Fachbereich Ingenieurwissenschaften und Kommunikation
Refine
H-BRS Bibliography
- yes (200)
Departments, institutes and facilities
- Fachbereich Ingenieurwissenschaften und Kommunikation (200)
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (102)
- Fachbereich Informatik (14)
- Internationales Zentrum für Nachhaltige Entwicklung (IZNE) (13)
- Institute of Visual Computing (IVC) (9)
- Institut für funktionale Gen-Analytik (IFGA) (4)
- Fachbereich Angewandte Naturwissenschaften (3)
- Institut für Medienentwicklung und -analyse (IMEA) (3)
- Verwaltung (3)
- Fachbereich Wirtschaftswissenschaften (2)
Document Type
- Article (200) (remove)
Year of publication
Keywords
- ISM: molecules (6)
- West Africa (4)
- Hydrogen storage (3)
- Lattice Boltzmann Method (3)
- Optimization (3)
- error analysis (3)
- magnetic resonance spectrometers auxiliary equipment (3)
- polyethylene (3)
- pulsars: general (3)
- radiowave spectrometers (3)
In this paper, the performance evaluation of Frequency Modulated Chaotic On-Off Keying (FM-COOK) in AWGN, Rayleigh and Rician fading channels is given. The simulation results show that an improvement in BER can be gained by incorporating the FM modulation with COOK for SNR values less than 10dB in AWGN case and less than 6dB for Rayleigh and Rician fading channels.
Trueness and precision of milled and 3D printed root-analogue implants: A comparative in vitro study
(2023)
Pipeline transport is an efficient method for transporting fluids in energy supply and other technical applications. While natural gas is the classical example, the transport of hydrogen is becoming more and more important; both are transmitted under high pressure in a gaseous state. Also relevant is the transport of carbon dioxide, captured in the places of formation, transferred under high pressure in a liquid or supercritical state and pumped into underground reservoirs for storage. The transport of other fluids is also required in technical applications. Meanwhile, the transport equations for different fluids are essentially the same, and the simulation can be performed using the same methods. In this paper, the effect of control elements such as compressors, regulators and flaptraps on the stability of fluid transport simulations is studied. It is shown that modeling of these elements can lead to instabilities, both in stationary and dynamic simulations. Special regularization methods were developed to overcome these problems. Their functionality also for dynamic simulations is demonstrated for a number of numerical experiments.
The general method of topological reduction for the network problems is presented on example of gas transport networks. The method is based on a contraction of series, parallel and tree-like subgraphs for the element equations of quadratic, power law and general monotone dependencies. The method allows to reduce significantly the complexity of the graph and to accelerate the solution procedure for stationary network problems. The method has been tested on a large set of realistic network scenarios. Possible extensions of the method have been described, including triangulated element equations, continuation of the equations at infinity, providing uniqueness of solution, a choice of Newtonian stabilizer for nearly degenerated systems. The method is applicable for various sectors in the field of energetics, including gas networks, water networks, electric networks, as well as for coupling of different sectors.
The temperature of photovoltaic modules is modelled as a dynamic function of ambient temperature, shortwave and longwave irradiance and wind speed, in order to allow for a more accurate characterisation of their efficiency. A simple dynamic thermal model is developed by extending an existing parametric steady-state model using an exponential smoothing kernel to include the effect of the heat capacity of the system. The four parameters of the model are fitted to measured data from three photovoltaic systems in the Allgäu region in Germany using non-linear optimisation. The dynamic model reduces the root-mean-square error between measured and modelled module temperature to 1.58 K on average, compared to 3.03 K for the steady-state model, whereas the maximum instantaneous error is reduced from 20.02 to 6.58 K.
Solar photovoltaic power output is modulated by atmospheric aerosols and clouds and thus contains valuable information on the optical properties of the atmosphere. As a ground-based data source with high spatiotemporal resolution it has great potential to complement other ground-based solar irradiance measurements as well as those of weather models and satellites, thus leading to an improved characterisation of global horizontal irradiance. In this work several algorithms are presented that can retrieve global tilted and horizontal irradiance and atmospheric optical properties from solar photovoltaic data and/or pyranometer measurements. The method is tested on data from two measurement campaigns that took place in the Allgäu region in Germany in autumn 2018 and summer 2019, and the results are compared with local pyranometer measurements as well as satellite and weather model data. Using power data measured at 1 Hz and averaged to 1 min resolution along with a non-linear photovoltaic module temperature model, global horizontal irradiance is extracted with a mean bias error compared to concurrent pyranometer measurements of 5.79 W m−2 (7.35 W m−2) under clear (cloudy) skies, averaged over the two campaigns, whereas for the retrieval using coarser 15 min power data with a linear temperature model the mean bias error is 5.88 and 41.87 W m−2 under clear and cloudy skies, respectively.
During completely overcast periods the cloud optical depth is extracted from photovoltaic power using a lookup table method based on a 1D radiative transfer simulation, and the results are compared to both satellite retrievals and data from the Consortium for Small-scale Modelling (COSMO) weather model. Potential applications of this approach for extracting cloud optical properties are discussed, as well as certain limitations, such as the representation of 3D radiative effects that occur under broken-cloud conditions. In principle this method could provide an unprecedented amount of ground-based data on both irradiance and optical properties of the atmosphere, as long as the required photovoltaic power data are available and properly pre-screened to remove unwanted artefacts in the signal. Possible solutions to this problem are discussed in the context of future work.
Salts and proteins comprise two of the basic molecular components of biological materials. Kosmotropic/chaotropic co-solvation and matching ion water affinities explain basic ionic effects on protein aggregation observed in simple solutions. However, it is unclear how these theories apply to proteins in complex biological environments and what the underlying ionic binding patterns are. Using the positive ion Ca2+ and the negatively charged membrane protein SNAP25, we studied ion effects on protein oligomerization in solution, in native membranes and in molecular dynamics (MD) simulations. We find that concentration-dependent ion-induced protein oligomerization is a fundamental chemico-physical principle applying not only to soluble but also to membrane-anchored proteins in their native environment. Oligomerization is driven by the interaction of Ca2+ ions with the carboxylate groups of aspartate and glutamate. From low up to middle concentrations, salt bridges between Ca2+ ions and two or more protein residues lead to increasingly larger oligomers, while at high concentrations oligomers disperse due to overcharging effects. The insights provide a conceptual framework at the interface of physics, chemistry and biology to explain binding of ions to charged protein surfaces on an atomistic scale, as occurring during protein solubilisation, aggregation and oligomerization both in simple solutions and membrane systems.
Die Norm EN ISO 13849-1 stellt explizite Anforderungen an sicherheitsgerichtete SPS-Software. Wie lassen sich diese im Maschinenbau praxisgerecht umsetzen? Mit dieser Frage hat sich ein von der DGUV gefördertes und an der Hochschule Bonn-Rhein-Sieg durchgeführtes Projekt beschäftigt. Der Beitrag skizziert die Vorgehensweise zur möglichen Umsetzung der normativen Anforderungen. Diese Vorgehensweise ist unabhängig von der verwendeten Sicherheits-SPS und daher allgemein anwendbar. Es wird auf insgesamt 10 dokumentierte Beispiele und einen ausführlichen Forschungsbericht verwiesen, die downloadbar sind.
DeltaV Neural ist eine Softwareapplikation innerhalb des Prozessautomatisierungssystems DeltaV, die es dem Anwender ermöglicht, auf einfache Art und Weise Softsensoren zu konfigurieren. Softsensoren besitzen die Aufgabe, schwer messbare oder nur in großen Zeitabständen ermittelbare Prozessausgangsgrößen mittels einfacher und schneller messbarer Ersatzmessgrößen zu schätzen bzw. vorherzusagen.
Dem RTPM (Real-Time Performance Monitoring) wurde in den letzten Jahren in der Automatisierungstechnik immer mehr Beachtung geschenkt. Drei ausgewählte Aspekte des RPTM werden behandelt: Alarmanalyse, Reglerperformance und Stelleinrichtungen. Die Reduktion von Alarmmeldungen mit Hilfe einer Alarmanalyse wird mit Hilfe von Beispielen aus der Industrie veranschaulicht. Ziel einer Analyse ist die Identifikation von (1) falschen Alarmgrenzen, (2) Reglern, bei denen Störungen im Handbetrieb ausgeregelt werden, (3) Reglern, bei denen Betriebspunktänderungen im Handbetrieb ausgeführt werden, (4) Reglern mit Stellgrößen bei 0% oder 100%, (5) falschen Reglerparametern sowie (6) Fehlern in der Messtechnik, Antrieben, Klappen oder Ventilen. Die industrielle Anwendung der Überwachung der Reglerperformance wird anhand des in das Prozessautomatisierungssystem DeltaV von Emerson Process Management integrierten Softwareproduktes DeltaV Inspect erläutert. DeltaV überwacht und bewertet (1) die Bereichsüberschreitungen der Regelgrößen und der Stellsignale, (2) die Betriebsarten (Hand oder Automatik) und (3) die Regelungsgüte. Die Regelungsgüte wird bei einem konstanten Sollwert und stochastischen Störungen aus dem Unterschied zwischen der tatsächlichen und der theoretisch erreichbaren Varianz des Regelfehlers berechnet. Anstelle einer Korrelations- bzw. Regressionsanalyse wird die theoretisch erreichbare minimale Varianz aus der aktuellen Varianz des Regelfehlers und der Varianz der Abweichung der aufeinander folgenden Regelfehlerabtastwerte berechnet.
Herein we report an update to ACPYPE, a Python3 tool that now properly converts AMBER to GROMACS topologies for force fields that utilize nondefault and nonuniform 1–4 electrostatic and nonbonded scaling factors or negative dihedral force constants. Prior to this work, ACPYPE only converted AMBER topologies that used uniform, default 1–4 scaling factors and positive dihedral force constants. We demonstrate that the updated ACPYPE accurately transfers the GLYCAM06 force field from AMBER to GROMACS topology files, which employs non-uniform 1–4 scaling factors as well as negative dihedral force constants. Validation was performed using β-d-GlcNAc through gas-phase analysis of dihedral energy curves and probability density functions. The updated ACPYPE retains all of its original functionality, but now allows the simulation of complex glycomolecular systems in GROMACS using AMBER-originated force fields. ACPYPE is available for download at https://github.com/alanwilter/acpype.
Ein Projektvertrag bietet den Geschäftspartnern rechtliche Sicherheit. Häufig wird er von Anwälten aufgesetzt. Insbesondere in kleinen und mittelständischen Unternehmen ist es aber auch oft der Projektleiter, der den Vertrag formuliert. Prof. Dr. Uwe Braehmer erklärt, unter welchen Bedingungen man einen Vertrag ohne juristische Beratung erstellen kann und liefert eine Checkliste mit den Regelungen, die ein Vertrag enthalten sollte.
Fallstrick Arbeitsrecht
(2005)
Ghana suffers from frequent power outages, which can be compensated by off-grid energy solutions. Photovoltaic-hybrid systems become more and more important for rural electrification due to their potential to offer a clean and cost-effective energy supply. However, uncertainties related to the prediction of electrical loads and solar irradiance result in inefficient system control and can lead to an unstable electricity supply, which is vital for the high reliability required for applications within the health sector. Model predictive control (MPC) algorithms present a viable option to tackle those uncertainties compared to rule-based methods, but strongly rely on the quality of the forecasts. This study tests and evaluates (a) a seasonal autoregressive integrated moving average (SARIMA) algorithm, (b) an incremental linear regression (ILR) algorithm, (c) a long short-term memory (LSTM) model, and (d) a customized statistical approach for electrical load forecasting on real load data of a Ghanaian health facility, considering initially limited knowledge of load and pattern changes through the implementation of incremental learning. The correlation of the electrical load with exogenous variables was determined to map out possible enhancements within the algorithms. Results show that all algorithms show high accuracies with a median normalized root mean square error (nRMSE) <0.1 and differing robustness towards load-shifting events, gradients, and noise. While the SARIMA algorithm and the linear regression model show extreme error outliers of nRMSE >1, methods via the LSTM model and the customized statistical approaches perform better with a median nRMSE of 0.061 and stable error distribution with a maximum nRMSE of <0.255. The conclusion of this study is a favoring towards the LSTM model and the statistical approach, with regard to MPC applications within photovoltaic-hybrid system solutions in the Ghanaian health sector.
This work proposes a novel approach for probabilistic end-to-end all-sky imager-based nowcasting with horizons of up to 30 min using an ImageNet pre-trained deep neural network. The method involves a two-stage approach. First, a backbone model is trained to estimate the irradiance from all-sky imager (ASI) images. The model is then extended and retrained on image and parameter sequences for forecasting. An open access data set is used for training and evaluation. We investigated the impact of simultaneously considering global horizontal (GHI), direct normal (DNI), and diffuse horizontal irradiance (DHI) on training time and forecast performance as well as the effect of adding parameters describing the irradiance variability proposed in the literature. The backbone model estimates current GHI with an RMSE and MAE of 58.06 and 29.33 W m−2, respectively. When extended for forecasting, the model achieves an overall positive skill score reaching 18.6 % compared to a smart persistence forecast. Minor modifications to the deterministic backbone and forecasting models enables the architecture to output an asymmetrical probability distribution and reduces training time while leading to similar errors for the backbone models. Investigating the impact of variability parameters shows that they reduce training time but have no significant impact on the GHI forecasting performance for both deterministic and probabilistic forecasting while simultaneously forecasting GHI, DNI, and DHI reduces the forecast performance.
The introduction of new steering conceptsSteer-by-Wire (SBW) gives possibility to replace theconventional steering wheel by an alternative userinterface such as a sidestick. In SBW system the sidestickcan be used as user input element instead of a steeringwheel. The implementation of sidestick in the Human-Machine-Interface (HMI) allows combiningthe conventional steering consisting of a steeringwheel, an accelerator and a brake pedal into a singleelement. Also the implementation of the sidestickcreates new, interesting and flexible design optionswhich can be used to transform the driver’s spatialenvironment. This article describes an active sidestickfor a vehicle which has been developed, integrated andtested in accordance of haptic, ergonomic and safetyrelevant requirements. The control strategies used forthe active attenuators of the sidestick have beeninvestigated and optimised using a Simulink model.
Novel methods for contingency analysis of gas transport networks are presented. They are motivated by the transition of our energy system where hydrogen plays a growing role. The novel methods are based on a specific method for topological reduction and so-called supernodes. Stationary Euler equations with advanced compressor thermodynamics and a gas law allowing for gas compositions with up to 100% hydrogen are used. Several measures and plots support an intuitive comparison and analysis of the results. In particular, it is shown that the newly developed methods can estimate locations and magnitudes of additional capacities (injection, buffering, storage etc.) with a reasonable performance for networks of relevant composition and size.
Alkaline methanol oxidation is an important electrochemical process in the design of efficient fuel cells. Typically, a system of ordinary differential equations is used to model the kinetics of this process. The fitting of the parameters of the underlying mathematical model is performed on the basis of different types of experiments, characterizing the fuel cell. In this paper, we describe generic methods for creation of a mathematical model of electrochemical kinetics from a given reaction network, as well as for identification of parameters of this model. We also describe methods for model reduction, based on a combination of steady-state and dynamical descriptions of the process. The methods are tested on a range of experiments, including different concentrations of the reagents and different voltage range.
An Universitäten und Fachhochschulen ist die Mathematik-Ausbildung eines der Nadelöhre für angehende Ingenieurinnen und Ingenieure. Viele Studierende der Ingenieurwissenschaften scheitern in den ersten Studiensemestern an den Anforderungen der Mathematik. Lehrende, Fach- und Hochschuldidaktiker/innen und zunehmend auch Fachvertretungen und Verbände stellen sich die Frage, was an den Fakultäten und Fachbereichen getan werden kann, damit Studierende ihre mathematischen Fähigkeiten vergrößern und den anspruchsvollen Studienweg zur Ingenieurin oder zum Ingenieur meistern können.
Unternehmen agieren in einem dynamischen Umfeld mit hoher Komplexität und Unsicherheit. Um dabei langfristig wettbewerbsfähig zu bleiben, ist eine kontinuierliche Optimierung der Prozesse erforderlich. Eine konsequente Prozessorientierung wird daher seit langem angestrebt. Zur Ermittlung des aktuellen Standes der Prozessorganisation in deutschen Unternehmen hat die Gesellschaft für Organisation e. V. (gfo) eine Studie durchführen lassen, deren erste Ergebnisse hier vorgestellt werden.
In this paper, a gas-to-power (GtoP) system for power outages is digitally modeled and experimentally developed. The design includes a solid-state hydrogen storage system composed of TiFeMn as a hydride forming alloy (6.7 kg of alloy in five tanks) and an air-cooled fuel cell (maximum power: 1.6 kW). The hydrogen storage system is charged under room temperature and 40 bar of hydrogen pressure, reaching about 110 g of hydrogen capacity. In an emergency use case of the system, hydrogen is supplied to the fuel cell, and the waste heat coming from the exhaust air of the fuel cell is used for the endothermic dehydrogenation reaction of the metal hydride. This GtoP system demonstrates fast, stable, and reliable responses, providing from 149 W to 596 W under different constant as well as dynamic conditions. A comprehensive and novel simulation approach based on a network model is also applied. The developed model is validated under static and dynamic power load scenarios, demonstrating excellent agreement with the experimental results.
Interne Audits können mehr
(2024)
Dieser Beitrag zeigt, wie das Deutsche Zentrum für Luft- und Raumfahrt e. V. (DLR) Zufriedenheitsanalysen aus zwei Sichtweisen durchführt: Aus Sicht der Auditoren und aus Sicht der Managementbeauftragten der auditierten Institute und Einrichtungen. Die Ergebnisse fließen in die jährliche Auditprogrammplanung ein. Damit wird der Nutzen von internen Audits gesteigert.
Earth’s nearest candidate supermassive black hole lies at the centre of the Milky Way1. Its electromagnetic emission is thought to be powered by radiatively inefficient accretion of gas from its environment2, which is a standard mode of energy supply for most galactic nuclei. X-ray measurements have already resolved a tenuous hot gas component from which the black hole can be fed3. The magnetization of the gas, however, which is a crucial parameter determining the structure of the accretion flow, remains unknown. Strong magnetic fields can influence the dynamics of accretion, remove angular momentum from the infalling gas4, expel matter through relativistic jets5 and lead to synchrotron emission such as that previously observed6, 7, 8. Here we report multi-frequency radio measurements of a newly discovered pulsar close to the Galactic Centre9, 10, 11, 12 and show that the pulsar’s unusually large Faraday rotation (the rotation of the plane of polarization of the emission in the presence of an external magnetic field) indicates that there is a dynamically important magnetic field near the black hole. If this field is accreted down to the event horizon it provides enough magnetic flux to explain the observed emission—from radio to X-ray wavelengths—from the black hole.
Multi-epoch searches for relativistic binary pulsars and fast transients in the Galactic Centre
(2021)
Comparación de perfiles de ansiedad matemática entre estudiantes mexicanos y estudiantes alemanes
(2017)
Se determinan los perfiles de ansiedad matemática de estudiantes mexicanos y estudiantes alemanes por medio de la aplicación de un cuestionario desarrollado ex profeso. La ansiedad matemática se define en términos de tres descriptores: creencias, actitudes y emociones. Los autores definen un Índice de Ansiedad Matemática, al aplicarlo encuentran que los estudiantes alemanes presentan un valor mayor de dicho Índice, lo que significa que tienen una mayor nivel de ansiedad matemática. Las diferencias en los valores del Índice de Ansiedad Matemática se interpretan en términos de diferencias culturales. La interpretación parece ser consistente con las diferencias culturales y se ajusta a los resultados obtenidos.
We consider the Hopfield model with n neurons and an increasing number p=p(n) of randomly chosen patterns and use Stein's method to obtain rates of convergence for the central limit theorem of overlap parameters, which holds for every fixed choice of the overlap parameter for almost all realisations of the random patterns.
A Fourier scatterometry setup is evaluated to recover the key parameters of optical phase gratings. Based on these parameters, systematic errors in the printing process of two-photon polymerization (TPP) gray-scale lithography three-dimensional printers can be compensated, namely tilt and curvature deviations. The proposed setup is significantly cheaper than a confocal microscope, which is usually used to determine calibration parameters for compensation of the TPP printing process. The grating parameters recovered this way are compared to those obtained with a confocal microscope. A clear correlation between confocal and scatterometric measurements is first shown for structures containing either tilt or curvature. The correlation is also shown for structures containing a mixture of tilt and curvature errors (squared Pearson coefficient r2 = 0.92). This compensation method is demonstrated on a TPP printer: a diffractive optical element printed with correction parameters obtained from Fourier scatterometry shows a significant reduction in noise as compared to the uncompensated system. This verifies the successful reduction of tilt and curvature errors. Further improvements of the method are proposed, which may enable the measurements to become more precise than confocal measurements in the future, since scatterometry is not affected by the diffraction limit.
Das AD 2000-Regelwerk ist der dominierende Standard für den Druckbehälterbau in Deutschland. Die bereits in anderen europäischen Ländern verbreitete DIN EN 13445 findet kaum Berücksichtigung. Dies allerdings zu Unrecht, denn ein aktueller Vergleich, der im Rahmen einer Bachelorarbeit durchgeführte wurde, zeigt: Die EN 13445 ist zu einer echten Alternative gereift. Gerade das Hauptargument gegen eine Umstellung, die steigenden Kosten, ist längst überholt.
The mechanical properties of plastic components, especially if they are made of semi-crystalline polymers, are considerably influenced by the process conditions. The degree of crystallization influences thermal and mechanical properties. Even more important is the orientation of molecules due to stretching of the polymer melt. Anisotropic material properties are the result of such orientations. Up to now all these effects are not considered within the simulation models of blow molded parts.