Refine
H-BRS Bibliography
- yes (27)
Departments, institutes and facilities
- Fachbereich Informatik (27) (remove)
Document Type
- Conference Object (15)
- Article (11)
- Part of a Book (1)
Year of publication
Language
- English (27) (remove)
Keywords
- Skin detection (2)
- automated sensor-screening (2)
- biometrics (2)
- machine learning (2)
- optical sensor (2)
- semiconducting metal oxide gas sensor array (2)
- Circular saws (1)
- Collaborating industrial robots (1)
- Embedded system (1)
- Exergame (1)
In the presented project, a new approach for the prevention of hand movements leading to hazards and for non-contact detection of fingers is intended to permit comprehensive and economical protection on circular saws. The basic principles may also be applied to other machines with manual loading and / or unloading. With an automatic blade guard an improved integration of the protection system can be achieved. In addition a new detection principle is explained. The distinction between skin and wood or other material is achieved by a dedicated spectral analysis in the near infrared region. Using LED and photodiodes it is possible to detect fingers and hands reliably. With a kind of light curtain the intrusion of hands or fingers into the dangerous zone near the blade guard can be prevented.
The simultaneous operation of multiple different semiconducting metal oxide (MOX) gas sensors is demanding for the readout circuitry. The challenge results from the strongly varying signal intensities of the various sensor types to the target gas. While some sensors change their resistance only slightly, other types can react with a resistive change over a range of several decades. Therefore, a suitable readout circuit has to be able to capture all these resistive variations, requiring it to have a very large dynamic range. This work presents a compact embedded system that provides a full, high range input interface (readout and heater management) for MOX sensor operation. The system is modular and consists of a central mainboard that holds up to eight sensor-modules, each capable of supporting up to two MOX sensors, therefore supporting a total maximum of 16 different sensors. Its wide input range is archived using the resistance-to-time measurement method. The system is solely built with commercial off-the-shelf components and tested over a range spanning from 100Ω to 5 GΩ (9.7 decades) with an average measurement error of 0.27% and a maximum error of 2.11%. The heater management uses a well-tested power-circuit and supports multiple modes of operation, hence enabling the system to be used in highly automated measurement applications. The experimental part of this work presents the results of an exemplary screening of 16 sensors, which was performed to evaluate the system’s performance.
The following work presents algorithms for semi-automatic validation, feature extraction and ranking of time series measurements acquired from MOX gas sensors. Semi-automatic measurement validation is accomplished by extending established curve similarity algorithms with a slope-based signature calculation. Furthermore, a feature-based ranking metric is introduced. It allows for individual prioritization of each feature and can be used to find the best performing sensors regarding multiple research questions. Finally, the functionality of the algorithms, as well as the developed software suite, are demonstrated with an exemplary scenario, illustrating how to find the most power-efficient MOX gas sensor in a data set collected during an extensive screening consisting of 16,320 measurements, all taken with different sensors at various temperatures and analytes.
In the presented project, new approaches for the prevention of hand movements leading to hazards and for non-contact detection of fingers are intended to permit comprehensive and economical protection on circular saws. The basic principles may also be applied to other machines with manual loading and/or unloading. Two new detection principles are explained. The first is the distinction between skin and wood or other material by spectral analysis in the near infrared region. Using LED and photodiodes it is possible to detect fingers and hands reliable. With a kind of light curtain the intrusion into the dangerous zone near the blade can be prevented. The second principle is video image processing to detect persons, arms and fingers. In the first stage of development the detection of upper limb extremities within a defined hazard area by means of a computer based video image analysis is investigated.
This paper presents recent research on an active multispectral scanning sensor capable of classifying an object's surface material in order to distinguish between different kinds of materials and human skin. The sensor itself has already been presented in previous work and can be used in conjunction with safeguarding equipment at manually-fed machines or robot workplaces, for example. This work shows how an extended sensor system with advanced material classifiers can be used to provide additional value by distinguishing different materials of work pieces in order to suggest different tools or parameters for the machine (e.g. the use of a different saw blade or rotation speed at table saws). Additionally, a first implementation and evaluation of an active multispectral camera system addressing new safety applications is described. Both approaches intend to increase the productivity and the user's acceptance of the sensor technology.
The choice of suitable semiconducting metal oxide (MOX) gas sensors for the detection of a specific gas or gas mixture is time-consuming since the sensor’s sensitivity needs to be characterized at multiple temperatures to find its optimal operating conditions. To obtain reliable measurement results, it is very important that the power for the sensor’s integrated heater is stable, regulated and error-free (or error-tolerant). Especially the error-free requirement can be only be achieved if the power supply implements failure-avoiding and failure-detection methods. The biggest challenge is deriving multiple different voltages from a common supply in an efficient way while keeping the system as small and lightweight as possible. This work presents a reliable, compact, embedded system that addresses the power supply requirements for fully automated simultaneous sensor characterization for up to 16 sensors at multiple temperatures. The system implements efficient (avg. 83.3% efficiency) voltage conversion with low ripple output (<32 mV) and supports static or temperature-cycled heating modes. Voltage and current of each channel are constantly monitored and regulated to guarantee reliable operation. To evaluate the proposed design, 16 sensors were screened. The results are shown in the experimental part of this work.
Design of an Active Multispectral SWIR Camera System for Skin Detection and Face Verification
(2016)
Biometric face recognition is becoming more frequently used in different application scenarios. However, spoofing attacks with facial disguises are still a serious problem for state of the art face recognition algorithms. This work proposes an approach to face verification based on spectral signatures of material surfaces in the short wave infrared (SWIR) range. They allow distinguishing authentic human skin reliably from other materials, independent of the skin type. We present the design of an active SWIR imaging system that acquires four-band multispectral image stacks in real-time. The system uses pulsed small band illumination, which allows for fast image acquisition and high spectral resolution and renders it widely independent of ambient light. After extracting the spectral signatures from the acquired images, detected faces can be verified or rejected by classifying the material as "skin" or "no-skin". The approach is extensively evaluated with respect to both acquisition and classification performance. In addition, we present a database containing RGB and multispectral SWIR face images, as well as spectrometer measurements of a variety of subjects, which is used to evaluate our approach and will be made available to the research community by the time this work is published.
In this paper, we introduce an optical sensor system, which is integrated into an industrial push-button. The sensor allows to classify the type of material that is in contact with the button when pressed into different material categories on the basis of the material's so called "spectral signature". An approach for a safety sensor system at circular table saws on the same base has been introduced previously on SIAS-2007. This contactless working sensor is able to distinguish reliably between skin, textiles, leather and various other kinds of materials. A typical application for this intelligent push-button is the use at possibly dangerous machines, whose operating instructions include either the prohibition or the obligation to wear gloves during the work at the machine. An exemple of machines at which no gloves are allowed are pillar drilling machines, because of the risk of getting caught in the drill chuck and being turned in by the machine. In many cases this causes very serious hand injuries. Depending on the application needs, the sensor system integrated into the push-button can be configured flexibly by software to prevent the operator from accidentally starting a machine with or without gloves, which can decrease the risk of severe accidents significantly. Especially two-hand controls are incentive to manipulation for easier handling. By equipping both push-buttons of a two-hand control with material classification properties, the user is forced to operate the controls with his bare fingers. That limitation disallows the manipulation of a two-hand control by a simple rodding device.
At previous SIAS conferences, we presented a novel opto-electronic safety sensor system for skin detection at circular saws jointly developed with the Institute for Occupational Safety and Health of the German Social Accident Insurance (IFA). This work now presents the development results of our consecutive research on a prototype of a sensor system for more general production machine applications including robot workplaces. The system uses offthe shelf LEDs and photodiodes in combination with dedicated optics and a microcontroller system to implement a so-called spectral light curtain.