Refine
Department, Institute
Document Type
- Conference Object (38)
- Article (6)
- Preprint (4)
- Part of a Book (3)
- Report (3)
Year of publication
Keywords
- Automatic Short Answer Grading (2)
- Cognitive robot control (2)
- Drosophila (2)
- Navigation (2)
- robotics (2)
- Active Learning (1)
- BERT (1)
- Ball Tracking (1)
- Ball tracking (1)
- Benchmarking (1)
CASTLE is a co-design platform developed at GMD SET institute. It provides a number of design tools for configuring application specific design flows. This paper presents a walk through the CASTLE co-design environment, following the design flow of a video processing system. The design methodology and the tool usage for this real life example are described, as seen from a designers point of view. The design flow starts with a C/C++ program and gradually derives a register-transfer level description of a processor hardware, as well as the corresponding compiler for generating the processor opcode. The main results of each design step are presented and the usage of the CASTLE tools at each step is explained.
Ein gebräuchliche Methodik beim Entwurf eingebetteter Systeme, in Anwendung besonders bei kleinen- und mittleren Unternehmen, geht folgendermaßen vor: Man nehme das bereits existierende Mikrokontroller Entwicklungspaket und bereits vorhandene Funktionen aus einer alten Systemrealisierung, variiere bzw. passe sie an die neue Aufgabe an und teste dann durch Emulation, ob die Spezifikation erfüllt ist.
Co-design is concerned with the joint design of hardware and software making up an embedded computer system [Wol94]. A top down design flow for an embedded system begins with a system specification. If it is executable, it may be used for simulation, system verification or to identify algorithmical bottlenecks. In contrast to other chapters of this book, the specification is not developed in this case study, rather it is given from the beginning. Furthermore we are not concerned with partitioning or synthesis of dedicated HW. Instead we focus on the problem how to find an off-the-shelf micro-controller which implements the desired functionality and meets all specification constraints. If feasible, this is usually much cheaper then using dedicated hardware. This chapter will answer the question of feasibility for a real life problem from automobile industry.
Cognitive robotics aims at understanding biological processes, though it has also the potential to improve future robotics systems. Here we show how a biologically inspired model of motor control with neural fields can be augmented with additional components such that it is able to solve a basic robotics task, that of obstacle avoidance. While obstacle avoidance is a well researched area, the focus here is on the extensibility of a biologically inspired framework. This work demonstrates how easily the biological inspired system can be used to adapt to new tasks. This flexibility is thought to be a major hallmark of biological agents.
With regard to performance well established SW-only design methodologies proceed by making the initial specification run first, then by enhancing its functionality and finally by optimizing it. When designing Embedded Systems (EbS) this approach is not viable since decisive design decisions like e.g. the estimation of required processing power or the identification of those parts of the specification which need to be delegated to dedicated HW depend on the fastness and fairness of the initial specification. We here propose a sequence of optimization steps embedded into the design flow, which enables a structured way to accelerate a given working EbS specification at different layers. This sequence of accelerations comprises algorithm selection, algorithm transformation, data transformation, implementation optimization and finally HW acceleration. It is analyzed how all acceleration steps are influenced by the specific attributes of the underlying EbS. The overall acceleration procedure is explained and quantified at hand of a real-life industrial example.
We describe the development of an architecture for the DESIRE technology demonstrator based on principles of classical component based software engineering. The architecture is directly derived from the project requirements and resides on the concept of an Autonomous Component utilizing a smart feedback value called WishLists. This return type is able to provide expert advice about the reasons of occurring failures and give hints for possible recovery strategies. This is of key importance to advance towards robustness. The integration of an AI task planner allows the realization of higher flexibility, dependability and capability during task execution and may resolve conflicts between occurring WishLists. Furthermore the necessity of a central system-state model (Eigenmodel), which represents the current state and configuration of the whole system at runtime, is explained and illustrated. We conclude with some lessons learned.
A way of combining a relatively new sensor-technology, that is optical analog VLSI devices, with a standard digital omni-directional vision system is investigated. The sensor used is a neuromorphic analog VLSI sensor that estimates the global visual image motion. The sensor provides two analog output voltages that represent the components of the global optical flow vector. The readout is guided by an omni-directional mirror that maps the location of the ball and directs the robot to align its position so that a sensor-actuator module that includes the analog VLSI optical flow sensor can be activated. The purpose of the sensor-actuator module is to operate with a higher update rate than the standard vision system and thus increase the reactivity of the robot for very specific situations. This paper will demonstrate an application example where the robot is a goalkeeper with the task of defending the goal during a penalty kick.
The ability to track moving people is a key aspect of autonomous robot systems in real-world environments. Whilst for many tasks knowing the approximate positions of people may be sufficient, the ability to identify unique people is needed to accurately count people in the real world. To accomplish the people counting task, a robust system for people detection, tracking and identification is needed.
Swedish wheeled mobile robots have remarkable mobility properties allowing them to rotate and translate at the same time. Being holonomic systems, their kinematics model results in the possibility of designing separate and independent position and heading trajectory tracking control laws. Nevertheless, if these control laws should be implemented in the presence of unaccounted actuator saturation, the resulting saturated linear and angular velocity commands could interfere with each other thus dramatically affecting the overall expected performance. Based on Lyapunov’s direct method, a position and heading trajectory tracking control law for Swedish wheeled robots is developed. It explicitly accounts for actuator saturation by using ideas from a prioritized task based control framework.
The goal of this work is to develop an integration framework for a robotic software system which enables robotic learning by experimentation within a distributed and heterogeneous setting. To meet this challenge, the authors specified, defined, developed, implemented and tested a component-based architecture called XPERSIF. The architecture comprises loosely-coupled, autonomous components that offer services through their well-defined interfaces and form a service-oriented architecture. The Ice middleware is used in the communication layer. Additionally, the successful integration of the XPERSim simulator into the system has enabled simultaneous quasi-realtime observation of the simulation by numerous, distributed users.
While executing actions, service robots may experience external faults because of insufficient knowledge about the actions' preconditions. The possibility of encountering such faults can be minimised if symbolic and geometric precondition models are combined into a representation that specifies how and where actions should be executed. This work investigates the problem of learning such action execution models and the manner in which those models can be generalised. In particular, we develop a template-based representation of execution models, which we call delta models, and describe how symbolic template representations and geometric success probability distributions can be combined for generalising the templates beyond the problem instances on which they are created. Our experimental analysis, which is performed with two physical robot platforms, shows that delta models can describe execution-specific knowledge reliably, thus serving as a viable model for avoiding the occurrence of external faults.
In the field of domestic service robots, recovery from faults is crucial to promote user acceptance. In this context we focus in particular on some specific faults, which arise from the interaction of a robot with its real world environment. Even a well-modelled robot may fail to perform its tasks successfully due to unexpected situations, which occur while interacting. These situations occur as deviations of properties of the objects (manipulated by the robot) from their expected values. Hence, they are experienced by the robot as external faults.
Improving Robustness of Task Execution Against External Faults Using Simulation Based Approach
(2013)
Robots interacting in complex and cluttered environments may face unexpected situations referred to as external faults which prohibit the successful completion of their tasks. In order to function in a more robust manner, robots need to recognise these faults and learn how to deal with them in the future. We present a simulation-based technique to avoid external faults occurring during execusion releasing actions of a robot. Our technique utilizes simulation to generate a set of labeled examples which are used by a histogram algorithm to compute a safe region. A safe region consists of a set of releasing states of an object that correspond to successful performances of the action. This technique also suggests a general solution to avoid the occurrence of external faults for not only the current, observable object but also for any other object of the same shape but different size.
Unexpected Situations in Service Robot Environment: Classification and Reasoning Using Naive Physics
(2014)
Despite perfect functioning of its internal components, a robot can be unsuccessful in performing its tasks because of unforeseen situations. Mostly these situations arise from the interaction of a robot with its ever-changing environment. In this paper we refer to these unsuccessful operations as external unknown faults. We reason along the most frequent failures in typical scenarios which we observed during real-world demonstrations and competitions using our Care-O-bot III robot. These events take place in an apartment-like environment.
Robots, which are able to carry out their tasks robustly in real world environments, are not only desirable but necessary if we want them to be more welcome for a wider audience. But very often they may fail to execute their actions successfully because of insufficient information about behaviour of objects used in the actions.
Vision-based motion detection, an important skill for an autonomous mobile robot operating in dynamic environments, is particularly challenging when the robot's camera is in motion. In this paper, we use a Fourier-Mellin transform-based image registration method to compensate for camera motion before applying temporal differencing for motion detection. The approach is evaluated online as well as offline on a set of sequences recorded with a Care-O-bot 3, and compared with a feature-based method for image registration. In comparison to the feature-based method, our method performs better both in terms of robustness of the registration and the false discovery rate.
