Refine
Departments, institutes and facilities
Document Type
- Conference Object (48)
- Article (6)
- Doctoral Thesis (1)
- Report (1)
Year of publication
Language
- English (56) (remove)
Keywords
- WiLD (3)
- 802.11 (2)
- IEEE 802.11 (2)
- IEEE802.11 (2)
- LoRa (2)
- Long-Distance WiFi (2)
- OpenFlow (2)
- WiFi (2)
- Customization (1)
- Directional Antenna (1)
Multipoint data-communications is among the hot topics of communication research and development. A lot of studies and ideas have been presented, the vast majority focusing on a homogenous environment in terms of physical network, communication protocol stacks, coding schemes and/or service qualities. First straight-forward implementations –Steve Deering‘s IP multipoint on the MBone being the most popular one– already give an idea of the capabilities of a multipoint environment.
The MoMoSat service will enable mobile end-users to view, manage, annotate, and communicate mapbased information in the field. The handled information exists of a huge volume of raster (satellite or aerial images) and vector data (i.e. street networks, cadastral maps or points of interest), as well as text-specific geo-referenced textual notes (the so-called 'GeoNotes') and real-time voice.
WiFi-based Long Distance (WiLD) networks have emerged as a promising alternative approach for Internet in rural areas. The main hardware components of these networks are commercial off-the-shelf WiFi radios and directional antennas. During our experiences with real-world WiLD networks, we encountered that interference among long-distance links is a major issue even with high gain directional antennas. In this work, we are providing an in-depth analysis of these interference effects by conducting simulations in ns-3. To closely match the real-world interference effects, we implemented a module to load radiation pattern of commonly used antennas. We analyze two different interference scenarios typically present as a part of larger networks. The results show that side-lobes of directional antennas significantly influence the throughput of long-distance WiFi links depending on the orientation. This work emphasizes that the usage of simple directional antenna models needs to be considered carefully.
Three emerging technologies are combined in a setup that has been installed and tested at GMD - the German National Research Center for Information Technology: 1. Multimedia Telecooperation Applications; 2. ATM-based high-speed networks; 3. Satellite links. The results are promising: After some initial problems, the complete scenario is up and running, allowing the interconnection of local high-speed infrastructures in rural areas to a core network via satellite. This paper describes the R&D background and state- of-the-art that led us to this approach. It then describes the communication infrastructure and the application infra- structure of the setup, the problems we had and the solu- tions we found. Finally, our experiences are summarized, and an outlook is made for future implementations.
Influence of priorities on the performance of a fast packet switch in the case of bursty traffic
(1992)
Filling the Pipe
(1995)
An Information on Demand teleservice that was developed at the German National Research Center for Information Technology (GMD) provides remote access to multimedia information consisting of audio, video, and text [jonas et al. 94]. It uses a bidirectional narrowband message link between the end user and the service provider, and a unidirectional broadband data link from the service provider to the end user. Since the IoD teleservice is used across a satellite connection (among others), it turned out to be necessary to implement an access protocol that is optimized for the access of real-time multimedia data across a long-delay high-bandwidth link, a long fat pipe [jacobsen et al. 92]. This paper introduces the MediaService Protocol (MSP) and describes a prototype implementation (version 0.6).
SDN and WMN evolved to be sophisticated technologies used in a variety of applications. However, a combined approach called wmSDN has not been widely addressed in the research community. Our idea in this field consists of WiFi-based point-to-point links managed by the OpenFlow protocol. We investigate two different issues regarding this idea. First, which WiFi operational mode is suitable in an OpenFlow managed broadcast domain? Second, does the performance decrease compared with other routing or switching principles? Therefore, we set up a real-world testbed and a suitable simulation environment. Unlike previous work, we show that it is possible to use WiFi links without conducting MAC address rewriting at each hop by utilizing the 4-address-mode.
WiFi-based Long Distance (WiLD) networks have emerged as a promising alternative technology approach for providing Internet in rural areas. An important factor in network planning of these wireless networks is estimating the path loss. In this work, we present various propagation models we found suitable for point-to-point (P2P) operation in the WiFi frequency bands. We conducted outdoor experiments with commercial offthe- shelf (COTS) hardware in our testbed made of 7 different long-distance links ranging from 450 m to 10.3 km and a mobile measurement station. We found that for short links with omni-directional antennas ground-reflection is a measurable phenomenon. For longer links, we show that either FSPL or the Longley-Rice model provides accurate results for certain links. We conclude that a good site survey is needed to exclude influences not included in the propagation models.
With the rapid advances in multimedia content delivery technologies, there is an increasing challenge for efficient Quality of Service (QoS) based multicast transport in mobile Internet environment. This paper discusses architectural approach for provision of multicast services in heterogeneous mobile IPv6 environment using context transfer. Following issues of QoS based mobile multicast transport are addressed: - Application of context transfer between access routers for seamless handover of active multicast services; - Adaptation of multicast group management and routing designed for wired IPv6 infrastructures to heterogeneous mobile environment; - Candidate access router discovery and context aware user interfaces for optimised handover; - Reliable mobile multicast for content delivery supported by context transfer at access routers; - Distributed QoS management of multicast services in heterogeneous mobile environment. The work is part of the mobile architecture developed in the EU IST project DAIDALOS.
This work describes extensions to the well-known Distributed Coordination Function (DCF) model to account for IEEE802.11n point-to-point links. The developed extensions cover adaptions to the throughput and delay estimation for this type of link as well peculiarities of hardware and implementations within the Linux Kernel. Instead of using simulations, the approach was extensively verified on real-world deployments at various link distances. Additionally, trials were conducted to optimize the CWmin values and the number of retries to maximize throughput and minimize delay. The results of this work can be used to estimate the properties of long-distance 802.11 links beforehand, allowing the network to be planned more accurately.
ATM virtual studio services
(1996)
The term "virtual studio" refers to real-time 3D graphics systems used to render a virtual set in sync with live camera motion. As the camera pans and zooms, the virtual set is redrawn from the correct perspective. Using blue room techniques, actors in front of the real camera are then “placed in” the virtual set. Current virtual studio systems are centralized – the blue room, cameras, renderers etc. are located at a single site. However distributed configurations offer significant economies such as the sharing of expensive rendering equipment among many sites. This paper describes early expe- riences of the DVP1 project in the realization of a distributed virtual studio. In particular we de- scribe the first video production using a distributed virtual studio over ATM and make observations concerning network QOS requirements.
More and more devices will be connected to the internet [3]. Many devicesare part of the so-called Internet of Things (IoT) which contains many low-powerdevices often powered by a battery. These devices mainly communicate with the manufacturers back-end and deliver personal data and secrets like passwords.