Internationales Zentrum für Nachhaltige Entwicklung (IZNE)
Refine
H-BRS Bibliography
- yes (54)
Departments, institutes and facilities
Document Type
- Conference Object (54) (remove)
Year of publication
Keywords
- Economy (2)
- Sustainability (2)
- biodiversity (2)
- farmers (2)
- insect farming and processing (2)
- Anthropocene (1)
- Consumer Online Behaviour (1)
- Consumer behavior (1)
- Corporate Social Responsibility (1)
- Delphi-method (1)
Sustainable urban soil management is becoming increasingly crucial due to its vital role in climate and water regulation and its significant potential for storing soil organic carbon (SOC). This significance is emphasized considering the ongoing urbanization and climate change issues. Although SOC is influenced by many factors, such as soil type and climate fluctuations (temperature, precipitation patterns), on a regional scale, land use and management practices (e.g., fertilization, irrigation) can have a more significant impact on SOC storage and the balance of soil-atmosphere carbon fluxes. However, there is still a limited understanding of the amount of humus content in urban soils and the effects of urban development and management practices on soil health and carbon storage. We investigated how management practices in urban green spaces influence soil carbon storage as the primary indicator of soil health.
The present study was carried out in the Bonn-Rhein-Sieg area, as the region is vital in terms of sustainable urban and regional development with a high population density (Rhein-Sieg district: 338.4, Bonn: 520.9 inhabitants/km2) in Germany. A survey was conducted with owners and managers of urban private (e.g., allotment and backyard garden) and public green spaces on the practices for the most common vegetation types (e.g., lawn, vegetable, ornamental). In the autumn and winter of 2022, 248 soil samples (0–20 cm depth) were collected from 95 private and public green spaces in the study area and analyzed for physiochemical and biological properties. Multivariate Analysis of Variance (MANOVA) was performed to assess the effects of different management practices on soil properties.
Our results indicate that the average SOC stock in public green areas (94.67 Mg ha-1) is substantially higher than in private ones (house garden 67.72 Mg ha-1, allotment garden 73.15 Mg ha-1). Moreover, urban green spaces with vegetables (91.66 Mg ha-1) and ornamentals (85.05 mg ha-1) show greater SOC stock levels when comparing vegetation types (lawn 62.48 Mg ha-1). Significant differences in SOC are also found for various management practices. Specifically, the monthly fertilization schedule resulted in higher SOC levels (127.37 Mg ha⁻¹) compared to the yearly fertilization schedule (76.88 Mg ha⁻¹). Additionally, the use of organic fertilizers contributed to increased SOC levels (84.40 Mg ha⁻¹) in contrast to mineral fertilizer applications (65.31 Mg ha⁻¹). The average SOC stock in all the studied urban green spaces (85 mg ha-1) was higher than the average SOC stock in arable soils in Germany (47.30 Mg ha-1). The higher SOC in the region could be due to vegetation types and fertilization frequencies, which show statistically significant effects (p-value <0.001). Other management practices (e.g., irrigation type and frequency) did not show a significant effect. Our findings highlight the significance of soil management practices, particularly in selecting vegetation types and determining fertilization frequency, as essential factors influencing urban SOC.
In intensively used agricultural landscapes, path margins are one of the few refuges and nurseries for wildlife. They provide e. g. food sources and overwintering opportunities for many insects, serve as migration corridors for animals, protect soil from erosion, increase its water-holding capacity, and increase soil organic carbon, contributing thus directly to biodiversity conservation and climate change mitigation. Path margins are often municipally owned but used and managed by agriculture. For a path margin to be functional, certain conditions must be fulfilled, such as the width, the botanical composition, and how it is managed through the seasons. Therefore, it must be managed under specific requirements. A multifunctional path margin can be achieved only through the commitment of all stakeholders (e.g., farmers, municipalities, conservationists, and civil society).
Accurate forecasting of solar irradiance is crucial for the integration of solar energy into the power grid, power system planning, and the operation of solar power plants. The Weather Research and Forecasting (WRF) model, with its solar radiation (WRF-Solar) extension, has been used to forecast solar irradiance in various regions worldwide. However, the application of the WRF-Solar model for global horizontal irradiance (GHI) forecasting in West Africa, specifically in Ghana, has not been studied. This study aims to evaluate the performance of the WRF-Solar model for GHI forecasting in Ghana, focusing on 3 health centers (Kologo, Kumasi and Akwatia) for the year 2021. We applied a two one-way nested domain (D1=15 km and D2=3 km) to investigate the ability of the WRF solar model to forecast GHI up to 72 hours in advance under different atmospheric conditions. The initial and lateral boundary conditions were taken from the ECMWF operational forecasts. In addition, the optical aerosol depth (AOD) data at 550 nm from the Copernicus Atmosphere Monitoring Service (CAMS) were considered. The study uses statistical metrics such as mean bias error (MBE), root mean square error (RMSE), to evaluate the performance of the WRF-Solar model with the observational data obtained from automatic weather stations in the three health centers in Ghana. The results of this study will contribute to the understanding of the capabilities and limitations of the WRF-Solar model for forecasting GHI in West Africa, particularly in Ghana, and provide valuable information for stakeholders involved in solar energy generation and grid integration towards optimized management of in the region.
Hydrogen as a versatile, greenhouse gas-free energy carrier will play an important role in our future economy. Yet sustainable, competitive production and distribution of hydrogen remains a challenge. Highly integrated solar water splitting systems aim to combine solar energy harvesting and electrolysis in a single device, similar to a photovoltaic module.[1] Such a system can produce hydrogen locally without the requirement to be connected to the electricity grid. Unlike large electrolysis that draws power from the grid, the power density of such a device is reduced so far that it does not require active cooling, but its operating temperature will closely follow outdoor conditions.
Here, we present our work on high-efficiency integrated solar water splitting devices based on multi-junction solar absorbers. The light-absorbing component is sensitive to the shape of the solar spectrum and generally becomes more efficient at lower temperatures. Catalysis, on the other hand, benefits from higher temperatures. These conflicting trends wih respect to the temperature impact the design of the solar hydrogen production system. We analyse how the local climate affects production efficiency[2] and show in a lab study that adequate system design allows efficient operation at temperatures as low as -20°C.[3] These insights can help to design small-scale distributed solar hydrogen production for both temperate regions, but also more extreme climatic conditions.
The electricity grid of the future will be built on renewable energy sources, which are highly variable and dependent on atmospheric conditions. In power grids with an increasingly high penetration of solar photovoltaics (PV), an accurate knowledge of the incoming solar irradiance is indispensable for grid operation and planning, and reliable irradiance forecasts are thus invaluable for energy system operators. In order to better characterise shortwave solar radiation in time and space, data from PV systems themselves can be used, since the measured power provides information about both irradiance and the optical properties of the atmosphere, in particular the cloud optical depth (COD). Indeed, in the European context with highly variable cloud cover, the cloud fraction and COD are important parameters in determining the irradiance, whereas aerosol effects are only of secondary importance.
Intention: Within the research project EnerSHelF (Energy-Self-Sufficiency for Health Facilities in Ghana), i. a. energy-meteorological and load-related measurement data are collected, for which an overview of the availability is to be presented on a poster.
Context: In Ghana, the total electricity consumed has almost doubled between 2008 and 2018 according to the Energy Commission of Ghana. This goes along with an unstable power grid, resulting in power outages whenever electricity consumption peaks. The blackouts called "dumsor" in Ghana, pose a severe burden to the healthcare sector. Innovative solutions are needed to reduce greenhouse gas emissions and improve energy and health access.
West Africa has great potential for the use of solar energy systems, as it has both a high solar radiation rate and a lack of energy production. West Africa is a very aerosol-rich region, whose effects on photovoltaic (PV) use are due to both atmospheric conditions and existing solar technology. This study reports the variability of aerosol optical properties in the city of Koforidua, Ghana over the period 2016 to 2020, and their impact on the radiation intensity and efficiency of a PV cell. The study used AERONET ground (Giles et al., 2019) and satellite data produced by CAMS (Gschwind, et al., 2019), which both provide aerosol optical depth (AOD) and metrological parameters used for radiative transfer calculations with libRadtran (Emde, et al., 2016). A spectrally resolved PV model (Herman-Czezuch et al., 2022) is then used to calculate the PV yield of two PV technologies: polycrystalline and amorphous silicon. It is observed that for both data sets, the aerosol is mainly composed of dust and organic matter, with a very increased AOD load during the harmattan period (December-February), also due to the fires observed during this period.
The aim of this paper is to assess the objectives of farmers’ challenges in enhancing biodiversity. The so-called “trilemma” (WBGU 2021) of land use stems from the multiple demands made on land for the benefit of mitigating climate change, securing food and maintaining biodiversity. The agricultural sector is accused of maladministration: it is blamed for causing soil contamination, animal cruelty, bee mortality and climate change. That is why farmers are seen as key actors at all levels. They are, however, also key players when it comes to overcoming the problems of the future. Their supportive role is urgently needed, but farmers find themselves caught between a “rock” and a ”hard place”. Consumers are calling for sustainable, environmentally friendly production and inexpensive food products that do not contain pesticide residues, demanding enough food for all. Farmers are restricted by the wants and needs of consumers who are influenced by interest groups and are exposed to direct and indirect influencing factors and their interdependencies. They are also tasked with balancing the scrutiny of the critical public on the one hand, and the control exercised by eager authorities on the other.
As part of the DINA (Diversity of Insects in Nature protected Areas) project, a trans- and interdisciplinary research study, we collected and surveyed the data of farmers who are farming within or close to the 21 selected nature protected areas included in the DINA project. Data was collected as part of a mixed method approach using a semi-structured questionnaire. The methodological and strategic approach and interdependencies of issues demonstrate the complexity of today’s problems. To investigate this, we first used the data collection method using questionnaires with closed and open questions. The conflicts and obstacles farmers face were evaluated, and the results show farmers’ willingness and the importance of appreciation shown to farmers for implementation of biodiversity measures. The paper proposes some follow-up activities (quantitative study) to verify the objectives. The results will later lead to recommendations for policymakers and farmers in all German nature protected areas.
The accurate forecasting of solar radiation plays an important role for predictive control applications for energy systems with a high share of photovoltaic (PV) energy. Especially off-grid microgrid applications using predictive control applications can benefit from forecasts with a high temporal resolution to address sudden fluctuations of PV-power. However, cloud formation processes and movements are subject to ongoing research. For now-casting applications, all-sky-imagers (ASI) are used to offer an appropriate forecasting for aforementioned application. Recent research aims to achieve these forecasts via deep learning approaches, either as an image segmentation task to generate a DNI forecast through a cloud vectoring approach to translate the DNI to a GHI with ground-based measurement (Fabel et al., 2022; Nouri et al., 2021), or as an end-to-end regression task to generate a GHI forecast directly from the images (Paletta et al., 2021; Yang et al., 2021). While end-to-end regression might be the more attractive approach for off-grid scenarios, literature reports increased performance compared to smart-persistence but do not show satisfactory forecasting patterns (Paletta et al., 2021). This work takes a step back and investigates the possibility to translate ASI-images to current GHI to deploy the neural network as a feature extractor. An ImageNet pre-trained deep learning model is used to achieve such translation on an openly available dataset by the University of California San Diego (Pedro et al., 2019). The images and measurements were collected in Folsom, California. Results show that the neural network can successfully translate ASI-images to GHI for a variety of cloud situations without the need of any external variables. Extending the neural network to a forecasting task also shows promising forecasting patterns, which shows that the neural network extracts both temporal and momentarily features within the images to generate GHI forecasts.
Hydrogen is a versatile energy carrier. When produced with renewable energy by water splitting, it is a carbon neutral alternative to fossil fuels. The industrialization process of this technology is currently dominated by electrolyzers powered by solar or wind energy. For small scale applications, however, more integrated device designs for water splitting using solar energy might optimize hydrogen production due to lower balance of system costs and a smarter thermal management. Such devices offer the opportunity to thermally couple the solar cell and the electrochemical compartment. In this way, heat losses in the absorber can be turned into an efficiency boost for the device via simultaneously enhancing the catalytic performance of the water splitting reactions, cooling the absorber, and decreasing the ohmic losses.[1,2] However,integrated devices (sometimes also referred to as “artificial leaves”), currently suffer from a lower technology readiness level (TRL) than the completely decoupled approach.
The rapid increase in solar photovoltaic (PV) installations worldwide has resulted in the electricity grid becoming increasingly dependent on atmospheric conditions, thus requiring more accurate forecasts of incoming solar irradiance. In this context, measured data from PV systems are a valuable source of information about the optical properties of the atmosphere, in particular the cloud optical depth (COD). This work reports first results from an inversion algorithm developed to infer global, direct and diffuse irradiance as well as atmospheric optical properties from PV power measurements, with the goal of assimilating this information into numerical weather prediction (NWP) models.
In den Atmosphärenwissenschaften spielt die Strahlungsbilanz der Erde eine wichtige Rolle für unser Verständnis des Klimasystems. Hier liefern ausgereifte Satellitenprodukte dekadische Klimazeitreihen mit einer so hohen Genauigkeit, dass z.B. Änderungen im Zusammenhang mit dem Klimawandel detektiert werden können. Dies gilt insbesondere auch für die solaren Strahlungsflüsse an der Erdoberfläche. Beim Vergleich dieser Satellitenprodukte mit instantanen Beobachtungen der Strahlung am Erdboden sind jedoch oft erhebliche Abweichungen feststellbar, die hauptsächlich durch kleinskalige Variabilität in der räumlichen Struktur von Wolken und ihrer Strahlungswirkung verursacht werden. Hier ist auch zu bedenken, dass Bodenbeobachtungen fast einer Punktmessung entsprechen, während Satellitenpixel eine Fläche in der Größenordnung von Quadratkilometern abtasten.
West Africa has a great potential for the application of solar energy systems, as it combines high levels of solar irradiance with a lack of energy production. Southern West Africa is a region with a very high aerosol load. Urbanization, uncontrolled fires, traffic as well as power plants and oil rigs lead to increasing anthropogenic emissions. The naturally circulating north winds bring mineral dust from the Sahel and Sahara and monsoons - sea salt and other oceanic compounds from the south. The EU-funded Dynamics-Aerosol-Chemistry-Cloud Interactions in West Africa (DACCIWA) project (2014–2018), dlivered the most complete dataset of the atmosphere over the region to date. In our study, we use in-situ measured optical properties of aerosols from the airborne campaign over the Gulf of Guinea and inland, and from ground measurements in coastal cities.
Background & Objective: Due to the policy goals for sustainable energy production, renewable energy plants such as photovoltaics are increasingly in use. The energy production from solar radiation depends strongly on atmospheric conditions. As the weather mostly changes, electrical power generation fluctuates, making technical planning and control of power grids to a complex problem. Due to used materials (semiconductors e.g. silicon, gallium arsenide, cadmium telluride) the photovoltaic cells are spectrally selective. It means that only radiation of certain wavelengths converts into electrical energy. A material property called spectral response characterizes a certain degree of conversion of solar radiation into the electric current for each wavelength of solar light.