Refine
Departments, institutes and facilities
Document Type
- Conference Object (11) (remove)
Language
- English (11)
Has Fulltext
- no (11)
Keywords
- Receivers (3)
- Equipment and services (2)
- Fourier transforms (2)
- Heterodyning (2)
- Optics (2)
- Oscillators (2)
- Sensors (2)
- Spectrometers (2)
- Telescopes (2)
- Astronomy (1)
To make best use of the exceptional good weather conditions at Chajnantor we developed CHAMP+, a two time seven pixel dual-color heterodyne array for operation in the 350 and 450 µm atmospheric windows. CHAMP+ uses state-of-the-art SIS-mixers provided by our collaborators at SRON. To maximize its performance, optical single sideband filter are implemented for each of the two subarrays, and most of the optics is operated cold (20K) to minimize noise contributions. The instrument can be operated remotely, under full computer control of all components. The autocorrelator backend, currently in operation with 2 × 1GHz of bandwidth for each of the 14 heterodyne channels, will be upgraded by a new technologies FFT spectrometer array in mid 2008. CHAMP+ has been commissioned successfully in late 2007. We will review the performance of the instrument "in the field," and present its characteristics as measured on-sky.
Kinetic Inductance Detectors with Integrated Antennas for Ground and Space-Based Sub-mm Astronomy
(2009)
Very large arrays of Microwave Kinetic Inductance Detectors (MKIDs) have the potential to revolutionize ground and space based astronomy. They can offer in excess of 10.000 pixels with large dynamic range and very high sensitivity in combination with very efficient frequency division multiplexing at GHz frequencies. In this paper we present the development of a 400 pixel MKID demonstration array, including optical coupling, sensitivity measurements, beam pattern measurements and readout. The design presented can be scaled to any frequency between 80 GHz and >5 THz because there is no need for superconducting structures that become lossy at frequencies above the gap frequency of the materials used. The latter would limit the frequency coverage to below 1 THz for relatively high gap materials such as NbTiN. An individual pixels of the array consist of a distributed Aluminium CPW MKID with an integrated twin slot antenna at its end. The antenna is placed in the in the second focus of an elliptical high purity Si lens. The lens-antenna coupling design allows room for the MKID resonator outside of the focal point of the lens. The best dark noise equivalent power of these devices is measured to be NEP = 7×10-19 W/[square root]Hz and the optical coupling efficiency is around 30%, in which no antireflection coating was used on the Si lens. For the readout we use a commercial arbitrary waveform generator and a 1.5 GHz FFTS. We show that using this concept it is possible to read out in excess of 400 pixels with 1 board and 1 pair of coaxial cables.
Radio pulsars in relativistic binary systems are unique tools to study the curved space-time around massive compact objects. The discovery of a pulsar closely orbiting the super-massive black hole at the centre of our Galaxy, Sgr A⋆, would provide a superb test-bed for gravitational physics. To date, the absence of any radio pulsar discoveries within a few arc minutes of Sgr A⋆ has been explained by one principal factor: extreme scattering of radio waves caused by inhomogeneities in the ionized component of the interstellar medium in the central 100 pc around Sgr A⋆. Scattering, which causes temporal broadening of pulses, can only be mitigated by observing at higher frequencies. Here we describe recent searches of the Galactic centre region performed at a frequency of 18.95 GHz with the Effelsberg radio telescope.
We report the status of a search for pulsars in the Galactic Centre, using a completely revised and improved high-sensitivity doublehorn system at 4.85-GHz. We also present calculations about the success rate of periodicity searches for such a survey, showing that in contrast to conclusions in recent literature pulsars can be indeed detected at the chosen search frequency.
Introduction: After cellulose, lignin represents the most abundant biopolymer on earth that accounts for up to 18-35 % by weight of lignocellulose biomass. Today, it is a by-product of the paper and pulping industry. Although lignin is available in huge amounts, mainly in form of so called black liquor produced via Kraft-pulping, processes for the valorization of lignin are still limited [1]. Due to its hyperbranched polyphenol-like structure, lignin gained increasing interest as biobased building block for polymer synthesis [2]. The present work is focused on extraction and purification of lignin from industrial black liquor and synthesis of lignin-based polyurethanes.