Refine
H-BRS Bibliography
- yes (16) (remove)
Departments, institutes and facilities
- Fachbereich Informatik (16) (remove)
Document Type
- Article (7)
- Conference Object (3)
- Report (3)
- Preprint (2)
- Master's Thesis (1)
Year of publication
- 2019 (16) (remove)
Has Fulltext
- yes (16) (remove)
Keywords
- 802.11 (1)
- Active Learning (1)
- Aufrecht (1)
- Ball Tracking (1)
- Benchmark (1)
- Bond graph (1)
- Chemical imaging (1)
- Comparative Analysis (1)
- Cutting sticks problem (1)
- Directional antennas (1)
Die Wahrnehmung des perzeptionellen Aufrecht (perceptual upright, PU) variiert in Abhängigkeit der Gewichtung verschiedener gravitationsbezogener und körperbasierter Merkmale zwischen Kontexten und aufgrund individueller Unterschiede. Ziel des Vorhabens war es, systematisch zu untersuchen, welche Zusammenhänge zwischen visuellen und gravitationsbedingten Merkmalen bestehen. Das Vorhaben baute auf vorangegangen Untersuchungen auf, deren Ergebnisse indizieren, dass eine Gravitation von ca. 0,15g notwendig ist, um effiziente Selbstorientierungsinformationen bereit zu stellen (Herpers et. al, 2015; Harris et. al, 2014).
In dem hier beschriebenen Vorhaben wurden nun gezielt künstliche Gravitationsbedingungen berücksichtigt, um die Gravitationsschwelle, ab der ein wahrnehmbarer Einfluss beobachtbar ist, genauer zu quantifizieren bzw. die oben genannte Hypothese zu bestätigen. Es konnte gezeigt werden, dass die zentripetale Kraft, die auf einer rotierenden Zentrifuge entlang der Längsachse des Körpers wirkt, genauso efektiv wie Stehen mit normaler Schwerkraft ist, um das Gefühl des perzeptionellen Aufrechts auszulösen. Die erzielten Daten deuten zudem darauf hin, dass ein Gravitationsfeld von mindestens 0,15 g notwendig ist, um eine efektive Orientierungsinformation für die Wahrnehmung von Aufrecht zu liefern. Dies entspricht in etwa der Gravitationskraft von 0,17 g, die auf dem Mond besteht. Für eine lineare Beschleunigung des Körpers liegt der vestibulare Schwellenwert bei etwa 0,1 m/s2 und somit liegt der Wert für die Situation auf dem Mond von 1,6 m/s2 deutlich über diesem Schwellenwert.
More and more devices will be connected to the internet [3]. Many devicesare part of the so-called Internet of Things (IoT) which contains many low-powerdevices often powered by a battery. These devices mainly communicate with the manufacturers back-end and deliver personal data and secrets like passwords.
In an effort to assist researchers in choosing basis sets for quantum mechanical modeling of molecules (i.e. balancing calculation cost versus desired accuracy), we present a systematic study on the accuracy of computed conformational relative energies and their geometries in comparison to MP2/CBS and MP2/AV5Z data, respectively. In order to do so, we introduce a new nomenclature to unambiguously indicate how a CBS extrapolation was computed. Nineteen minima and transition states of buta-1,3-diene, propan-2-ol and the water dimer were optimized using forty-five different basis sets. Specifically, this includes one Pople (i.e. 6-31G(d)), eight Dunning (i.e. VXZ and AVXZ, X=2-5), twenty-five Jensen (i.e. pc-n, pcseg-n, aug-pcseg-n, pcSseg-n and aug-pcSseg-n, n=0-4) and nine Karlsruhe (e.g. def2-SV(P), def2-QZVPPD) basis sets. The molecules were chosen to represent both common and electronically diverse molecular systems. In comparison to MP2/CBS relative energies computed using the largest Jensen basis sets (i.e. n=2,3,4), the use of smaller sizes (n=0,1,2 and n=1,2,3) provides results that are within 0.11--0.24 and 0.09-0.16 kcal/mol. To practically guide researchers in their basis set choice, an equation is introduced that ranks basis sets based on a user-defined balance between their accuracy and calculation cost. Furthermore, we explain why the aug-pcseg-2, def2-TZVPPD and def2-TZVP basis sets are very suitable choices to balance speed and accuracy.
Currently, a variety of methods exist for creating different types of spatio-temporal world models. Despite the numerous methods for this type of modeling, there exists no methodology for comparing the different approaches or their suitability for a given application e.g. logistics robots. In order to establish a means for comparing and selecting the best-fitting spatio-temporal world modeling technique, a methodology and standard set of criteria must be established. To that end, state-of-the-art methods for this type of modeling will be collected, listed, and described. Existing methods used for evaluation will also be collected where possible.
Using the collected methods, new criteria and techniques will be devised to enable the comparison of various methods in a qualitative manner. Experiments will be proposed to further narrow and ultimately select a spatio-temporal model for a given purpose. An example network of autonomous logistic robots, ROPOD, will serve as a case study used to demonstrate the use of the new criteria. This will also serve to guide the design of future experiments that aim to select a spatio-temporal world modeling technique for a given task. ROPOD was specifically selected as it operates in a real-world, human shared environment. This type of environment is desirable for experiments as it provides a unique combination of common and novel problems that arise when selecting an appropriate spatio-temporal world model. Using the developed criteria, a qualitative analysis will be applied to the selected methods to remove unfit options.
Then, experiments will be run on the remaining methods to provide comparative benchmarks. Finally, the results will be analyzed and recommendations to ROPOD will be made.
Multi-robot systems (MRS) are capable of performing a set of tasks by dividing them among the robots in the fleet. One of the challenges of working with multirobot systems is deciding which robot should execute each task. Multi-robot task allocation (MRTA) algorithms address this problem by explicitly assigning tasks to robots with the goal of maximizing the overall performance of the system. The indoor transportation of goods is a practical application of multi-robot systems in the area of logistics. The ROPOD project works on developing multi-robot system solutions for logistics in hospital facilities. The correct selection of an MRTA algorithm is crucial for enhancing transportation tasks. Several multi-robot task allocation algorithms exist in the literature, but just few experimental comparative analysis have been performed. This project analyzes and assesses the performance of MRTA algorithms for allocating supply cart transportation tasks to a fleet of robots. We conducted a qualitative analysis of MRTA algorithms, selected the most suitable ones based on the ROPOD requirements, implemented four of them (MURDOCH, SSI, TeSSI, and TeSSIduo), and evaluated the quality of their allocations using a common experimental setup and 10 experiments. Our experiments include off-line and semi on-line allocation of tasks as well as scalability tests and use virtual robots implemented as Docker containers. This design should facilitate deployment of the system on the physical robots. Our experiments conclude that TeSSI and TeSSIduo suit best the ROPOD requirements. Both use temporal constraints to build task schedules and run in polynomial time, which allow them to scale well with the number of tasks and robots. TeSSI distributes the tasks among more robots in the fleet, while TeSSIduo tends to use a lower percentage of the available robots.
Subsequently, we have integrated TeSSI and TeSSIduo to perform multi-robot task allocation for the ROPOD project.
Large display environments are highly suitable for immersive analytics. They provide enough space for effective co-located collaboration and allow users to immerse themselves in the data. To provide the best setting - in terms of visualization and interaction - for the collaborative analysis of a real-world task, we have to understand the group dynamics during the work on large displays. Among other things, we have to study, what effects different task conditions will have on user behavior.
In this paper, we investigated the effects of task conditions on group behavior regarding collaborative coupling and territoriality during co-located collaboration on a wall-sized display. For that, we designed two tasks: a task that resembles the information foraging loop and a task that resembles the connecting facts activity. Both tasks represent essential sub-processes of the sensemaking process in visual analytics and cause distinct space/display usage conditions. The information foraging activity requires the user to work with individual data elements to look into details. Here, the users predominantly occupy only a small portion of the display. In contrast, the connecting facts activity requires the user to work with the entire information space. Therefore, the user has to overview the entire display.
We observed 12 groups for an average of two hours each and gathered qualitative data and quantitative data. During data analysis, we focused specifically on participants' collaborative coupling and territorial behavior.
We could detect that participants tended to subdivide the task to approach it, in their opinion, in a more effective way, in parallel. We describe the subdivision strategies for both task conditions. We also detected and described multiple user roles, as well as a new coupling style that does not fit in either category: loosely or tightly. Moreover, we could observe a territory type that has not been mentioned previously in research. In our opinion, this territory type can affect the collaboration process of groups with more than two collaborators negatively. Finally, we investigated critical display regions in terms of ergonomics. We could detect that users perceived some regions as less comfortable for long-time work.
In mathematical modeling by means of performance models, the Fitness-Fatigue Model (FF-Model) is a common approach in sport and exercise science to study the training performance relationship. The FF-Model uses an initial basic level of performance and two antagonistic terms (for fitness and fatigue). By model calibration, parameters are adapted to the subject’s individual physical response to training load. Although the simulation of the recorded training data in most cases shows useful results when the model is calibrated and all parameters are adjusted, this method has two major difficulties. First, a fitted value as basic performance will usually be too high. Second, without modification, the model cannot be simply used for prediction. By rewriting the FF-Model such that effects of former training history can be analyzed separately – we call those terms preload – it is possible to close the gap between a more realistic initial performance level and an athlete's actual performance level without distorting other model parameters and increase model accuracy substantially. Fitting error of the preload-extended FF-Model is less than 32% compared to the error of the FF-Model without preloads. Prediction error of the preload-extended FF-Model is around 54% of the error of the FF-Model without preloads.
Quantifying Interference in WiLD Networks using Topography Data and Realistic Antenna Patterns
(2019)
Avoiding possible interference is a key aspect to maximize the performance in Wi-Fi based Long Distance networks. In this paper we quantify self-induced interference based on data derived from our testbed and match the findings against simulations. By enhancing current simulation models with two key elements we significantly reduce the deviation between testbed and simulation: the usage of detailed antenna patterns compared to the cone model and propagation modeling enhanced by license-free topography data. Based on the gathered data we discuss several possible optimization approaches such as physical separation of local radios, tuning the sensitivity of the transmitter and using centralized compared to distributed channel assignment algorithms. While our testbed is based on 5 GHz Wi-Fi, we briefly discuss the possible impact of our results to other frequency bands.
Lower back pain is one of the most prevalent diseases in Western societies. A large percentage of European and American populations suffer from back pain at some point in their lives. One successful approach to address lower back pain is postural training, which can be supported by wearable devices, providing real-time feedback about the user’s posture. In this work, we analyze the changes in posture induced by postural training. To this end, we compare snapshots before and after training, as measured by the Gokhale SpineTracker™. Considering pairs of before and after snapshots in different positions (standing, sitting, and bending), we introduce a feature space, that allows for unsupervised clustering. We show that resulting clusters represent certain groups of postural changes, which are meaningful to professional posture trainers.
The choice of suitable semiconducting metal oxide (MOX) gas sensors for the detection of a specific gas or gas mixture is time-consuming since the sensor’s sensitivity needs to be characterized at multiple temperatures to find its optimal operating conditions. To obtain reliable measurement results, it is very important that the power for the sensor’s integrated heater is stable, regulated and error-free (or error-tolerant). Especially the error-free requirement can be only be achieved if the power supply implements failure-avoiding and failure-detection methods. The biggest challenge is deriving multiple different voltages from a common supply in an efficient way while keeping the system as small and lightweight as possible. This work presents a reliable, compact, embedded system that addresses the power supply requirements for fully automated simultaneous sensor characterization for up to 16 sensors at multiple temperatures. The system implements efficient (avg. 83.3% efficiency) voltage conversion with low ripple output (<32 mV) and supports static or temperature-cycled heating modes. Voltage and current of each channel are constantly monitored and regulated to guarantee reliable operation. To evaluate the proposed design, 16 sensors were screened. The results are shown in the experimental part of this work.
Verschiedene intelligente Heimautomatisierungsgeräte wie Lampen, Schlösser und Thermostate verbreiten sich rasant im privaten Umfeld. Ein typisches Kommunikationsprotokoll für diese Geräteklasse ist Bluetooth Low Energy (BLE). In dieser Arbeit wird eine strukturierte Sicherheitsanalyse für BLE vorgestellt. Die beschriebene Vorgehensweise kategorisiert bekannte Angriffsvektoren und beschreibt einen möglichen Aufbau für eine Analyse. Im Zuge dieser Arbeit wurden einige sicherheitsrelevante Probleme aufgedeckt, die es Angreifern ermöglichen die Geräte vollständig zu übernehmen. Es zeigte sich, dass im Standard vorgesehene Sicherheitsfunktionen wie Verschlüsselung und Integritätsprüfungen häufig gar nicht oder fehlerhaft implementiert sind.
Background: Virtual reality combined with spherical treadmills is used across species for studying neural circuits underlying navigation.
New Method: We developed an optical flow-based method for tracking treadmil ball motion in real-time using a single high-resolution camera.
Results: Tracking accuracy and timing were determined using calibration data. Ball tracking was performed at 500 Hz and integrated with an open source game engine for virtual reality projection. The projection was updated at 120 Hz with a latency with respect to ball motion of 30 ± 8 ms.
Comparison: with Existing Method(s) Optical flow based tracking of treadmill motion is typically achieved using optical mice. The camera-based optical flow tracking system developed here is based on off-the-shelf components and offers control over the image acquisition and processing parameters. This results in flexibility with respect to tracking conditions – such as ball surface texture, lighting conditions, or ball size – as well as camera alignment and calibration.
Conclusions: A fast system for rotational ball motion tracking suitable for virtual reality animal behavior across different scales was developed and characterized.
Interactive Object Detection
(2019)
The success of state-of-the-art object detection methods depend heavily on the availability of a large amount of annotated image data. The raw image data available from various sources are abundant but non-annotated. Annotating image data is often costly, time-consuming or needs expert help. In this work, a new paradigm of learning called Active Learning is explored which uses user interaction to obtain annotations for a subset of the dataset. The goal of active learning is to achieve superior object detection performance with images that are annotated on demand. To realize active learning method, the trade-off between the effort to annotate (annotation cost) unlabeled data and the performance of object detection model is minimised.
Random Forests based method called Hough Forest is chosen as the object detection model and the annotation cost is calculated as the predicted false positive and false negative rate. The framework is successfully evaluated on two Computer Vision benchmark and two Carl Zeiss custom datasets. Also, an evaluation of RGB, HoG and Deep features for the task is presented.
Experimental results show that using Deep features with Hough Forest achieves the maximum performance. By employing Active Learning, it is demonstrated that performance comparable to the fully supervised setting can be achieved by annotating just 2.5% of the images. To this end, an annotation tool is developed for user interaction during Active Learning.
Bond graph software can simulate bond graph models without the user needing to manually derive equations. This offers the power to model larger and more complex systems than in the past. Multibond graphs (those with vector bonds) offer a compact model which further eases handling multibody systems. Although multibond graphs can be simulated successfully, the use of vector bonds can present difficulties. In addition, most qualitative, bond graph–based exploitation relies on the use of scalar bonds. This article discusses the main methods for simulating bond graphs of multibody systems, using a graphical software platform. The transformation between models with vector and scalar bonds is presented. The methods are then compared with respect to both time and accuracy, through simulation of two benchmark models. This article is a tutorial on the existing methods for simulating three-dimensional rigid and holonomic multibody systems using bond graphs and discusses the difficulties encountered. It then proposes and adapts methods for simulating this type of system directly from its bond graph within a software package. The value of this study is in giving practical guidance to modellers, so that they can implement the adapted method in software.
The application of Raman and infrared (IR) microspectroscopy is leading to hyperspectral data containing complementary information concerning the molecular composition of a sample. The classification of hyperspectral data from the individual spectroscopic approaches is already state-of-the-art in several fields of research. However, more complex structured samples and difficult measuring conditions might affect the accuracy of classification results negatively and could make a successful classification of the sample components challenging. This contribution presents a comprehensive comparison in supervised pixel classification of hyperspectral microscopic images, proving that a combined approach of Raman and IR microspectroscopy has a high potential to improve classification rates by a meaningful extension of the feature space. It shows that the complementary information in spatially co-registered hyperspectral images of polymer samples can be accessed using different feature extraction methods and, once fused on the feature-level, is in general more accurately classifiable in a pattern recognition task than the corresponding classification results for data derived from the individual spectroscopic approaches.