Refine
H-BRS Bibliography
- yes (32)
Departments, institutes and facilities
Document Type
- Article (32) (remove)
Year of publication
Keywords
- GC/MS (6)
- Corrosion inhibitors (4)
- Primary long-chain alkyl amines (3)
- Analytical pyrolysis (2)
- Automotive industry (2)
- Chromatography (2)
- Failure analysis (2)
- GC-FID/NPD (2)
- Malaria (2)
- Styrene (2)
For the last 20 years, solid-phase microextraction (SPME) in headspace (HS) mode has been used as a valuable sample preparation technique for identifying degradation products in polymers and the determination of residual monomers and other light-boiling substances in polymeric materials. For more than 10 years, our laboratory has been involved in projects focused on the application of HS-SPME-gas chromatography–mass spectrometry (GC–MS) for the characterization of polymeric materials from many branches of manufacturing and building industries. This article describes the application of this technique for identifying volatile organic compounds (VOCs), additives, and degradation products in industrial rubber, car labeling reflection foil, and bone cement materials. The obtained analytical results were then used for troubleshooting and remedial action of the technological processes as well as for the health protection of producers and users.
The criteria for assessing the quality of rubber materials are the polymer or copolymer composition and the additives. These additives include plasticizers, extender oils, carbon black, inorganic fillers, antioxidants, heat and light stabilizers, processing aids, cross-linking agents, accelerators, retarders, adhesives, pigments, smoke and flame retardants, and others. Determination of additives in polymers or copolymers generally requires the extraction of these substances from the matrix as a first step, which can be challenging, and the subsequent analysis of the extracted additives by gas chromatography (GC), GC-mass spectrometry (MS), high performance liquid chromatography (HPLC), HPLC-MS, capillary electrophoresis, thin-layer chromatography, and other analytical techniques. In the present work, nitrile rubber materials were studied using direct analytical flash pyrolysis hyphenated to GC and electrospray ionization MS in both scan and selected ion monitoring modes to demonstrate that this technique is a good tool to identify the organic additives in nitrile rubber.
The criteria for assessing the quality of rubber materials are the polymer or copolymer composition and the additives. These additives include plasticizers, extender oils, carbon black, inorganic fillers, antioxidants, heat and light stabilizers, processing aids, cross-linking agents, accelerators, retarders, adhesives, pigments, smoke and flame retardants, and others. Determination of additives in polymers or copolymers generally requires the extraction of these substances from the matrix as a first step, which can be challenging, and the subsequent analysis of the extracted additives by gas chromatography (GC), GC–mass spectrometry (MS), high performance liquid chromatography (HPLC), HPLC–MS, capillary electrophoresis, thin-layer chromatography, and other analytical techniques. In the present work, nitrile rubber materials were studied using direct analytical flash pyrolysis hyphenated to GC and electrospray ionization MS in both scan and selected ion monitoring modes to demonstrate that this technique is a good tool to identify the organic additives in nitrile rubber.
Headspace-SPME-GC-MS identification of volatile organic compounds released from expanded polystyrene
(2004)
Die analytische Pyrolyse ist ein universelles Analysenverfahren für hochmolekulare organische Verbindungen. Unter Pyrolyse (griech.: Pyros = Feuer, Lyso = zersetzen) versteht man die chemische Umsetzung von Substanzen mittels Wärme. Bei der Pyrolyse von hochmolekularen Substanzen handelt es sich um eine thermische Zersetzung unter kontrollierten Bedingungen in niedermolekulare Verbindungen. Die niedermolekularen Pyrolyseprodukte werden dann den herkömmlichen Analysenverfahren unterworfen, welche Rückschlüsse auf chemische Zusammensetzung, Struktur und Eigenschaften der Ausgangsstoffe erlauben.
Refers To: Peter Kusch, Gerd Knupp, Marcus Hergarten, Marian Kozupa, Maria Majchrzak: Solid-phase extraction-gas chromatography and solid-phase extraction-gas chromatography–mass spectrometry determination of corrosion inhibiting long-chain primary alkyl amines in chemical treatment of boiler water in water-steam systems of power plants. - Journal of Chromatography A, Volume 1113, Issues 1–2, 28 April 2006, Pages 198-205
Balanites aegyptiaca (Balanitaceae) is a widely grown desert plant with multiuse potential. In the present paper, a crude extract from B. aegyptiaca seeds equivalent to a ratio of 1 : 2000 seeds to the extract was screened for antiplasmodial activity. The determined IC(50) value for the chloroquine-susceptible Plasmodium falciparum NF54 strain was 68.26 μg/μL ± 3.5. Analysis of the extract by gas chromatography-mass spectrometry detected 6-phenyl-2(H)-1,2,4-triazin-5-one oxime, an inhibitor of the parasitic M18 Aspartyl Aminopeptidase as one of the compounds which is responsible for the in vitro antiplasmodial activity. The crude plant extract had a K(i) of 2.35 μg/μL and showed a dose-dependent response. After depletion of the compound, a significantly lower inhibition was determined with a K(i) of 4.8 μg/μL. Moreover, two phenolic compounds, that is, 2,6-di-tert-butyl-phenol and 2,4-di-tert-butyl-phenol, with determined IC(50) values of 50.29 μM ± 3 and 47.82 μM ± 2.5, respectively, were detected. These compounds may contribute to the in vitro antimalarial activity due to their antioxidative properties. In an in vivo experiment, treatment of BALB/c mice with the aqueous Balanite extract did not lead to eradication of the parasites, although a reduced parasitemia at day 12 p.i. was observed.
Polyurethane (PU) coatings were successfully produced using unmodified kraft lignin (KL) as an environmentally benign component in contents of up to 80 wt%. Lignin samples were precipitated from industrial black liquor in aqueous solution working at room temperature and different pH levels (pH 2 to pH 5). Lignins were characterized by UV-Vis, FTIR, pyrolysis-GC/MS, SEC and 31P-NMR. Results show a correlation between pH level, OH number and molecular weight Mw of isolated lignins. Lignin-based polyurethane coatings were prepared in an efficient one step synthesis dissolving lignin in THF and PEG425 in an ultrasonic bath followed by addition of 4,4-diphenylmethanediisocyanate (MDI) and triethylamine (TEA). Crosslinking was achieved under very mild conditions (1 hour at room temperature followed by 3 hours at 35 °C). The resulting coatings were characterized regarding their physical properties including ATR-IR, TGA, optical contact angle, light microscopy, REM-EDX and AFM data. Transparent homogeneous films of high flexibility resulted from lignins isolated at pH 4, possessing a temperature resistance up to 160 °C. Swelling tests revealed a resistance against water. Swelling in DMSO depends on index, pH of precipitation and catalyst utilization for PU preparation. According to AFM studies, surface roughness is between 10 and 28 nm.
Miscanthus crops possess very attractive properties such as high photosynthesis yield and carbon fixation rate. Because of these properties, it is currently considered for use in second-generation biorefineries. Here we analyze the differences in chemical composition between M. x giganteus, a commonly studied Miscanthus genotype, and M. nagara, which is relatively understudied but has useful properties such as increased frost resistance and higher stem stability. Samples of M. x giganteus (Gig35) and M. nagara (NagG10) have been separated by plant portion (leaves and stems) in order to isolate the corresponding lignins. The organosolv process was used for biomass pulping (80% ethanol solution, 170 °C, 15 bar). Biomass composition and lignin structure analysis were performed using composition analysis, Fourier-transform infrared (FTIR), ultraviolet-visible (UV-Vis) and nuclear magnetic resonance (NMR) spectroscopy, thermogravimetric analysis (TGA), size exclusion chromatography (SEC) and pyrolysis gas-chromatography/mass spectrometry (Py-GC/MS) to determine the 3D structure of the isolated lignins, monolignol ratio and most abundant linkages depending on genotype and harvesting season. SEC data showed significant differences in the molecular weight and polydispersity indices for stem versus leaf-derived lignins. Py-GC/MS and hetero-nuclear single quantum correlation (HSQC) NMR revealed different monolignol compositions for the two genotypes (Gig35, NagG10). The monolignol ratio is slightly influenced by the time of harvest: stem-derived lignins of M. nagara showed increasing H and decreasing G unit content over the studied harvesting period (December–April).
Miscanthus x giganteus Stem Versus Leaf-Derived Lignins Differing in Monolignol Ratio and Linkage
(2019)
As a renewable, Miscanthus offers numerous advantages such as high photosynthesis activity (as a C4 plant) and an exceptional CO2 fixation rate. These properties make Miscanthus very attractive for industrial exploitation, such as lignin generation. In this paper, we present a systematic study analyzing the correlation of the lignin structure with the Miscanthus genotype and plant portion (stem versus leaf). Specifically, the ratio of the three monolignols and corresponding building blocks as well as the linkages formed between the units have been studied. The lignin amount has been determined for M. x giganteus (Gig17, Gig34, Gig35), M. nagara (NagG10), M. sinensis (Sin2), and M. robustus (Rob4) harvested at different time points (September, December, and April). The influence of the Miscanthus genotype and plant component (leaf vs. stem) has been studied to develop corresponding structure-property relationships (i.e., correlations in molecular weight, polydispersity, and decomposition temperature). Lignin isolation was performed using non-catalyzed organosolv pulping and the structure analysis includes compositional analysis, Fourier transform infradred (FTIR), ultraviolet/visible (UV-Vis), hetero-nuclear single quantum correlation nuclear magnetic resonsnce (HSQC-NMR), thermogravimetric analysis (TGA), and pyrolysis gaschromatography/mass spectrometry (GC/MS). Structural differences were found for stem and leaf-derived lignins. Compared to beech wood lignins, Miscanthus lignins possess lower molecular weight and narrow polydispersities (<1.5 Miscanthus vs. >2.5 beech) corresponding to improved homogeneity. In addition to conventional univariate analysis of FTIR spectra, multivariate chemometrics revealed distinct differences for aromatic in-plane deformations of stem versus leaf-derived lignins. These results emphasize the potential of Miscanthus as a low-input resource and a Miscanthus-derived lignin as promising agricultural feedstock.
The analytical pyrolysis technique hyphenated to gas chromatography–mass spectrometry (GC–MS) has extended the range of possible tools for the characterization of synthetic polymers and copolymers. Pyrolysis involves thermal fragmentation of the analytical sample at temperatures of 500–1400 °C. In the presence of an inert gas, reproducible decomposition products characteristic for the original polymer or copolymer sample are formed. The pyrolysis products are chromatographically separated using a fused-silica capillary column and are subsequently identified by interpretation of the obtained mass spectra or by using mass spectra libraries. The analytical technique eliminates the need for pretreatment by performing analyses directly on the solid or liquid polymer sample. In this article, application examples of analytical pyrolysis hyphenated to GC–MS for the identification of different polymeric materials in the plastic and automotive industry, dentistry, and occupational safety are demonstrated. For the first time, results of identification of commercial light-curing dental filling material and a car wrapping foil by pyrolysis–GC–MS are presented.
A method for the identification of polymeric residues in recycled aluminium by using analytical pyrolysis at 700°C hyphenated to gas chromatography-mass spectrometry (Py-GC/MS) was presented for the first time. The polymeric residues in recycled aluminium were identified as a mixture of polyethylene, polystyrene and phenolic resin. The described method could be useful for the aluminium industry as a part of the quality control of the recycled aluminium production.
Analytical pyrolysis technique hyphenated to gas chromatography/mass spectrometry (Py-GC/MS) has extended the range of possible tools for characterization of synthetic polymers/copolymers. Pyrolysis involves thermal fragmentation of the analytical sample at elevated temperature between 500 and 1400 °C. In the presence of an inert gas, reproducible decomposition products characteristic for the original polymer/copolymer sample are formed. The pyrolysis products are chromatographically separated by using a fused silica capillary column and subsequently identified by interpretation of the obtained mass spectra or by using mass spectra libraries. The analytical technique eliminate the need for pre-treatment by performing analyses directly on the solid or liquid polymer sample.
In this paper, application examples of the analytical pyrolysis hyphenated to gas chromatography/mass spectrometry for the identification of different polymeric materials in the plastic and automotive industry, dentistry and occupational safety are demonstrated. For the first time results of identification of commercially light-curing dental filling material and a car wrapping foil by pyrolysis-GC/MS are presented.
The analytical pyrolysis technique hyphenated to gas chromatography–mass spectrometry (GC–MS) has extended the range of possible tools for the characterization of synthetic polymers and copolymers. Pyrolysis involves thermal fragmentation of the analytical sample at temperatures of 500–1400 °C. In the presence of an inert gas, reproducible decomposition products characteristic for the original polymer or copolymer sample are formed. The pyrolysis products are chromatographically separated using a fused-silica capillary column and are subsequently identified by interpretation of the obtained mass spectra or by using mass spectra libraries. The analytical technique eliminates the need for pretreatment by performing analyses directly on the solid or liquid polymer sample. In this article, application examples of analytical pyrolysis hyphenated to GC–MS for the identification of different polymeric materials in the plastic and automotive industry, dentistry, and occupational safety are demonstrated. For the first time, results of identification of commercial light-curing dental filling material and a car wrapping foil by pyrolysis–GC–MS are presented.