Refine
H-BRS Bibliography
- yes (34)
Departments, institutes and facilities
Document Type
- Article (16)
- Conference Object (12)
- Book (monograph, edited volume) (4)
- Part of a Book (2)
Year of publication
Language
- English (34)
Keywords
BGML - a novel XML format for the exchange and the reuse of bond graph models of engineering systems
(2006)
The paper proposes a bond graph approach to model based fault detection and isolation (FDI) that uses residual sinks. These elements couple a reference model of a process engineering system to a bond graph model of the system that is subject to disturbances caused by faults. In this paper it is assumed that two faults do not appear simultaneously. The underlying mathematical model is a Differential Algebraic Equations (DAE) system. The approach is illustrated by means of the often used hydraulic two tanks system.
Bond graph modelling
(2006)
In this paper, residual sinks are used in bond graph model-based quantitative fault detection for the coupling of a model of a faultless process engineering system to a bond graph model of the faulty system. By this way, integral causality can be used as the preferred computational causality in both models. There is no need for numerical differentiation. Furthermore, unknown variables do not need to be eliminated from power continuity equations in order to obtain analytical redundancy relations (ARRs) in symbolic form. Residuals indicating faults are computed numerically as components of a descriptor vector of a differential algebraic equation system derived from the coupled bond graphs. The presented bond graph approach especially aims at models with non-linearities that make it cumbersome or even impossible to derive ARRs from model equations by elimination of unknown variables. For illustration, the approach is applied to a non-controlled as well as to a controlled hydraulic two-tank system. Finally, it is shown that not only the numerical computation of residuals but also the simultaneous numerical computation of their sensitivities with respect to a parameter can be supported by bond graph modelling.
A bond graph representation of switching devices known for a long time has been a modulated transformer with a modulus b(t)∈{0,1}∀t≥0 in conjunction with a resistor R:Ron accounting for the ON-resistance of a switch considered non-ideal. Besides other representations, this simple model has been used in bond graphs for simulation of the dynamic behaviour of hybrid systems. A previous article of the author has proposed to use the transformer–resistor pair in bond graphs for fault diagnosis in hybrid systems. Advantages are a unique bond graph for all system modes, the application of the unmodified standard Sequential Causality Assignment Procedure, fixed computational causalities and the derivation of analytical redundancy relations incorporating ‘Boolean’ transformer moduli so that they hold for all system modes. Switches temporarily connect and disconnect model parts. As a result, some independent storage elements may temporarily become dependent, so that the number of state variables is not time-invariant. This article addresses this problem in the context of modelling and simulation of fault scenarios in hybrid systems. In order to keep time-invariant preferred integral causality at storage ports, residual sinks previously introduced by the author are used. When two storage elements become dependent at a switching time instance ts, a residual sink is activated. It enforces that the outputs of two dependent storage elements become immediately equal by imposing the conjugate3 power variable of appropriate value on their inputs. The approach is illustrated by the bond graph modelling and simulation of some fault scenarios in a standard three-phase switched power inverter supplying power into an RL-load in a delta configuration. A well-developed approach to model-based fault detection and isolation is to evaluate the residual of analytical redundancy relations. In this article, analytical redundancy relation residuals have been computed numerically by coupling a bond graph of the faulty system to one of the non-faulty systems by means of residual sinks. The presented approach is not confined to power electronic systems but can be used for hybrid systems in other domains as well. In further work, the RL-load may be replaced by a bond graph model of an alternating current motor in order to study the effect of switch failures in the power inverter on to the dynamic behaviour of the motor.
For the case when the abstraction of instantaneous state transitions is adopted, this paper proposes to start fault detection and isolation in an engineering system from a single time-invariant causality bond graph representation of a hybrid model. To that end, the paper picks up on a long-known proposal to model switching devices by a transformer modulated by a Boolean variable and a resistor in fixed conductance causality accounting for its ON resistance. Bond graph representations of hybrid system models developed in this way have been used so far mainly for the purpose of simulation. The paper shows that they can well constitute an approach to the bond-graph-based quantitative fault detection and isolation of hybrid models. Advantages are that the standard sequential causality assignment procedure can be a used without modification. A single set of analytical redundancy relations valid for all physically feasible system modes can be (automatically) derived from the bond graph. Stiff model equations due to small values of the ON resistance in the switch model may be avoided by symbolic reformulation of equations and letting the ON resistance of some switches tend to zero, turning them into ideal switches.
First, for two examples considered in the literature, it is shown that the approach proposed in this paper can produce the same analytical redundancy relations as were obtained from a hybrid bond graph with controlled junctions and the use of a sequential causality assignment procedure especially for fault detection and isolation purpose. Moreover, the usefulness of the proposed approach is illustrated in two case studies by its application to standard switching circuits extensively used in power electronic systems and by simulation of some fault scenarios. The approach, however, is not confined to the fault detection and isolation of such systems. Analytically validated simulation results obtained by means of the program Scilab give confidence in the approach.
Hybrid system models exploit the modelling abstraction that fast state transitions take place instantaneously so that they encompass discrete events and the continuous time behaviour for the while of a system mode. If a system is in a certain mode, e.g. two rigid bodies stick together, then residuals of analytical redundancy relations (ARRs) within certain small bounds indicate that the system is healthy. An unobserved mode change, however, invalidates the current model for the dynamic behaviour. As a result, ARR residuals may exceed current thresholds indicating faults in system components that have not happened. The paper shows that ARR residuals derived from a bond graph cannot only serve as fault indicators but may also be used for bond graph model-based system mode identification. ARR residuals are numerically computed in an off-line simulation by coupling a bond graph of the faulty system to a non-faulty system bond graph through residual sinks. In real-time simulation, the faulty system model is to be replaced by measurements from the real system. As parameter values are uncertain, it is important to determine adaptive ARR thresholds that, given uncertain parameters, allow to decide whether the dynamic behaviour in a current system mode is the one of the healthy system so that false alarms or overlooking of true faults can be avoided. The paper shows how incremental bond graphs can be used to determine adaptive mode-dependent ARR thresholds for switched linear time-invariant systems with uncertain parameters in order to support robust fault detection. Bond graph-based hybrid system mode identification as well as the determination of adaptive fault thresholds is illustrated by application to a power electronic system easy to survey. Some simulation results have been analytically validated.
This book presents bond graph model-based fault detection with a focus on hybrid system models. The book addresses model design, simulation, control and model-based fault diagnosis of multidisciplinary engineering systems. The text beings with a brief survey of the state-of-the-art, then focuses on hybrid systems. The author then uses different bond graph approaches throughout the text and provides case studies.
Switched power electronic subsystems are widely used in various applications. A fault in one of their components may have a significant effect on the system’s load or may even cause a damage. Therefore, it is important to detect and isolate faults and to report true faults to a supervisory system in order to avoid malfunction of or damage to a load. If, in a model-based approach to fault detection and isolation of hybrid systems, switching devices are considered as ideal switches then some equations must be reformulated whenever some devices have switched. In this paper, a fixed causality bond graph representation of hybrid system models is used, i.e., computational causalities assigned according to the Standard Causality Assignment Procedure (SCAP) are independent of system modes of operation. The latter are taken into account by transformer moduli mi(t) ∈ {0, 1} ∀t ≥ 0 in a unique set of equations of motion. In a case study, this approach is used for fault diagnosis in a three-phase full-wave rectifier. Residuals of Analytical Redundancy Relations (ARRs) holding for all modes of operations and serving as fault indicators are computed in an offline simulation as part of a DAE system by using a bond graph model of the faulty system instead of the real one and by coupling it to a bond graph of the healthy system by means of residual sinks.
Bond Graph Modelling and Simulation of Mechatronic Systems: An Introduction into the Methodology
(2006)
This paper introduces into a graphical, computer aided modelling methodology that is particularly suited for the concurrent design of mechatronic systems, viz. of engineering systems with mechanical, electrical, hydraulic or pneumatic components including interactions of physical effects from various energy domains. Beyond the introduction, bond graph modelling of multibody systems, as an example of an advanced topic, is briefly addressed in order to demonstrate the potential of this powerful approach to modelling mechatronic systems. It is outlined how models of multibody systems including flexible bodies can be build in a systematic manner.
Integrating Bond Graph-Based Fault Diagnosis and Fault Accommodation Through Inverse Simulation
(2017)
Incremental Bond Graphs
(2011)
Analytical redundancy relations are fundamental in model-based fault detection and isolation. Their numerical evaluation yields a residual that may serve as a fault indicator. Considering switching linear time-invariant system models that use ideal switches, it is shown that analytical redundancy relations can be systematically deduced from a diagnostic bond graph with fixed causalities that hold for all modes of operation. Moreover, as to a faultless system, the presented bond graph–based approach enables to deduce a unique implicit state equation with coefficients that are functions of the discrete switch states. Devices or phenomena with fast state transitions, for example, electronic diodes and transistors, clutches, or hard mechanical stops are often represented by ideal switches which give rise to variable causalities. However, in the presented approach, fixed causalities are assigned only once to a diagnostic bond graph. That is, causal strokes at switch ports in the diagnostic bond graph reflect only the switch-state configuration in a specific system mode. The actual discrete switch states are implicitly taken into account by the discrete values of the switch moduli. The presented approach starts from a diagnostic bond graph with fixed causalities and from a partitioning of the bond graph junction structure and systematically deduces a set of equations that determines the wanted residuals. Elimination steps result in analytical redundancy relations in which the states of the storage elements and the outputs of the ideal switches are unknowns. For the later two unknowns, the approach produces an implicit differential algebraic equations system. For illustration of the general matrix-based approach, an electromechanical system and two small electronic circuits are considered. Their equations are directly derived from a diagnostic bond graph by following causal paths and are reformulated so that they conform with the matrix equations obtained by the formal approach based on a partitioning of the bond graph junction structure. For one of the three mode-switching examples, a fault scenario has been simulated.
This textbook presents an in-depth introductory survey of several fundamental advanced control concepts and techniques all ranging from modern ideas. The book emphasizes ideas, an understanding of key concepts, methodologies, and results. In line with this, the book addresses master’s students in the overlap of engineering and computer science as well as engineers working in various application fields and interested in useful control techniques and less in system theories appealing from a mathematical point of view.
Bond graph software can simulate bond graph models without the user needing to manually derive equations. This offers the power to model larger and more complex systems than in the past. Multibond graphs (those with vector bonds) offer a compact model which further eases handling multibody systems. Although multibond graphs can be simulated successfully, the use of vector bonds can present difficulties. In addition, most qualitative, bond graph–based exploitation relies on the use of scalar bonds. This article discusses the main methods for simulating bond graphs of multibody systems, using a graphical software platform. The transformation between models with vector and scalar bonds is presented. The methods are then compared with respect to both time and accuracy, through simulation of two benchmark models. This article is a tutorial on the existing methods for simulating three-dimensional rigid and holonomic multibody systems using bond graphs and discusses the difficulties encountered. It then proposes and adapts methods for simulating this type of system directly from its bond graph within a software package. The value of this study is in giving practical guidance to modellers, so that they can implement the adapted method in software.
This paper picks up on one of the ways reported in the literature to represent hybrid models of engineering systems by bond graphs with static causalities. The representation of a switching device by means of a modulated transformer (MTF) controlled by a Boolean variable in conjunction with a resistor has been used so far to build a model for simulation. In this paper, it is shown that it can also constitute an approach to bond graph based quantitative fault detection and isolation in hybrid system models. Advantages are that Analytical Redundancy Relations (ARRs) do not need to be derived again after a switch state has changed. ARRs obtained from the bond graph are valid for all system modes. Furthermore, no adaption of the standard sequential causality assignment procedure (SCAP) with respect to fault detection and isolation (FDI) is needed.
This paper proposes a novel approach to the generation of state equations from a bond graph (BG) of a mode switching linear time invariant model. Fast state transitions are modelled by ideal or non-ideal switches. Fixed causalities are assigned following the Standard Causality Assignment Procedure such that the number of storage elements in integral causality is maximised. A system of differential and algebraic equations (DAEs) is derived from the BG that holds for all system modes. It is distinguished between storage elements with mode independent causality and those that change causality due to switch state changes.
Bond Graph Methodology
(2010)
Nowadays, engineering systems are becoming increasingly complex and, for design purposes, must be considered as multidisciplinary systems made up of components from different engineering disciplines. With regard to the systematic development and the analysis of models, interdisciplinary methodologies supported by software become more and more important. Bond graphs are a graphical description formalism particularly suited for multidisciplinary systems and used by modellers across the world.
Bond Graph Methodology gives a comprehensive, in-depth representation of the state of the art, including recent results gathered from research articles, dissertations and contributions by the author on a number of topics. The structured and rigorous presentation systematically covers model development, analysis of models, numerical computation of models and modern software that can be used for a bond graph approach. The book also includes a range of case studies illustrating various applications of the methodology and provides a glossary.
Bond Graph Methodology addresses fundamentals, as well as advanced topics, e.g., models of variable structure, bond graphs for sensitivity analysis and generation of equations for the study of robustness. The compilation and presentation of the material has been inspired by the author's extensive experience in research and teaching.
A useful text for advanced courses in modelling, simulation and control, Bond Graph Methodology can also be used for self-study. It has been designed to serve readers interested in the subject of bond graph modelling and those with expertise in related areas, as well as members of the worldwide community of bond graph modellers.
This book shows in a comprehensive presentation how Bond Graph methodology can support model-based control, model-based fault diagnosis, fault accommodation, and failure prognosis by reviewing the state-of-the-art, presenting a hybrid integrated approach to Bond Graph model-based fault diagnosis and failure prognosis, and by providing a review of software that can be used for these tasks.
Failure prognostic builds up on constant data acquisition and processing and fault diagnosis and is an essential part of predictive maintenance of smart manufacturing systems enabling condition based maintenance, optimised use of plant equipment, improved uptime and yield and to prevent safety problems. Given known control inputs into a plant and real sensor outputs or simulated measurements, the model-based part of the proposed hybrid method provides numerical values of unknown parameter degradation functions at sampling time points by the evaluation of equations that have been derived offline from a bicausal diagnostic bond graph. These numerical values are computed concurrently to the constant monitoring of a system and are stored in a buffer of fixed length. The data-driven part of the method provides a sequence of remaining useful life estimates by repeated projection of the parameter degradation into the future based on the use of values in a sliding time window. Existing software can be used to determine the best fitting function and can account for its random parameters. The continuous parameter estimation and their projection into the future can be performed in parallel for multiple isolated simultaneous parametric faults on a multicore, multiprocessor computer.
The proposed hybrid bond graph model-based, data-driven method is verified by an offline simulation case study of a typical power electronic circuit. It can be used to implement embedded systems that enable cooperating machines in smart manufacturing to perform prognostic themselves.
