Refine
Departments, institutes and facilities
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (481) (remove)
Document Type
- Conference Object (216)
- Article (178)
- Part of a Book (26)
- Preprint (17)
- Report (11)
- Doctoral Thesis (8)
- Contribution to a Periodical (6)
- Research Data (6)
- Book (monograph, edited volume) (4)
- Part of Periodical (4)
Year of publication
Keywords
- lignin (7)
- Quality diversity (6)
- West Africa (6)
- advanced applications (5)
- modeling of complex systems (5)
- stem cells (5)
- Hydrogen storage (4)
- Lattice Boltzmann Method (4)
- Lignin (4)
- additive (4)
Protocol for conducting advanced cyclic tests in lithium-ion batteries to estimate capacity fade
(2024)
Using advanced cyclic testing techniques improves accuracy in estimating capacity fade and incorporates real-world scenarios in battery cycle aging assessment. Here, we present a protocol for conducting cyclic tests in lithium-ion batteries to estimate capacity fade. We describe steps for implementing strategies for accounting for variations in rest periods, charge-discharge rates, and temperatures. We also detail procedures for validating tests experimentally within a climate-controlled chamber and for developing an empirical model to estimate capacity fading under various testing objectives. For complete details on the use and execution of this protocol, please refer to Mulpuri et al.1.
Traditional and newly developed testing methods were used for extensive application-related characterization of transdermal therapeutic systems (TTS) and pressure sensitive adhesives (PSA). Large amplitude oscillatory shear tests of PSAs were correlated to the material behavior during the patient’s motion and showed that all PSAs were located close to the gel point. Furthermore, an increasing strain amplitude results in stretching and yielding of the PSA´s microstructure causing a consolidation of the network and a release with increasing strain amplitude. RheoTack approach was developed to allow for an advanced tack characterization of TTS with visual inspection. The results showed a clear resin content and rod geometry dependent behavior, and displays the PSA´s viscoelasticity resulting in either high tack and long stretched fibrils or non-adhesion and brittle behavior. Moreover, diffusion of water / sweat during TTS´s application might influence its performance. Therefore, a dielectric analysis based evaluation method displayed occurring water diffusion into the PSA from which the diffusion coefficient can be determined, and showed clear material and resin content dependent behavior. All methods allow for an advanced product-oriented material testing that can be utilized within further TTS development.
Force field (FF) based molecular modeling is an often used method to investigate and study structural and dynamic properties of (bio-)chemical substances and systems. When such a system is modeled or refined, the force field parameters need to be adjusted. This force field parameter optimization can be a tedious task and is always a trade-off in terms of errors regarding the targeted properties. To better control the balance of various properties’ errors, in this study we introduce weighting factors for the optimization objectives. Different weighting strategies are compared to fine-tune the balance between bulk-phase density and relative conformational energies (RCE), using n-octane as a representative system. Additionally, a non-linear projection of the individual property-specific parts of the optimized loss function is deployed to further improve the balance between them. The results show that the overall error is reduced. One interesting outcome is a large variety in the resulting optimized force field parameters (FFParams) and corresponding errors, suggesting that the optimization landscape is multi-modal and very dependent on the weighting factor setup. We conclude that adjusting the weighting factors can be a very important feature to lower the overall error in the FF optimization procedure, giving researchers the possibility to fine-tune their FFs.
Accurate global horizontal irradiance (GHI) forecasting is critical for integrating solar energy into the power grid and operating solar power plants. The Weather Research and Forecasting model with its solar radiation extension (WRF-Solar) has been used to forecast solar irradiance in different regions around the world. However, the application of the WRF-Solar model to the prediction of GHI in West Africa, particularly Ghana, has not yet been investigated. The aim of this study is to evaluate the performance of the WRF-Solar model for predicting GHI in Ghana, focusing on three automatic weather stations (Akwatia, Kumasi and Kologo) for the year 2021. We used two one-way nested domains (D1 = 15 km and D2 = 3 km) to investigate the ability of the fully coupled WRF-Solar model to forecast GHI up to 72-hour ahead under different atmospheric conditions. The initial and lateral boundary conditions were taken from the ECMWF high-resolution operational forecasts. Our findings reveal that the WRF-Solar model performs better under clear skies than cloudy skies. Under clear skies, Kologo performed best in predicting 72-hour GHI, with a first day nRMSE of 9.62 %. However, forecasting GHI under cloudy skies at all three sites had significant uncertainties. Additionally, WRF-Solar model is able to reproduce the observed GHI diurnal cycle under high AOD conditions in most of the selected days. This study enhances the understanding of the WRF-Solar model’s capabilities and limitations for GHI forecasting in West Africa, particularly in Ghana. The findings provide valuable information for stakeholders involved in solar energy generation and grid integration towards optimized management in the region.
In vision tasks, a larger effective receptive field (ERF) is associated with better performance. While attention natively supports global context, convolution requires multiple stacked layers and a hierarchical structure for large context. In this work, we extend Hyena, a convolution-based attention replacement, from causal sequences to the non-causal two-dimensional image space. We scale the Hyena convolution kernels beyond the feature map size up to 191$\times$191 to maximize the ERF while maintaining sub-quadratic complexity in the number of pixels. We integrate our two-dimensional Hyena, HyenaPixel, and bidirectional Hyena into the MetaFormer framework. For image categorization, HyenaPixel and bidirectional Hyena achieve a competitive ImageNet-1k top-1 accuracy of 83.0% and 83.5%, respectively, while outperforming other large-kernel networks. Combining HyenaPixel with attention further increases accuracy to 83.6%. We attribute the success of attention to the lack of spatial bias in later stages and support this finding with bidirectional Hyena.
Pipeline transport is an efficient method for transporting fluids in energy supply and other technical applications. While natural gas is the classical example, the transport of hydrogen is becoming more and more important; both are transmitted under high pressure in a gaseous state. Also relevant is the transport of carbon dioxide, captured in the places of formation, transferred under high pressure in a liquid or supercritical state and pumped into underground reservoirs for storage. The transport of other fluids is also required in technical applications. Meanwhile, the transport equations for different fluids are essentially the same, and the simulation can be performed using the same methods. In this paper, the effect of control elements such as compressors, regulators and flaptraps on the stability of fluid transport simulations is studied. It is shown that modeling of these elements can lead to instabilities, both in stationary and dynamic simulations. Special regularization methods were developed to overcome these problems. Their functionality also for dynamic simulations is demonstrated for a number of numerical experiments.
Die nationale Politik- und Forschungsstrategie Bioökonomie sieht eine Transformation der Wirtschaft vor, bei der die Verwendung fossiler Rohstoffe zunehmend durch den Einsatz nachwachsender Rohstoffe ersetzt wird. Der Einsatz biobasierter Kunststoffe soll dabei gefördert werden. Erste Analysen der Berichterstattung zu Biokunststoffen im Rahmen einer Pilotstudie ergaben, dass der Grundgedanke biologisch abbaubarer Kunststoffe breite Zustimmung im öffentlichen Diskurs erfährt. Abseits der soziopolitischen Diskursebene entwickelt sich jedoch eine medial geführte Diskussion um erhebliche Probleme mit den Stoffen in der Abfallwirtschaft. Die Gefahr besteht nun, dass diese Haltung verbreitet durch die Massenmedien auf die öffentliche Meinung abfärbt. Mangelnde öffentliche Akzeptanz könnte den Erfolg von innovativen Biokunststoff-Produkten gefährden.
The lattice Boltzmann method (LBM) stands apart from conventional macroscopic approaches due to its low numerical dissipation and reduced computational cost, attributed to a simple streaming and local collision step. While this property makes the method particularly attractive for applications such as direct noise computation, it also renders the method highly susceptible to instabilities. A vast body of literature exists on stability-enhancing techniques, which can be categorized into selective filtering, regularized LBM, and multi-relaxation time (MRT) models. Although each technique bolsters stability by adding numerical dissipation, they act on different modes. Consequently, there is not a universal scheme optimally suited for a wide range of different flows. The reason for this lies in the static nature of these methods; they cannot adapt to local or global flow features. Still, adaptive filtering using a shear sensor constitutes an exception to this. For this reason, we developed a novel collision operator that uses space- and time-variant collision rates associated with the bulk viscosity. These rates are optimized by a physically informed neural net. In this study, the training data consists of a time series of different instances of a 2D barotropic vortex solution, obtained from a high-order Navier–Stokes solver that embodies desirable numerical features. For this specific text case our results demonstrate that the relaxation times adapt to the local flow and show a dependence on the velocity field. Furthermore, the novel collision operator demonstrates a better stability-to-precision ratio and outperforms conventional techniques that use an empirical constant for the bulk viscosity.
In addition to the long-term goal of mitigating climate change, the current geopolitical upheavals heighten the urgency to transform Europe's energy system. This involves expanding renewable energies while managing intermittent electricity generation. Hydrogen is a promising solution to balance generation and demand, simultaneously decarbonizing complex applications. To model the energy system's transformation, the project TransHyDE-Sys, funded by the German Federal Ministry of Education and Research, takes an integrated approach beyond traditional energy system analysis, incorporating a diverse range of more detailed methods and tools. Herein, TransHyDE-Sys is situated within the recent policy discussion. It addresses the requirements for energy system modeling to gain insights into transforming the European hydrogen and energy infrastructure. It identifies knowledge gaps in the existing literature on hydrogen infrastructure-oriented energy system modeling and presents the research approach of TransHyDE-Sys. TransHyDE-Sys analyzes the development of hydrogen and energy infrastructures from “the system” and “the stakeholder” perspectives. The integrated modeling landscape captures temporal and spatial interactions among hydrogen, electricity, and natural gas infrastructure, providing comprehensive insights for systemic infrastructure planning. This allows a more accurate representation of the energy system's dynamics and aids in decision-making for achieving sustainable and efficient hydrogen network development integration.
The transport of carbon dioxide through pipelines is one of the important components of Carbon dioxide Capture and Storage (CCS) systems that are currently being developed. If high flow rates are desired a transportation in the liquid or supercritical phase is to be preferred. For technical reasons, the transport must stay in that phase, without transitioning to the gaseous state. In this paper, a numerical simulation of the stationary process of carbon dioxide transport with impurities and phase transitions is considered. We use the Homogeneous Equilibrium Model (HEM) and the GERG-2008 thermodynamic equation of state to describe the transport parameters. The algorithms used allow to solve scenarios of carbon dioxide transport in the liquid or supercritical phase, with the detection of approaching the phase transition region. Convergence of the solution algorithms is analyzed in connection with fast and abrupt changes of the equation of state and the enthalpy function in the region of phase transitions.
This work proposes a novel approach for probabilistic end-to-end all-sky imager-based nowcasting with horizons of up to 30 min using an ImageNet pre-trained deep neural network. The method involves a two-stage approach. First, a backbone model is trained to estimate the irradiance from all-sky imager (ASI) images. The model is then extended and retrained on image and parameter sequences for forecasting. An open access data set is used for training and evaluation. We investigated the impact of simultaneously considering global horizontal (GHI), direct normal (DNI), and diffuse horizontal irradiance (DHI) on training time and forecast performance as well as the effect of adding parameters describing the irradiance variability proposed in the literature. The backbone model estimates current GHI with an RMSE and MAE of 58.06 and 29.33 W m−2, respectively. When extended for forecasting, the model achieves an overall positive skill score reaching 18.6 % compared to a smart persistence forecast. Minor modifications to the deterministic backbone and forecasting models enables the architecture to output an asymmetrical probability distribution and reduces training time while leading to similar errors for the backbone models. Investigating the impact of variability parameters shows that they reduce training time but have no significant impact on the GHI forecasting performance for both deterministic and probabilistic forecasting while simultaneously forecasting GHI, DNI, and DHI reduces the forecast performance.
Integrating physical simulation data into data ecosystems challenges the compatibility and interoperability of data management tools. Semantic web technologies and relational databases mostly use other data types, such as measurement or manufacturing design data. Standardizing simulation data storage and harmonizing the data structures with other domains is still a challenge, as current standards such as the ISO standard STEP (ISO 10303 ”Standard for the Exchange of Product model data”) fail to bridge the gap between design and simulation data. This challenge requires new methods, such as ontologies, to rethink simulation results integration. This research describes a new software architecture and application methodology based on the industrial standard ”Virtual Material Modelling in Manufacturing” (VMAP). The architecture integrates large quantities of structured simulation data and their analyses into a semantic data structure. It is capable of providing data permeability from the global digital twin level to the detailed numerical values of data entries and even new key indicators in a three-step approach: It represents a file as an instance in a knowledge graph, queries the file’s metadata, and finds a semantically represented process that enables new metadata to be created and instantiated.
Accurate forecasting of solar irradiance is crucial for the integration of solar energy into the power grid, power system planning, and the operation of solar power plants. The Weather Research and Forecasting (WRF) model, with its solar radiation (WRF-Solar) extension, has been used to forecast solar irradiance in various regions worldwide. However, the application of the WRF-Solar model for global horizontal irradiance (GHI) forecasting in West Africa, specifically in Ghana, has not been studied. This study aims to evaluate the performance of the WRF-Solar model for GHI forecasting in Ghana, focusing on 3 health centers (Kologo, Kumasi and Akwatia) for the year 2021. We applied a two one-way nested domain (D1=15 km and D2=3 km) to investigate the ability of the WRF solar model to forecast GHI up to 72 hours in advance under different atmospheric conditions. The initial and lateral boundary conditions were taken from the ECMWF operational forecasts. In addition, the optical aerosol depth (AOD) data at 550 nm from the Copernicus Atmosphere Monitoring Service (CAMS) were considered. The study uses statistical metrics such as mean bias error (MBE), root mean square error (RMSE), to evaluate the performance of the WRF-Solar model with the observational data obtained from automatic weather stations in the three health centers in Ghana. The results of this study will contribute to the understanding of the capabilities and limitations of the WRF-Solar model for forecasting GHI in West Africa, particularly in Ghana, and provide valuable information for stakeholders involved in solar energy generation and grid integration towards optimized management of in the region.
Striated muscle contraction is regulated by the translocation of troponin-tropomyosin strands over the thin filament surface. Relaxation relies partly on highly-favorable, conformation-dependent electrostatic contacts between actin and tropomyosin, which position tropomyosin such that it impedes actomyosin associations. Impaired relaxation and hypercontractile properties are hallmarks of various muscle disorders. The α-cardiac actin M305L hypertrophic cardiomyopathy-causing mutation lies near residues that help confine tropomyosin to an inhibitory position along thin filaments. Here, we investigate M305L actin in vivo, in vitro, and in silico to resolve emergent pathological properties and disease mechanisms. Our data suggest the mutation reduces actin flexibility and distorts the actin-tropomyosin electrostatic energy landscape that, in muscle, result in aberrant contractile inhibition and excessive force. Thus, actin flexibility may be required to establish and maintain interfacial contacts with tropomyosin as well as facilitate its movement over distinct actin surface features and is, therefore, likely necessary for proper regulation of contraction.
A Fourier scatterometry setup is evaluated to recover the key parameters of optical phase gratings. Based on these parameters, systematic errors in the printing process of two-photon polymerization (TPP) gray-scale lithography three-dimensional printers can be compensated, namely tilt and curvature deviations. The proposed setup is significantly cheaper than a confocal microscope, which is usually used to determine calibration parameters for compensation of the TPP printing process. The grating parameters recovered this way are compared to those obtained with a confocal microscope. A clear correlation between confocal and scatterometric measurements is first shown for structures containing either tilt or curvature. The correlation is also shown for structures containing a mixture of tilt and curvature errors (squared Pearson coefficient r2 = 0.92). This compensation method is demonstrated on a TPP printer: a diffractive optical element printed with correction parameters obtained from Fourier scatterometry shows a significant reduction in noise as compared to the uncompensated system. This verifies the successful reduction of tilt and curvature errors. Further improvements of the method are proposed, which may enable the measurements to become more precise than confocal measurements in the future, since scatterometry is not affected by the diffraction limit.
Solar photovoltaic power output is modulated by atmospheric aerosols and clouds and thus contains valuable information on the optical properties of the atmosphere. As a ground-based data source with high spatiotemporal resolution it has great potential to complement other ground-based solar irradiance measurements as well as those of weather models and satellites, thus leading to an improved characterisation of global horizontal irradiance. In this work several algorithms are presented that can retrieve global tilted and horizontal irradiance and atmospheric optical properties from solar photovoltaic data and/or pyranometer measurements. The method is tested on data from two measurement campaigns that took place in the Allgäu region in Germany in autumn 2018 and summer 2019, and the results are compared with local pyranometer measurements as well as satellite and weather model data. Using power data measured at 1 Hz and averaged to 1 min resolution along with a non-linear photovoltaic module temperature model, global horizontal irradiance is extracted with a mean bias error compared to concurrent pyranometer measurements of 5.79 W m−2 (7.35 W m−2) under clear (cloudy) skies, averaged over the two campaigns, whereas for the retrieval using coarser 15 min power data with a linear temperature model the mean bias error is 5.88 and 41.87 W m−2 under clear and cloudy skies, respectively.
During completely overcast periods the cloud optical depth is extracted from photovoltaic power using a lookup table method based on a 1D radiative transfer simulation, and the results are compared to both satellite retrievals and data from the Consortium for Small-scale Modelling (COSMO) weather model. Potential applications of this approach for extracting cloud optical properties are discussed, as well as certain limitations, such as the representation of 3D radiative effects that occur under broken-cloud conditions. In principle this method could provide an unprecedented amount of ground-based data on both irradiance and optical properties of the atmosphere, as long as the required photovoltaic power data are available and properly pre-screened to remove unwanted artefacts in the signal. Possible solutions to this problem are discussed in the context of future work.