRS Bibliography
- yes (313)
Departments, institutes and facilities
- Institute of Visual Computing (IVC) (313) (remove)
Document Type
- Conference Object (210)
- Article (65)
- Report (14)
- Part of a Book (6)
- Conference Proceedings (5)
- Book (monograph, edited volume) (4)
- Doctoral Thesis (4)
- Part of Periodical (2)
- Contribution to a Periodical (1)
- Research Data (1)
Year of publication
Keywords
- FPGA (12)
- Virtual Reality (10)
- 3D user interface (7)
- virtual reality (7)
- haptics (5)
- Augmented Reality (4)
- Education (4)
- Perception (4)
- Virtuelle Realität (4)
- Augmented reality (3)
We describe a systematic approach for rendering time-varying simulation data produced by exa-scale simulations, using GPU workstations. The data sets we focus on use adaptive mesh refinement (AMR) to overcome memory bandwidth limitations by representing interesting regions in space with high detail. Particularly, our focus is on data sets where the AMR hierarchy is fixed and does not change over time. Our study is motivated by the NASA Exajet, a large computational fluid dynamics simulation of a civilian cargo aircraft that consists of 423 simulation time steps, each storing 2.5 GB of data per scalar field, amounting to a total of 4 TB. We present strategies for rendering this time series data set with smooth animation and at interactive rates using current generation GPUs. We start with an unoptimized baseline and step by step extend that to support fast streaming updates. Our approach demonstrates how to push current visualization workstations and modern visualization APIs to their limits to achieve interactive visualization of exa-scale time series data sets.
Modern GPUs come with dedicated hardware to perform ray/triangle intersections and bounding volume hierarchy (BVH) traversal. While the primary use case for this hardware is photorealistic 3D computer graphics, with careful algorithm design scientists can also use this special-purpose hardware to accelerate general-purpose computations such as point containment queries. This article explains the principles behind these techniques and their application to vector field visualization of large simulation data using particle tracing.
In diesem Artikel wird darüber berichtet, ob die Glaubwürdigkeit von Avataren als mögliches Modulationskriterium für die virtuelle Expositionstherapie von Agoraphobie in Frage kommt. Dafür werden mehrere Glaubwürdigkeitsstufen für Avatare, die hypothetisch einen Einfluss auf die virtuelle Expositionstherapie von Agoraphobie haben könnten sowie ein potentielles Expositionsszenario entwickelt. Die Arbeit kann innerhalb einer Studie einen signifikanten Einfluss der Glaubwürdigkeitsstufen auf Präsenz, Kopräsenz und Realismus aufzeigen.
Ausgangspunkt der im Folgenden vorgestellten Semesterstruktur war die Umstellung der vorhandenen Diplomstudiengänge auf den Bachelor-Abschluss. Am Fachbereich werden drei grundständige Studiengänge angeboten; die technischen Studiengänge Elektrotechnik und Maschinenbau sowie der interdisziplinäre Studiengang Technikjournalismus, der den Geistes- und Sozialwissenschaften zuzurechnen ist. Ebenfalls sind duale Studiengänge vorhanden, die an grundständige Studiengänge angelehnt sind.
Seit 2012 wird an der Hochschule Bonn-Rhein-Sieg die Studieneingangsphase im Qualitätspakt Lehre gefördert. Ein wesentliches Anliegen im Projekt „Pro-MINT-us“ ist die Einbeziehung der gesamten Hochschule, um keine isolierten Maßnahmen anzubieten, sondern die im Projekt entwickelten Lehrideen nachhaltig zu verankern.
An electronic display often has to present information from several sources. This contribution reports about an approach, in which programmable logic (FPGA) synchronises and combines several graphics inputs. The application area is computer graphics, especially rendering of large 3D models, which is a computing intensive task. Therefore, complex scenes are generated on parallel systems and merged to give the requested output image. So far, the transportation of intermediate results is often done by a local area network. However, as this can be a limiting factor, the new approach removes this bottleneck and combines the graphic signals with an FPGA.
Elektronik für Entscheider
(2008)
Die Entwicklung, Produktion und Vermarktung elektronischer Güter ist ein bedeutender Wirtschaftsfaktor, an dem Menschen mit verschiedenen Ausbildungen beteiligt sind. Um Produkte zum richtigen Preis, mit den richtigen Eigenschaften und zum richtigen Zeitpunkt anbieten zu können, müssen die Verantwortlichen eines Projektes miteinander über Projektziele kommunizieren können.
Dieses Buch ist für Manager, Betriebswirte, Juristen, PR-Fachleute und Journalisten geschrieben, aber auch für Informatiker und Ingenieure aus allen Fachgebieten, die sich beruflich mit Produkten der Elektronik beschäftigen. Ihnen wird die Möglichkeit gegeben, sich ein Stück auf das Gebiet der Elektronik zu begeben, um sowohl Aufgaben als auch Sprache und Vorgehensweise von Elektroingenieuren zu verstehen. Ziel ist es dabei nicht, nach dem Lesen dieses Buches eine elektronische Schaltung entwickeln zu können. Im Vordergrund steht vielmehr ein generelles Verständnis für die Zusammenhänge und Grundbegriffe der Elektronik.
Technik ist heutzutage allgegenwärtig und beeinflusst Wirtschaft und Gesellschaft. Die Bundesrepublik Deutschland erwirtschaftet als Industriestaat ihr Bruttosozialprodukt zu einem bedeutenden Anteil aus der Entwicklung und Produktion von technischen Gütern. Hieran sind Personen mit unterschiedlicher Ausbildung in verschiedenen Tätigkeiten beteiligt. Ingenieure kümmern sich um die Technik, Betriebswirte um die Finanzen, Juristen um rechtliche Fragen. So zumindest die Theorie.
Qualifikation für gute Lehre
(2010)
Eine von insgesamt sechs Arbeitsgruppen der Jahrestagung des HRK Bologna-Zentrums 2009 beschäftigte sich mit dem Themenbereich "Qualifikation für gute Lehre". Nach zwei Impulsvorträgen diskutierten die Teilnehmer, wie Hochschulangehörige noch stärker als bisher für die Lehre
qualifiziert werden können.
Low power dissipation is a current topic in digital design, and therefore, it should be covered in a state-of-the-art electrical engineering curriculum. This paper describes how low-power design can be addressed within a digital design course. Doing so would be beneficial for both topics because low-power design is not detached from the systems perspective, and the digital design course would be enriched by references to current challenges and applications. Thus, the presented course should serve as an example of how a course can be developed to also teach students about sustainable engineering.
Elektronik für Entscheider
(2017)
Dieses Buch gibt Nichtingenieuren, die sich beruflich mit Elektronik beschäftigen, die Möglichkeit, sich ein Stück auf dieses Fachgebiet zu begeben, um Aufgaben, Sprache und Vorgehensweise von Ingenieuren zu verstehen. Ziel ist es dabei nicht, nach dem Lesen dieses Buches eine elektronische Schaltung entwickeln zu können. Im Vordergrund steht vielmehr ein generelles Verständnis für die Zusammenhänge und Grundbegriffe der Elektronik.
This paper introduces FaceHaptics, a novel haptic display based on a robot arm attached to a head-mounted virtual reality display. It provides localized, multi-directional and movable haptic cues in the form of wind, warmth, moving and single-point touch events and water spray to dedicated parts of the face not covered by the head-mounted display.The easily extensible system, however, can principally mount any type of compact haptic actuator or object. User study 1 showed that users appreciate the directional resolution of cues, and can judge wind direction well, especially when they move their head and wind direction is adjusted dynamically to compensate for head rotations. Study 2 showed that adding FaceHaptics cues to a VR walkthrough can significantly improve user experience, presence, and emotional responses.
Advances in computer graphics enable us to create digital images of astonishing complexity and realism. However, processing resources are still a limiting factor. Hence, many costly but desirable aspects of realism are often not accounted for, including global illumination, accurate depth of field and motion blur, spectral effects, etc. especially in real‐time rendering. At the same time, there is a strong trend towards more pixels per display due to larger displays, higher pixel densities or larger fields of view. Further observable trends in current display technology include more bits per pixel (high dynamic range, wider color gamut/fidelity), increasing refresh rates (better motion depiction), and an increasing number of displayed views per pixel (stereo, multi‐view, all the way to holographic or lightfield displays). These developments cause significant unsolved technical challenges due to aspects such as limited compute power and bandwidth. Fortunately, the human visual system has certain limitations, which mean that providing the highest possible visual quality is not always necessary. In this report, we present the key research and models that exploit the limitations of perception to tackle visual quality and workload alike. Moreover, we present the open problems and promising future research targeting the question of how we can minimize the effort to compute and display only the necessary pixels while still offering a user full visual experience.
In recent years, a variety of methods have been introduced to exploit the decrease in visual acuity of peripheral vision, known as foveated rendering. As more and more computationally involved shading is requested and display resolutions increase, maintaining low latencies is challenging when rendering in a virtual reality context. Here, foveated rendering is a promising approach for reducing the number of shaded samples. However, besides the reduction of the visual acuity, the eye is an optical system, filtering radiance through lenses. The lenses create depth-of-field (DoF) effects when accommodated to objects at varying distances. The central idea of this article is to exploit these effects as a filtering method to conceal rendering artifacts. To showcase the potential of such filters, we present a foveated rendering system, tightly integrated with a gaze-contingent DoF filter. Besides presenting benchmarks of the DoF and rendering pipeline, we carried out a perceptual study, showing that rendering quality is rated almost on par with full rendering when using DoF in our foveated mode, while shaded samples are reduced by more than 69%.
Rendering techniques for design evaluation and review or for visualizing large volume data often use computationally expensive ray-based methods. Due to the number of pixels and the amount of data, these methods often do not achieve interactive frame rates. A view direction based rendering technique renders the users central field of view in high quality whereas the surrounding is rendered with a level of detail approach depending on the distance to the users central field of view thus giving the opportunity to increase rendering efficiency. We propose a prototype implementation and evaluation of a focus-based rendering technique based on a hybrid ray tracing/sparse voxel octree rendering approach.
In contrast to projection-based systems, large, high resolution multi-display systems offer a high pixel density on a large visualization area. This enables users to step up to the displays and see a small but highly detailed area. If the users move back a few steps they don't perceive details at pixel level but will instead get an overview of the whole visualization. Rendering techniques for design evaluation and review or for visualizing large volume data (e.g. Big Data applications) often use computationally expensive ray-based methods. Due to the number of pixels and the amount of data, these methods often do not achieve interactive frame rates.
A view direction based (VDB) rendering technique renders the user's central field of view in high quality whereas the surrounding is rendered with a level-of-detail approach depending on the distance to the user's central field of view. This approach mimics the physiology of the human eye and conserves the advantage of highly detailed information when standing close to the multi-display system as well as the general overview of the whole scene. In this paper we propose a prototype implementation and evaluation of a focus-based rendering technique based on a hybrid ray tracing/sparse voxel octree rendering approach.
We present a system that combines voxel and polygonal representations into a single octree acceleration structure that can be used for ray tracing. Voxels are well-suited to create good level-of-detail for high-frequency models where polygonal simplifications usually fail due to the complex structure of the model. However, polygonal descriptions provide the higher visual fidelity. In addition, voxel representations often oversample the geometric domain especially for large triangles, whereas a few polygons can be tested for intersection more quickly.
In dieser Arbeit wird eine Methode zur Darstellung und Generierung von natürlich wirkendem Bewuchs auf besonders großen Arealen und unter Berücksichtigung ökologischer Faktoren vorgestellt. Die Generierung und Visualisierung von Bewuchs ist aufgrund der Komplexität biologischer Systeme und des Detailreichtums von Pflanzenmodellen ein herausforderndes Gebiet der Computergrafik und ermöglicht es, den Realismus von Landschaftsvisualisierungen erheblich zu steigern. Aufbauend auf [DMS06] wird bei Silva der Bewuchs so generiert, dass die zur Darstellung benötigten Wang-Kacheln und die mit ihnen assoziierten Teilverteilungen wiederverwendet werden können. Dazu wird ein Verfahren vorgestellt, um Poisson Disk Verteilungen mit variablen Radien auf nahtlosen Wang-Kachelmengen ohne rechenintensive globale Optimierung zu erzeugen. Durch die Einbeziehung von Nachbarschaften und frei konfigurierbaren Generierungspipelines können beliebige abiotische und biotische Faktoren bei der Bewuchsgenerierung berücksichtigt werden. Die durch Silva auf Wang-Kacheln erzeugten Pflanzenverteilungen ermöglichen, die darauf aufgebauten beschleunigenden Datenstrukturen bei der Visualisierung wieder zu verwenden. Durch Multi-Level Instancing und eine Schachtelung von Kd-Bäumen ist eine Visualisierung von großen bewachsenen Arealen mit geringen Renderzeiten und geringem Memoryfootprint von Hunderten Quadratkilometern Größe möglich.
Generating and visualizing large areas of vegetation that look natural makes terrain surfaces much more realistic. However, this is a challenging field in computer graphics, because ecological systems are complex and visually appealing plant models are geometrically detailed. This work presents Silva (System for the Instantiation of Large Vegetated Areas), a system to generate and visualize large vegetated areas based on the ecological surrounding. Silva generates vegetation on Wang-tiles with associated reusable distributions enabling multi-level instantiation. This paper presents a method to generate Poisson Disc Distributions (PDDs) with variable radii on Wang-tile sets (without a global optimization) that is able to generate seamless tilings. Because Silva has a freely configurable generation pipeline and can consider plant neighborhoods it is able to incorporate arbitrary abiotic and biotic components during generation. Based on multi-levelinstancing and nested kd-trees, the distributions on the Wang-tiles allow their acceleration structures to be reused during visualization. This enables Silva to visualize large vegetated areas of several hundred square kilometers with low render times and a small memory footprint.
Computer graphics research strives to synthesize images of a high visual realism that are indistinguishable from real visual experiences. While modern image synthesis approaches enable to create digital images of astonishing complexity and beauty, processing resources remain a limiting factor. Here, rendering efficiency is a central challenge involving a trade-off between visual fidelity and interactivity. For that reason, there is still a fundamental difference between the perception of the physical world and computer-generated imagery. At the same time, advances in display technologies drive the development of novel display devices. The dynamic range, the pixel densities, and refresh rates are constantly increasing. Display systems enable a larger visual field to be addressed by covering a wider field-of-view, due to either their size or in the form of head-mounted devices. Currently, research prototypes are ranging from stereo and multi-view systems, head-mounted devices with adaptable lenses, up to retinal projection, and lightfield/holographic displays. Computer graphics has to keep step with, as driving these devices presents us with immense challenges, most of which are currently unsolved. Fortunately, the human visual system has certain limitations, which means that providing the highest possible visual quality is not always necessary. Visual input passes through the eye’s optics, is filtered, and is processed at higher level structures in the brain. Knowledge of these processes helps to design novel rendering approaches that allow the creation of images at a higher quality and within a reduced time-frame. This thesis presents the state-of-the-art research and models that exploit the limitations of perception in order to increase visual quality but also to reduce workload alike - a concept we call perception-driven rendering. This research results in several practical rendering approaches that allow some of the fundamental challenges of computer graphics to be tackled. By using different tracking hardware, display systems, and head-mounted devices, we show the potential of each of the presented systems. The capturing of specific processes of the human visual system can be improved by combining multiple measurements using machine learning techniques. Different sampling, filtering, and reconstruction techniques aid the visual quality of the synthesized images. An in-depth evaluation of the presented systems including benchmarks, comparative examination with image metrics as well as user studies and experiments demonstrated that the methods introduced are visually superior or on the same qualitative level as ground truth, whilst having a significantly reduced computational complexity.
Virtual reality environments are increasingly being used to encourage individuals to exercise more regularly, including as part of treatment in those with mental health or neurological disorders. The success of virtual environments likely depends on whether a sense of presence can be established, where participants become fully immersed in the virtual environment. Exposure to virtual environments is associated with physiological responses, including cortical activation changes. Whether the addition of a real exercise within a virtual environment alters sense of presence perception, or the accompanying physiological changes, is not known. In a randomized and controlled study design, trials of moderate-intensity exercise (i.e. self-paced cycling) and no-exercise (i.e. automatic propulsion) were performed within three levels of virtual environment exposure. Each trial was 5-min in duration and was followed by post-trial assessments of heart rate, perceived sense of presence, EEG, and mental state. Changes in psychological strain and physical state were generally mirrored by neural activation patterns. Furthermore these change indicated that exercise augments the demands of virtual environment exposures and this likely contributed to an enhanced sense of presence.
A Low-Cost Based 6 DoF Head Tracker for Usability Application Studies in Virtual Environments
(2008)
Simultaneous detection of cyanide and heavy metals for environmental analysis by means of µISEs
(2010)
We propose a high-performance GPU implementation of Ray Histogram Fusion (RHF), a denoising method for stochastic global illumination rendering. Based on the CPU implementation of the original algorithm, we present a naive GPU implementation and the necessary optimization steps. Eventually, we show that our optimizations increase the performance of RHF by two orders of magnitude when compared to the original CPU implementation and one order of magnitude compared to the naive GPU implementation. We show how the quality for identical rendering times relates to unfiltered path tracing and how much time is needed to achieve identical quality when compared to an unfiltered path traced result. Finally, we summarize our work and describe possible future applications and research based on this.
The work at hand outlines a recording setup for capturing hand and finger movements of musicians. The focus is on a series of baseline experiments on the detectability of coloured markers under different lighting conditions. With the goal of capturing and recording hand and finger movements of musicians in mind, requirements for such a system and existing approaches are analysed and compared. The results of the experiments and the analysis of related work show that the envisioned setup is suited for the expected scenario.
Lower back pain is one of the most prevalent diseases in Western societies. A large percentage of European and American populations suffer from back pain at some point in their lives. One successful approach to address lower back pain is postural training, which can be supported by wearable devices, providing real-time feedback about the user’s posture. In this work, we analyze the changes in posture induced by postural training. To this end, we compare snapshots before and after training, as measured by the Gokhale SpineTracker™. Considering pairs of before and after snapshots in different positions (standing, sitting, and bending), we introduce a feature space, that allows for unsupervised clustering. We show that resulting clusters represent certain groups of postural changes, which are meaningful to professional posture trainers.
Motion capture, often abbreviated mocap, generally aims at recording any kind of motion -- be it from a person or an object -- and to transform it to a computer-readable format. Especially the data recorded from (professional and non-professional) human actors are typically used for analysis in e.g. medicine, sport sciences, or biomechanics for evaluation of human motion across various factors. Motion capture is also widely used in the entertainment industry: In video games and films realistic motion sequences and animations are generated through data-driven motion synthesis based on recorded motion (capture) data.
Although the amount of publicly available full-body-motion capture data is growing, the research community still lacks a comparable corpus of specialty motion data such as, e.g. prehensile movements for everyday actions. On the one hand, such data can be used to enrich (hand-over animation) full-body motion capture data - usually captured without hand motion data due to the drastic dimensional difference in articulation detail. On the other hand, it provides means to classify and analyse prehensile movements with or without respect to the concrete object manipulated and to transfer the acquired knowledge to other fields of research (e.g. from 'pure' motion analysis to robotics or biomechanics).
Therefore, the objective of this motion capture database is to provide well-documented, free motion capture data for research purposes.
The presented database GraspDB14 in sum contains over 2000 prehensile movements of ten different non-professional actors interacting with 15 different objects. Each grasp was realised five times by each actor. The motions are systematically named containing an (anonymous) identifier for each actor as well as one for the object grasped or interacted with.
The data were recorded as joint angles (and raw 8-bit sensor data) which can be transformed into positional 3D data (3D trajectories of each joint).
In this document, we provide a detailed description on the GraspDB14-database as well as on its creation (for reproducibility).
Chapter 2 gives a brief overview of motion capture techniques, freely available motion capture databases for both, full body motions and hand motions, and a short section on how such data is made useful and re-used. Chapter 3 describes the database recording process and details the recording setup and the recorded scenarios. It includes a list of objects and performed types of interaction. Chapter 4 covers used file formats, contents, and naming patterns. We provide various tools for parsing, conversion, and visualisation of the recorded motion sequences and document their usage in chapter 5.
It is challenging to provide users with a haptic weight sensation of virtual objects in VR since current consumer VR controllers and software-based approaches such as pseudo-haptics cannot render appropriate haptic stimuli. To overcome these limitations, we developed a haptic VR controller named Triggermuscle that adjusts its trigger resistance according to the weight of a virtual object. Therefore, users need to adapt their index finger force to grab objects of different virtual weights. Dynamic and continuous adjustment is enabled by a spring mechanism inside the casing of an HTC Vive controller. In two user studies, we explored the effect on weight perception and found large differences between participants for sensing change in trigger resistance and thus for discriminating virtual weights. The variations were easily distinguished and associated with weight by some participants while others did not notice them at all. We discuss possible limitations, confounding factors, how to overcome them in future research and the pros and cons of this novel technology.
Large, high-resolution displays demonstrated their effectiveness in lab settings for cognitively demanding tasks in single user and collaborative scenarios. The effectiveness is mostly reached through inherent displays' properties - large display real estate and high resolution - that allow for visualization of complex datasets, and support of group work and embodied interaction. To raise users' efficiency, however, more sophisticated user support in the form of advanced user interfaces might be needed. For that we need profound understanding of how large, tiled displays impact users work and behavior. We need to extract behavioral patterns for different tasks and data types. This paper reports on study results of how users, while working collaboratively, process spatially fixed items on large, tiled displays. The results revealed a recurrent pattern showing that users prefer to process documents column wise rather than row wise or erratic.
Large, high-resolution displays are highly suitable for creation of digital environments for co-located collaborative task solving. Yet, placing multiple users in a shared environment may increase the risk of interferences, thus causing mental discomfort and decreasing efficiency of the team. To mitigate interferences coordination strategies and techniques were introduced. However, in a mixed-focus collaboration scenarios users switch now and again between loosely and tightly collaboration, therefore different coordination techniques might be required depending on the current collaboration state of team members. For that, systems have to be able to recognize collaboration states as well as transitions between them to ensure a proper adjustment of the coordination strategy. Previous studies on group behavior during collaboration in front of large displays investigated solely collaborative coupling states, not transitions between them though. To address this gap, we conducted a study with 12 participant dyads in front of a tiled display and let them solve two tasks in two different conditions (focus and overview). We looked into group dynamics and categorized transitions by means of changes in proximity, verbal communication, visual attention, visual interface, and gestures. The findings can be valuable for user interface design and development of group behavior models.
The steadily decreasing prices of display technologies and computer graphics hardware contribute to the increasing popularity of multiple-display environments, like large, high-resolution displays. It is therefore necessary that educational organizations give the new generation of computer scientists an opportunity to become familiar with this kind of technology. However, there is a lack of tools that allow for getting started easily. Existing frameworks and libraries that provide support for multi-display rendering are often complex in understanding, configuration and extension. This is critical especially in educational context where the time that students have for their projects is limited and quite short. These tools are also rather known and used in research communities only, thus providing less benefit for future non-scientists. In this work we present an extension for the Unity game engine. The extension allows – with a small overhead – for implementation of applications that are apt to run on both single-display and multi-display systems. It takes care of the most common issues in the context of distributed and multi-display rendering like frame, camera and animation synchronization, thus reducing and simplifying the first steps into the topic. In conjunction with Unity, which significantly simplifies the creation of different kinds of virtual environments, the extension affords students to build mock-up virtual reality applications for large, high-resolution displays, and to implement and evaluate new interaction techniques and metaphors and visualization concepts. Unity itself, in our experience, is very popular among computer graphics students and therefore familiar to most of them. It is also often employed in projects of both research institutions and commercial organizations; so learning it will provide students with qualification in high demand.
Supported by their large size and high resolution, display walls suit well for different collaboration types. However, in order to foster instead of impede collaboration processes, interaction techniques need to be carefully designed, taking into regard the possibilities and limitations of the display size, and their effects on human perception and performance. In this paper we investigate the impact of visual distractors (which, for instance, might be caused by other collaborators' input) in peripheral vision on short-term memory and attention. The distractors occur frequently when multiple users collaborate in large wall display systems and may draw attention away from the main task, as such potentially affecting performance and cognitive load. Yet, the effect of these distractors is hardly understood. Gaining a better understanding thus may provide valuable input for designing more effective user interfaces. In this article, we report on two interrelated studies that investigated the effect of distractors. Depending on when the distractor is inserted in the task performance sequence, as well as the location of the distractor, user performance can be disturbed: we will show that distractors may not affect short term memory, but do have an effect on attention. We will closely look into the effects, and identify future directions to design more effective interfaces.
This paper presents groupware to study group behavior while conducting a creative task on large, high-resolution displays. Moreover, we present the results of a between-subjects study. In the study, 12 groups with two participants each prototyped a 2D level on a 7m x 2.5m large, high-resolution display using tablet-PCs for interaction. Six groups underwent a condition where group members had equal roles and interaction possibilities. Another six groups worked in a condition where group members had different roles: level designer and 2D artist. The results revealed that in the different roles condition, the participants worked significantly more tightly and created more assets. We could also detect some shortcomings for that configuration. We discuss the gained insights regarding system configuration, groupware interfaces, and groups behavior.
In this paper we present the steps towards a well-designed concept of a 5VR6 system for school experiments in scientific domains like physics, biology and chemistry. The steps include the analysis of system requirements in general, the analysis of school experiments and the analysis of input and output devices demands. Based on the results of these steps we show a taxonomy of school experiments and provide a comparison between several currently available devices which can be used for building such a system. We also compare the advantages and shortcomings of 5VR6 and 5AR6 systems in general to show why, in our opinion, 5VR6 systems are better suited for school-use.
Large display environments are highly suitable for immersive analytics. They provide enough space for effective co-located collaboration and allow users to immerse themselves in the data. To provide the best setting - in terms of visualization and interaction - for the collaborative analysis of a real-world task, we have to understand the group dynamics during the work on large displays. Among other things, we have to study, what effects different task conditions will have on user behavior.
In this paper, we investigated the effects of task conditions on group behavior regarding collaborative coupling and territoriality during co-located collaboration on a wall-sized display. For that, we designed two tasks: a task that resembles the information foraging loop and a task that resembles the connecting facts activity. Both tasks represent essential sub-processes of the sensemaking process in visual analytics and cause distinct space/display usage conditions. The information foraging activity requires the user to work with individual data elements to look into details. Here, the users predominantly occupy only a small portion of the display. In contrast, the connecting facts activity requires the user to work with the entire information space. Therefore, the user has to overview the entire display.
We observed 12 groups for an average of two hours each and gathered qualitative data and quantitative data. During data analysis, we focused specifically on participants' collaborative coupling and territorial behavior.
We could detect that participants tended to subdivide the task to approach it, in their opinion, in a more effective way, in parallel. We describe the subdivision strategies for both task conditions. We also detected and described multiple user roles, as well as a new coupling style that does not fit in either category: loosely or tightly. Moreover, we could observe a territory type that has not been mentioned previously in research. In our opinion, this territory type can affect the collaboration process of groups with more than two collaborators negatively. Finally, we investigated critical display regions in terms of ergonomics. We could detect that users perceived some regions as less comfortable for long-time work.
Effects of Workspace Awareness and Territoriality in Environments with Large, Shared Displays
(2016)
Synchronous cooperative work of multiple collaborators in large, high-resolution display systems comprises such psychological phenomena like workspace awareness and human territoriality. The phenomena and interplay between them can cause a significant impact on human-human and human-environment interaction. In a non-digital environment humans rely on their own physical abilities, utilities, and social protocols to control those phenomena (e.g. close eyes, or use earplugs to reduce workspace awareness; rotate oneself towards collaborators to increase workspace awareness). Digital environments, on the other hand, provide us with a possibility to ease, automate, and unify control processes, thus taking off that burden from users. Yet, we have to understand first, what effects workspace awareness and territoriality have within a collaborative environment. The aim of this doctoral thesis is to investigate effects of workspace awareness and territoriality on users and interaction processes in mixed-focus scenarios of various collaborative settings.
Gone But Not Forgotten: Evaluating Performance and Scalability of Real-Time Mesoscopic Agents
(2020)
Simulating eye movements for virtual humans or avatars can improve social experiences in virtual reality (VR) games, especially when wearing head mounted displays. While other researchers have already demonstrated the importance of simulating meaningful eye movements, we compare three gaze models with different levels of fidelity regarding realism: (1) a base model with static fixation and saccadic movements, (2) a proposed simulation model that extends the saccadic model with gaze shifts based on a neural network, and (3) a user's real eye movements recorded by a proprietary eye tracker. Our between-groups design study with 42 subjects evaluates impact of eye movements on social VR user experience regarding perceived quality of communication and presence. The tasks include free conversation and two guessing games in a co-located setting. Results indicate that a high quality of communication in co-located VR can be achieved without using extended gaze behavior models besides saccadic simulation. Users might have to gain more experience with VR technology before being able to notice subtle details in gaze animation. In the future, remote VR collaboration involving different tasks requires further investigation.
Traffic simulations are typically concerned with modeling human behavior as closely as possible to create realistic results. In conventional traffic simulations used for road planning or traffic jam prediction only the overall behavior of an entire system is of interest. In virtual environments, like digital games, simulated traffic participants are merely a backdrop to the player’s experience and only need to be “sufficiently realistic”. Additionally, restricted computational resources, typical for virtual environment applications, usually limit the complexity of simulated behavior in this field. More importantly, two integral aspects of real-world traffic are not considered in current traffic simulations from both fields: misbehavior and risk taking of traffic participants. However, for certain applications like the FIVIS bicycle simulator, these aspects are essential.
Populating virtual worlds with intelligent agents can drastically improve a user's sense of presence. Applying these worlds to virtual training, simulations, or (serious) games, often requires multiple agents to be simulated in real time. The process of generating believable agent behavior starts with providing a plausible perception and attention process that is both efficient and controllable. We describe a conceptual framework for synthetic perception that specifically considers the mentioned requirements: plausibility, real-time performance, and controllability. A sample implementation will focus on sensing, attention, and memory to demonstrate the framework's capabilities in a real-time game engine scenario. A combination of dynamic geometric sensing and false coloring with static saliency information is provided to exemplify the collection of environmental stimuli. The subsequent attention process handles both bottom-up processing and task-oriented, top-down factors. Behavioral results can be influenced by controlling memory and attention The example case is demonstrated and discussed alongside future extensions.
Integration of Multi-modal Cues in Synthetic Attention Processes to Drive Virtual Agent Behavior
(2017)
Traffic simulations for virtual environments are concerned with the behavior of individual traffic participants. The complexity of behavior in these simulations is often rather simple to abide by the constraints of processing resources. In sophisticated traffic simulations, the behavior of individual traffic participants is also modeled, but the focus lies on the overall behavior of the entire system, e.g. to identify possible bottle necks of traffic flow [8].
Using virtual environment systems for road safety education requires a realistic simulation of road traffic. Current traffic simulations are either too restricted in their complexity of agent behavior or focus on aspects not important in virtual environments. More importantly, none of them are concerned with modeling misbehavior of traffic participants which is part of every-day traffic and should therefore not be neglected in this context. We present a concept for a traffic simulation that addresses the need for more realistic agent behavior with regard to road safety education. The two major components of this concept are a simulation of persistent agents which minimizes computational overhead and a model of cognitive processes of human drivers combined with psychological personality profiles to allow for individual behavior and misbehavior.
Evaluation of a Multi-Layer 2.5D display in comparison to conventional 3D stereoscopic glasses
(2020)
In this paper we propose and evaluate a custom-build projection-based multilayer 2.5D display, consisting of three layers of images, and compare performance to a stereoscopic 3D display. Stereoscopic vision can increase the involvement and enhance game experience, however may induce possible side effects, e.g. motion sickness and simulator sickness. To overcome the disadvantage of multiple discrete depths, in our system perspective rendering and head-tracking is used. A study was performed to evaluate this display with 20 participants playing custom-designed games. The results indicated that the multi-layer display caused fewer side effects than the stereoscopic display and provided good usability. The participants also stated a better or equal spatial perception, while the cognitive load stayed the same.
A Bicycle Simulator Based on a Motion Platform in a Virtual Reality Environment - FIVIS Project
(2007)
The objective of the presented approach is to develop a 3D-reconstruction method for micro organisms from sequences of microscopic images by varying the level-of-focus. The approach is limited to translucent silicatebased marine and freshwater organisms (e.g. radiolarians). The proposed 3D-reconstruction method exploits the connectivity of similarly oriented and spatially adjacent edge elements in consecutive image layers. This yields a 3D-mesh representing the global shape of the objects together with details of the inner structure. Possible applications can be found in comparative morphology or hydrobiology, where e.g. deficiencies in growth and structure during incubation in toxic water or gravity effects on metabolism have to be determined.
Reversible logic synthesis is an emerging research topic with different application areas like low-power CMOS design, quantum- and optical computing. The key motivation behind reversible logic synthesis is the optimization of the heat dissipation problem current architectures show, by reducing it to theoretically zero [2].
Along with the success of the digitally revived stereoscopic cinema, other events beyond 3D movies become attractive for movie theater operators, i.e. interactive 3D games. In this paper, we present a case that explores possible challenges and solutions for interactive 3D games to be played by a movie theater audience. We analyze the setting and showcase current issues related to lighting and interaction. Our second focus is to provide gameplay mechanics that make special use of stereoscopy, especially depth-based game design. Based on these results, we present YouDash3D, a game prototype that explores public stereoscopic gameplay in a reduced kiosk setup. It features live 3D HD video stream of a professional stereo camera rig rendered in a real-time game scene. We use the effect to place the stereoscopic effigies of players into the digital game. The game showcases how stereoscopic vision can provide for a novel depth-based game mechanic. Projected trigger zones and distributed clusters of the audience video allow for easy adaptation to larger audiences and 3D movie theater gaming.
This contribution describes an optical laser-based user interaction system designed for virtual reality (VR) environments. The project's objective is to realize a 6-DoF user input device for interaction with VR applications running in CAVE-type visualization environments with flat projections walls. In case of a back-projection VR system, in contrast to optical tracking systems, no camera has to be placed within the visualization environment. Instead, cameras observe patterns of laser beam projections from behind the screens. These patterns are emitted by a hand-held input device. The system is robust with respect to partial occlusion of the laser pattern. An inertial measurement unit is integrated into the device in order to improve robustness and precision.
This contribution presents an easy to implement 3D tracking approach that works with a single standard webcam. We describe the algorithm and show that it is well suited for being used as an intuitive interaction method in 3D video games. The algorithm can detect and distinguish multiple objects in real-time and obtain their orientation and position relative to the camera. The trackable objects are equipped with planar patterns of five visual markers. By tracking (stereo) glasses worn by the user and adjusting the in-game camera's viewing frustum accordingly, the well-known immersive "screen as a window" effect can be achieved, even without the use of any special tracking equipment.
3D tracking using multiple Nintendo Wii Remotes: a simple consumer hardware tracking approach
(2009)
An easy to build and cost-effective 3D tracking solution is presented, using Nintendo Wii Remotes acting as cameras. As the hardware differs from usual tracking cameras, the calibration and tracking process has to be adapted accordingly. The tracking approach described could be used for tracking the user's motions in video games based upon physical activity (sports, fighting or dancing games), allowing the player to interact with the game in a more intuitive way than by just pressing buttons.