Refine
H-BRS Bibliography
- yes (3)
Departments, institutes and facilities
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (3) (remove)
Document Type
Language
- English (3)
Has Fulltext
- no (3)
Keywords
- Cybersecurity (1)
- Exergame (1)
- Grid Control (1)
- Grid Stability (1)
- Information and Communication Technologies (1)
- Inverter (1)
- MOOC (1)
- collaborative learning (1)
- gamification (1)
- international teams (1)
The need for innovation around the control functions of inverters is great. PV inverters were initially expected to be passive followers of the grid and to disconnect as soon as abnormal conditions happened. Since future power systems will be dominated by generation and storage resources interfaced through inverters these converters must move from following to forming and sustaining the grid. As “digital natives” PV inverters can also play an important role in the digitalisation of distribution networks. In this short review we identified a large potential to make the PV inverter the smart local hub in a distributed energy system. At the micro level, costs and coordination can be improved with bidirectional inverters between the AC grid and PV production, stationary storage, car chargers and DC loads. At the macro level the distributed nature of PV generation means that the same devices will support both to the local distribution network and to the global stability of the grid. Much success has been obtained in the former. The later remains a challenge, in particular in terms of scaling. Yet there is some urgency in researching and demonstrating such solutions. And while digitalisation offers promise in all control aspects it also raises significant cybersecurity concerns.
The proper use of protective hoods on panel saws should reliably prevent severe injuries from (hand) contact with the blade or material kickbacks. It also should minimize long-term lung damages from fine-particle pollution. To achieve both purposes the hood must be adjusted properly by the operator for each workpiece to fit its height. After a work process is finished, the hood must be lowered down completely to the bench. Unfortunately, in practice the protective hood is fixed at a high position for most of the work time and herein loses its safety features. A system for an automatic height adjustment of the hood would increase comfort and safety. If the system can distinguish between workpieces and skin reliably, it furthermore will reduce occupational hazards for panel saw users. A functional demonstrator of such a system has been designed and implemented to show the feasibility of this approach. A specific optical sensor system is used to observe a point on the extended cut axis in front of the blade. The sensor determines the surface material reliably and measures the distance to the workpiece surface simultaneously. If the distance changes because of a workpiece fed to the machine, the control unit will set the motor-adjusted hood to the correct height. If the sensor detects skin, the hood will not be moved. In addition a camera observes the area under the hood. If there are no workpieces or offcuts left under the hood, it will be lowered back to the default position.