Fachbereich Ingenieurwissenschaften und Kommunikation
Refine
H-BRS Bibliography
- yes (25)
Departments, institutes and facilities
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (25) (remove)
Document Type
- Conference Object (11)
- Article (10)
- Part of a Book (2)
- Contribution to a Periodical (1)
- Doctoral Thesis (1)
Year of publication
- 2019 (25) (remove)
Keywords
- Extrusion blow molding (2)
- evaluation (2)
- injection moulding (2)
- learning outcomes (2)
- modeling of complex systems (2)
- ACPYPE (1)
- ANN controller (1)
- Adams-Moulton (1)
- Aircraft (1)
- B-splines (1)
Herein we report an update to ACPYPE, a Python3 tool that now properly converts AMBER to GROMACS topologies for force fields that utilize nondefault and nonuniform 1–4 electrostatic and nonbonded scaling factors or negative dihedral force constants. Prior to this work, ACPYPE only converted AMBER topologies that used uniform, default 1–4 scaling factors and positive dihedral force constants. We demonstrate that the updated ACPYPE accurately transfers the GLYCAM06 force field from AMBER to GROMACS topology files, which employs non-uniform 1–4 scaling factors as well as negative dihedral force constants. Validation was performed using β-d-GlcNAc through gas-phase analysis of dihedral energy curves and probability density functions. The updated ACPYPE retains all of its original functionality, but now allows the simulation of complex glycomolecular systems in GROMACS using AMBER-originated force fields. ACPYPE is available for download at https://github.com/alanwilter/acpype.
This paper proposes an approach to an ANN-based temperature controller design for a plastic injection moulding system. This design approach is applied to the development of a controller based on a combination of a classical ANN and integrator. The controller provides a fast temperature response and zero steady-state error for three typical heaters (bar, nozzle, and cartridge) for a plastic moulding system. The simulation results in Matlab Simulink software and in comparison to an industrial PID regulator have shown the advantages of the controller, such as significantly less overshoot and faster transient (compared to PID with autotuning) for all examined heaters. In order to verify the proposed approach, the designed ANN controller was implemented and tested using an experimental setup based on an STM32 board.
The paper presents the topological reduction method applied to gas transport networks, using contraction of series, parallel and tree-like subgraphs. The contraction operations are implemented for pipe elements, described by quadratic friction law. This allows significant reduction of the graphs and acceleration of solution procedure for stationary network problems. The algorithm has been tested on several realistic network examples. The possible extensions of the method to different friction laws and other elements are discussed.
Atmospheric aerosols affect the power production of solar energy systems. Their impact depends on both the atmospheric conditions and the solar technology employed. By being a region with a lack in power production and prone to high solar insolation, West Africa shows high potential for the application of solar power systems. However, dust outbreaks, containing high aerosol loads, occur especially in the Sahel, located between the Saharan desert in the north and the Sudanian Savanna in the south. They might affect the whole region for several days with significant effects on power generation. This study investigates the impact of atmospheric aerosols on solar energy production for the example year 2006 making use of six well instrumented sites in West Africa. Two different solar power technologies, a photovoltaic (PV) and a parabolic through (PT) power plant, are considered. The daily reduction of solar power due to aerosols is determined over mostly clear-sky days in 2006 with a model chain combining radiative transfer and technology specific power generation. For mostly clear days the local daily reduction of PV power (at alternating current) (PVAC) and PT power (PTP) due to the presence of aerosols lies between 13 % and 22 % and between 22 % and 37 %, respectively. In March 2006 a major dust outbreak occurred, which serves as an example to investigate the impact of an aerosol extreme event on solar power. During the dust outbreak, daily reduction of PVAC and PTP of up to 79 % and 100 % occur with a mean reduction of 20 % to 40 % for PVAC and of 32 % to 71 % for PTP during the 12 days of the event.
It is shown that the electrochemical kinetics of alkaline methanol oxidation can be reduced by setting certain fast reactions contained in it to a steady state. As a result, the underlying system of Ordinary Differential Equations (ODE) is transformed to a system of Differential-Algebraic Equations (DAE). We measure the precision characteristics of such transformation and discuss the consequences of the obtained model reduction.
Pseudopotential (PP)-basierte Lattice-Boltzmann-Methoden werden zunehmend für die Simulation von Mehrphasenströmungen eingesetzt. Da sie auf einem phänomenologischen Ansatz basieren, ist ihr Einsatz mit einem hohen Modellierungsaufwand verbunden. Zudem entstehen an den Phasengrenzen sogenannte Scheingeschwindigkeiten, welche Genauigkeit und numerische Stabilität beeinträchtigen. Daher werden PP-Modelle in dieser Arbeit um drei neue Aspekte erweitert. Erstens wird gezeigt, dass bei der Modellierung unterschiedlicher Kontaktwinkel mit gängigen Methoden in Kombination mit verbesserten Kräfteschemata Scheintröpfchen entstehen. Diese werden durch einen neuartigen Ansatz eliminiert, der auf zusätzlichen Randbedingungen für alle Wechselwirkungskräfte basiert. Diese Technik verhindert nicht nur das Auftreten der Scheintröpfchen, sondern erhöht auch die Stabilität in wandgebundenen Strömungen. Zweitens wird ein neuartiges Verfahren zur Reduktion von Scheingeschwindigkeiten eingeführt. Dabei wird die Diskretisierung der Interaktionskräfte erweitert und die zusätzlichen, freien Koeffizienten in Simulationen statischer Tropfen numerisch optimiert. Die resultierende Diskretisierung wurde in Simulationen stationärer und dynamischer Testfälle validiert, wobei Scheingeschwindigkeiten deutlich reduziert werden konnten. Drittens und letztens wurden die Diffusionseigenschaften in Mehrstoffsystemen detailliert untersucht, wobei eine kritische Abhängigkeit zwischen den makroskopischen Diffusionskoeffizienten und dem Kräfteschema aufgezeigt wird. Diese Analyse bildet die Grundlage für den Vergleich und die zukünftige Entwicklung neuer Potentialfunktionen (für Mehrstoffsysteme) und reduziert den Modellierungsaufwand.
Energy Profiles of the Ring Puckering of Cyclopentane, Methylcyclopentane and Ethylcyclopentane
(2019)
Background & Objective: Due to the policy goals for sustainable energy production, renewable energy plants such as photovoltaics are increasingly in use. The energy production from solar radiation depends strongly on atmospheric conditions. As the weather mostly changes, electrical power generation fluctuates, making technical planning and control of power grids to a complex problem. Due to used materials (semiconductors e.g. silicon, gallium arsenide, cadmium telluride) the photovoltaic cells are spectrally selective. It means that only radiation of certain wavelengths converts into electrical energy. A material property called spectral response characterizes a certain degree of conversion of solar radiation into the electric current for each wavelength of solar light.
The need for innovation around the control functions of inverters is great. PV inverters were initially expected to be passive followers of the grid and to disconnect as soon as abnormal conditions happened. Since future power systems will be dominated by generation and storage resources interfaced through inverters these converters must move from following to forming and sustaining the grid. As “digital natives” PV inverters can also play an important role in the digitalisation of distribution networks. In this short review we identified a large potential to make the PV inverter the smart local hub in a distributed energy system. At the micro level, costs and coordination can be improved with bidirectional inverters between the AC grid and PV production, stationary storage, car chargers and DC loads. At the macro level the distributed nature of PV generation means that the same devices will support both to the local distribution network and to the global stability of the grid. Much success has been obtained in the former. The later remains a challenge, in particular in terms of scaling. Yet there is some urgency in researching and demonstrating such solutions. And while digitalisation offers promise in all control aspects it also raises significant cybersecurity concerns.