Refine
H-BRS Bibliography
- yes (42)
Departments, institutes and facilities
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (42) (remove)
Document Type
- Conference Object (29)
- Article (8)
- Report (4)
- Preprint (1)
Year of publication
Keywords
- Quality diversity (4)
- MAP-Elites (3)
- Quality Diversity (3)
- Aerodynamics (2)
- Bayesian optimization (2)
- Evolutionary computation (2)
- Heart Rate Prediction (2)
- Neuroevolution (2)
- Surrogate Modeling (2)
- UAV (2)
Analyzing training performance in sport is usually based on standardized test protocols and needs laboratory equipment, e.g., for measuring blood lactate concentration or other physiological body parameters. Avoiding special equipment and standardized test protocols, we show that it is possible to reach a quality of performance simulation comparable to the results of laboratory studies using training models with nothing but training data. For this purpose, we introduce a fitting concept for a performance model that takes the peculiarities of using training data for the task of performance diagnostics into account. With a specific way of data preprocessing, accuracy of laboratory studies can be achieved for about 50% of the tested subjects, while lower correlation of the other 50% can be explained.
The Fitness-Fatigue model (Calvert et al. 1976) is widely used for performance analysis. This antagonistic model is based on a fitness-term, a fatigue-term, and an initial basic level of performance. Instead of generic parameter values, individualizing the model needs a fitting of parameters. With fitted parameters, the model adapts to account for individual responses to strain. Even though in most cases fitting of recorded training data shows useful results, without modification the model cannot be simply used for prediction.
With the increasing average age of the population in many developed countries, afflictions like cardiovascular diseases have also increased. Exercising has a proven therapeutic effect on the cardiovascular system and can counteract this development. To avoid overstrain, determining an optimal training dose is crucial. In previous research, heart rate has been shown to be a good measure for cardiovascular behavior. Hence, prediction of the heart rate from work load information is an essential part in models used for training control. Most heart-rate-based models are described in the context of specific scenarios, and have been evaluated on unique datasets only. In this paper, we conduct a joint evaluation of existing approaches to model the cardiovascular system under a certain strain, and compare their predictive performance. For this purpose, we investigated some analytical models as well as some machine learning approaches in two scenarios: prediction over a certain time horizon into the future, and estimation of the relation between work load and heart rate over a whole training session.
The initial phase in real world engineering optimization and design is a process of discovery in which not all requirements can be made in advance, or are hard to formalize. Quality diversity algorithms, which produce a variety of high performing solutions, provide a unique chance to support engineers and designers in the search for what is possible and high performing. In this work we begin to answer the question how a user can interact with quality diversity and turn it into an interactive innovation aid. By modeling a user's selection it can be determined whether the optimization is drifting away from the user's preferences. The optimization is then constrained by adding a penalty to the objective function. We present an interactive quality diversity algorithm that can take into account the user's selection. The approach is evaluated in a new multimodal optimization benchmark that allows various optimization tasks to be performed. The user selection drift of the approach is compared to a state of the art alternative on both a planning and a neuroevolution control task, thereby showing its limits and possibilities.
Aufgrund eines nahezu gleichlautenden Beschlusses des Kreistages im Rhein-Sieg-Kreis (RSK) und des Hauptausschusses der Stadt Bonn im Jahr 2011 wurden die jeweiligen Verwaltungen beauftragt, gemeinsam mit den Energieversorgern der Region ein Starthilfekonzept Elektromobilität zu entwickeln. In Folge dieses Beschlusses konstituierte sich Ende 2011 ein Arbeitskreis, der aus den Verwaltungen des Rhein-Sieg-Kreises und der Stadt Bonn, den Energieversorgern SWB Energie und Wasser, der Rhenag, den Stadtwerken Troisdorf, der Rheinenergie und den RWE besteht. Die inhaltlichen Schwerpunkte, die inzwischen in drei Arbeitskreisen behandelt werden, umfassen den Ausbau der Ladeinfrastruktur, die Öffentlichkeitsarbeit und die Bereitstellung von Strom aus regenerativen Quellen durch den Zubau entsprechender Anlagen in der Region. Während Maßnahmen zur Öffentlichkeitsarbeit und die Bereitstellung Grünen Stroms aus den Arbeitskreisen direkt bearbeitet und bewegt werden, ist dies aufgrund der Komplexität des Themas und der zahlreichen Einflussgrößen beim Ausbau der Ladeinfrastruktur nicht möglich. Daraus entstand die Überlegung einer Kooperation mit der Hochschule Bonn-Rhein-Sieg.
The use of wearable devices or “wearables” in the physical activity domain has been increasing in the last years. These devices are used as training tools providing the user with detailed information about individual physiological responses and feedback to the physical training process. Advantages in sensor technology, miniaturization, energy consumption and processing power increased the usability of these wearables. Furthermore, available sensor technologies must be reliable, valid, and usable. Considering the variety of the existing sensors not all of them are suitable to be integrated in wearables. The application and development of wearables has to consider the characteristics of the physical training process to improve the effectiveness and efficiency as training tools. During physical training, it is essential to elicit individual optimal strain to evoke the desired adjustments to training. One important goal is to neither overstrain nor under challenge the user. Many wearables use heart rate as indicator for this individual strain. However, due to a variety of internal and external influencing factors, heart rate kinetics are highly variable making it difficult to control the stress eliciting individually optimal strain. For optimal training control it is essential to model and predict individual responses and adapt the external stress if necessary. Basis for this modeling is the valid and reliable recording of these individual responses. Depending on the heart rate kinetics and the obtained physiological data, different models and techniques are available that can be used for strain or training control. Aim of this review is to give an overview of measurement, prediction, and control of individual heart rate responses. Therefore, available sensor technologies measuring the individual heart rate responses are analyzed and approaches to model and predict these individual responses discussed. Additionally, the feasibility for wearables is analyzed.
Künstliche Intelligenz (KI) ist aus der heutigen Gesellschaft kaum noch wegzudenken. Auch im Sport haben Methoden der KI in den letzten Jahren mehr und mehr Einzug gehalten. Ob und inwieweit dabei allerdings die derzeitigen Potenziale der KI tatsächlich ausgeschöpft werden, ist bislang nicht untersucht worden. Der Nutzen von Methoden der KI im Sport ist unbestritten, jedoch treten bei der Umsetzung in die Praxis gravierende Probleme auf, was den Zugang zu Ressourcen, die Verfügbarkeit von Experten und den Umgang mit den Methoden und Daten betrifft. Die Ursache für die, verglichen mit anderen Anwendungsgebieten, langsame An- bzw. Übernahme von Methoden der KI in den Spitzensport ist nach Hypothese des Autorenteams auf mehrere Mismatches zwischen dem Anwendungsfeld und den KI-Methoden zurückzuführen. Diese Mismatches sind methodischer, struktureller und auch kommunikativer Art. In der vorliegenden Expertise werden Vorschläge abgeleitet, die zur Auflösung der Mismatches führen können und zugleich neue Transfer- und Synergiemöglichkeiten aufzeigen. Außerdem wurden drei Use Cases zu Trainingssteuerung, Leistungsdiagnostik und Wettkampfdiagnostik exemplarisch umgesetzt. Dies erfolgte in Form entsprechender Projektbeschreibungen. Dabei zeigt die Ausarbeitung, auf welche Art und Weise Probleme, die heute noch bei der Verbindung zwischen KI und Sport bestehen, möglichst ausgeräumt werden können. Eine empirische Umsetzung des Use Case Trainingssteuerung erfolgte im Radsport, weshalb dieser ausführlicher dargestellt wird.
In mathematical modeling by means of performance models, the Fitness-Fatigue Model (FF-Model) is a common approach in sport and exercise science to study the training performance relationship. The FF-Model uses an initial basic level of performance and two antagonistic terms (for fitness and fatigue). By model calibration, parameters are adapted to the subject’s individual physical response to training load. Although the simulation of the recorded training data in most cases shows useful results when the model is calibrated and all parameters are adjusted, this method has two major difficulties. First, a fitted value as basic performance will usually be too high. Second, without modification, the model cannot be simply used for prediction. By rewriting the FF-Model such that effects of former training history can be analyzed separately – we call those terms preload – it is possible to close the gap between a more realistic initial performance level and an athlete's actual performance level without distorting other model parameters and increase model accuracy substantially. Fitting error of the preload-extended FF-Model is less than 32% compared to the error of the FF-Model without preloads. Prediction error of the preload-extended FF-Model is around 54% of the error of the FF-Model without preloads.
The MAP-Elites algorithm produces a set of high-performing solutions that vary according to features defined by the user. This technique has the potential to be a powerful tool for design space exploration, but is limited by the need for numerous evaluations. The Surrogate-Assisted Illumination algorithm (SAIL), introduced here, integrates approximative models and intelligent sampling of the objective function to minimize the number of evaluations required by MAP-Elites.
The ability of SAIL to efficiently produce both accurate models and diverse high performing solutions is illustrated on a 2D airfoil design problem. The search space is divided into bins, each holding a design with a different combination of features. In each bin SAIL produces a better performing solution than MAP-Elites, and requires several orders of magnitude fewer evaluations. The CMA-ES algorithm was used to produce an optimal design in each bin: with the same number of evaluations required by CMA-ES to find a near-optimal solution in a single bin, SAIL finds solutions of similar quality in every bin.
We consider multi-solution optimization and generative models for the generation of diverse artifacts and the discovery of novel solutions. In cases where the domain's factors of variation are unknown or too complex to encode manually, generative models can provide a learned latent space to approximate these factors. When used as a search space, however, the range and diversity of possible outputs are limited to the expressivity and generative capabilities of the learned model. We compare the output diversity of a quality diversity evolutionary search performed in two different search spaces: 1) a predefined parameterized space and 2) the latent space of a variational autoencoder model. We find that the search on an explicit parametric encoding creates more diverse artifact sets than searching the latent space. A learned model is better at interpolating between known data points than at extrapolating or expanding towards unseen examples. We recommend using a generative model's latent space primarily to measure similarity between artifacts rather than for search and generation. Whenever a parametric encoding is obtainable, it should be preferred over a learned representation as it produces a higher diversity of solutions.
Neuroevolution methods evolve the weights of a neural network, and in some cases the topology, but little work has been done to analyze the effect of evolving the activation functions of individual nodes on network size, an important factor when training networks with a small number of samples. In this work we extend the neuroevolution algorithm NEAT to evolve the activation function of neurons in addition to the topology and weights of the network. The size and performance of networks produced using NEAT with uniform activation in all nodes, or homogenous networks, is compared to networks which contain a mixture of activation functions, or heterogenous networks. For a number of regression and classification benchmarks it is shown that, (1) qualitatively different activation functions lead to different results in homogeneous networks, (2) the heterogeneous version of NEAT is able to select well performing activation functions, (3) the produced heterogeneous networks are significantly smaller than homogeneous networks.