Refine
H-BRS Bibliography
- yes (59) (remove)
Departments, institutes and facilities
- Fachbereich Angewandte Naturwissenschaften (59) (remove)
Document Type
- Article (45)
- Part of a Book (4)
- Conference Object (3)
- Doctoral Thesis (3)
- Research Data (2)
- Contribution to a Periodical (1)
- Report (1)
Year of publication
- 2022 (59) (remove)
Keywords
- Lignin (3)
- Cathepsin K (2)
- Chemometrics (2)
- SERS (2)
- azadipeptide nitrile (2)
- creep (2)
- cyanohydrazide warhead (2)
- cytokine-induced killer cells (2)
- immunotherapy (2)
- protease inhibitor (2)
Cytokine-induced killer cells (CIK) in combination with dendritic cells (DCs) have shown favorable outcomes in renal cell carcinoma (RCC), yet some patients exhibit recurrence or no response to this therapy. In a broader perspective, enhancing the antitumor response of DC-CIK cells may help to address this issue. Considering this, herein, we investigated the effect of anti-CD40 and anti-CTLA-4 antibodies on the antitumor response of DC-CIK cells against RCC cell lines. Our analysis showed that, a) anti-CD40 antibody (G28.5) increased the CD3+CD56+ effector cells of CIK cells by promoting the maturation and activation of DCs, b) G28.5 also increased CTLA-4 expression in CIK cells via DCs, but the increase could be hindered by the CTLA-4 inhibitor (ipilimumab), c) adding ipilimumab was also able to significantly increase the proportion of CD3+CD56+ cells in DC-CIK cells, d) anti-CD40 antibodies predominated over anti-CTLA-4 antibodies for cytotoxicity, apoptotic effect and IFN-g secretion of DC-CIK cells against RCC cells, e) after ipilimumab treatment, the population of Tregs in CIK cells remained unaffected, but ipilimumab combined with G28.5 significantly reduced the expression of CD28 in CIK cells. Taken together, we suggest that the agonistic anti-CD40 antibody rather than CTLA-4 inhibitor may improve the antitumor response of DC-CIK cells, particularly in RCC. In addition, we pointed towards the yet to be known contribution of CD28 in the crosstalk between anti-CTLA-4 and CIK cells.
When the Artemis missions launch, NASA's Orion spacecraft (and crew as of the Artemis II mission) will be exposed to the deep space radiation environment beyond the protection of Earth's magnetosphere. Hence, it is essential to characterize the effects of space radiation, microgravity, and the combination thereof on cells and organisms, i.e., to quantify any correlations between the deep space radiation environment, genetic variation, and induced genetic changes in cells. To address this, the Artemis I mission will include the Peristaltic Laboratory for Automated Science with Multigenerations (PLASM) hardware containing the Deep Space Radiation Genomics (DSRG) experiment. The scientific aims of DSRG are (i) to identify the metabolic and genomic pathways in yeast affected by microgravity, space radiation, and their combination, and (ii) to differentiate between gravity and radiation exposure on single-gene deletion/overexpressing strains' ability to thrive in the spaceflight environment. Yeast is used as a model system because 70% of its essential genes have a human homolog, and over half of these homologs can functionally replace their human counterpart. As part of the experiment preparation towards spaceflight, an Experiment Verification Test (EVT) was performed at the Kennedy Space Center to verify that the experiment design, hardware, and approach to automated operations will enable achieving the scientific aims. For the EVT, fluidic systems were assembled, sterilized, loaded, and acceptance-tested, and subsequently integrated with the engineering parts to produce a flight-like PLASM unit. Each fluidic system consisted of (i) a Media Bag, (ii) four Culture Bags loaded with Saccharomyces cerevisiae (two with deletion series and the remaining two with overexpression series), and (iii) tubing and check valves. The EVT PLASM unit was put under a temperature profile replicating the anticipated different phases of flight, including handover to launch, spaceflight, and splashdown to handover back to the science team, for a 58-day period. At EVT completion, the rate of activation, cellular growth, RNA integrity, and sample contamination were interrogated. All of the experiment's success criteria were satisfied, encouraging our efforts to perform this investigation on Artemis I. This manuscript thus describes the process of spaceflight experiment design maturation with a focus on the EVT, its results, DSRG's preparation for its planned launch on Artemis I in 2022, and how the PLASM hardware can enable other scientific goals on future Artemis missions and/or the Lunar Orbital Platform – Gateway.
Approximately 45% of global greenhouse gas emissions are caused by the construction and use of buildings. Thermal insulation of buildings in the current context of climate change is a well-known strategy to improve the energy efficiency of buildings. The development of renewable insulation material can overcome the drawbacks of widely used insulation systems based on polystyrene or mineral wool. This study analyzes the sustainability and thermal conductivity of new insulation materials made of Miscanthus x giganteus fibers, foaming agents, and alkali-activated fly ash binder. Life cycle assessments (LCA) are necessary to perform benchmarking of environmental impacts of new formulations of geopolymer-based insulation materials. The global warming potential (GWP) of the product is primarily determined by the main binder component sodium silicate. Sodium silicate's CO2 emissions depend on local production, transportation, and energy consumption. The results, which have been published during recent years, vary in a wide range from 0.3 kg to 3.3 kg CO2-eq. kg-1. The overall GWP of the insulation system based on Miscanthus fibers, with properties according to current thermal insulation regulations, reaches up to 95% savings of CO2 emissions compared to conventional systems. Carbon neutrality can be achieved through formulations containing raw materials with carbon dioxide emissions and renewable materials with negative GWP, thus balancing CO2 emissions.
Sensoren können verschiedene Aufgaben erfüllen, wie beispielsweise die Optimierung von Prozessen, die Interaktion zwischen Geräten oder die Verbesserung der zivilen Sicherheit. [1–3] Ihr Bedarf für die Industrie oder den Alltag wächst seit Jahren stetig. Besonders mobile Gassensoren sind von großem Interesse. Jedoch ist ihre Anwendung meist durch ihre integrierte Batterie begrenzt. Gassensoren ohne oder mit einem nur sehr geringen Energieverbrauch stehen daher im Interesse bei neuen Anwendungsgebieten, beispielsweise im Brandschutz oder in der Textilindustrie. [4,5] Die Sensoren könnten zum Beispiel in die Textilien einer persönlichen Schutzausrüstung eingearbeitet werden und durch einen Farbumschlag die Anwesenheit eines Gases oder die Überschreitung des Grenzwertes toxischer Substanzen anzeigen.
Therapeutic Treatments for Osteoporosis-Which Combination of Pills Is the Best among the Bad?
(2022)
Osteoporosis is a chronical, systemic skeletal disorder characterized by an increase in bone resorption, which leads to reduced bone density. The reduction in bone mineral density and therefore low bone mass results in an increased risk of fractures. Osteoporosis is caused by an imbalance in the normally strictly regulated bone homeostasis. This imbalance is caused by overactive bone-resorbing osteoclasts, while bone-synthesizing osteoblasts do not compensate for this. In this review, the mechanism is presented, underlined by in vitro and animal models to investigate this imbalance as well as the current status of clinical trials. Furthermore, new therapeutic strategies for osteoporosis are presented, such as anabolic treatments and catabolic treatments and treatments using biomaterials and biomolecules. Another focus is on new combination therapies with multiple drugs which are currently considered more beneficial for the treatment of osteoporosis than monotherapies. Taken together, this review starts with an overview and ends with the newest approaches for osteoporosis therapies and a future perspective not presented so far.
With the increasing demand for ultrapure water in the pharmaceutical and semiconductor industry, the need for precise measuring instruments for those applications is also growing. One critical parameter of water quality is the amount of total organic carbon (TOC). This work presents a system that uses the advantage of the increased oxidation power achieved with UV/O3 advanced oxidation process (AOP) for TOC measurement in combination with a significant miniaturization compared to the state of the art. The miniaturization is achieved by using polymer-electrolyte membrane (PEM) electrolysis cells for ozone generation in combination with UV-LEDs for irradiation of the measuring solution, as both components are significantly smaller than standard equipment. Conductivity measurement after oxidation is the measuring principle and measurements were carried out in the TOC range between 10 and 1000 ppb TOC. The suitability of the system for TOC measurement is demonstrated using the oxidation by ozonation combined with UV irradiation of defined concentrations of isopropyl alcohol (IPA).
The human enzymes GLYAT (glycine N-acyltransferase), GLYATL1 (glutamine N-phenylacetyltransferase) and GLYATL2 (glycine N-acyltransferase-like protein 2) are not only important in the detoxification of xenobiotics via the human liver, but are also involved in the elimination of acyl residues that accumulate in the form of their coenzyme A (coA) esters in some rare inborn errors of metabolism. This concerns, for example, disorders in the degradation of branched-chain amino acids, such as isovaleric acidemia or propionic acidemia. In addition, they also assist in the elimination of ammonium, which is produced during the transamination of amino acids and accumulates in urea cycle defects. Sequence variants of the enzymes have also been investigated, which may provide evidence of impaired enzyme activities, from which therapy adjustments can potentially be derived. A modified Escherichia coli strain was chosen for the overexpression and partial biochemical characterization of the enzymes, which may allow solubility and proper folding. Since post-translational protein modifications are very limited in bacteria, we also attempted to overexpress the enzymes in HEK293 cells (human-derived). In addition to characterization via immunoblots and activity assays, intracellular localization of the enzymes was also performed using GFP coupling and confocal laser scanning microscopy in transfected HEK293 cells. The GLYATL2 enzyme may have tasks beyond detoxification and metabolic defects and the preliminary molecular biology work has been performed as part of this project - the enzyme activity determinations were outsourced to a co-supervised bachelor thesis. The enzyme activity determinations with purified recombinant human enzyme from Escherichia coli provided a threefold higher activity of the sequence variant p.(Asn156Ser) for GLYAT, which should be considered as the probably authentic wild type of the enzyme. In addition, a reduced activity of the GLYAT variant p.(Gln61Leu), which is very common in South Africa, was shown, which could be of particular importance in the treatment of isovaleric acidemia, which is also common in South Africa. Intracellularly, GLYAT and GLYATL1 could be localized mitochondrially. As the analyses have shown, sequence variations of GLYAT and GLYATL1 influence their enzyme activity. As an example, the GLYAT variant p.(Gln61Leu) is frequently found in South Africa. In the case of reduced GLYAT activity, patients could be increasingly treated with L-carnitine in the sense of an individualized therapy, since the conjugation of the toxic isovaleryl-coA with glycine is restricted by the GLYAT sequence variation. Activity-reducing variants identified in this project are of particular interest, as they may influence the treatment of certain metabolic defects.
A main factor hampering life in space is represented by high atomic number nuclei and energy (HZE) ions that constitute about 1% of the galactic cosmic rays. In the frame of the “STARLIFE” project, we accessed the Heavy Ion Medical Accelerator (HIMAC) facility of the National Institute of Radiological Sciences (NIRS) in Chiba, Japan. By means of this facility, the extremophilic species Haloterrigena hispanica and Parageobacillus thermantarcticus were irradiated with high LET ions (i.e., Fe, Ar, and He ions) at doses corresponding to long permanence in the space environment. The survivability of HZE-treated cells depended upon either the storage time and the hydration state during irradiation; indeed, dry samples were shown to be more resistant than hydrated ones. With particular regard to spores of the species P. thermantarcticus, they were the most resistant to irradiation in a water medium: an analysis of the changes in their biochemical fingerprinting during irradiation showed that, below the survivability threshold, the spores undergo to a germination-like process, while for higher doses, inactivation takes place as a consequence of the concomitant release of the core’s content and a loss of integrity of the main cellular components. Overall, the results reported here suggest that the selected extremophilic microorganisms could serve as biological model for space simulation and/or real space condition exposure, since they showed good resistance to ionizing radiation exposure and were able to resume cellular growth after long-term storage.
Modeling of Creep Behavior of Particulate Composites with Focus on Interfacial Adhesion Effect
(2022)
Evaluation of creep compliance of particulate composites using empirical models always provides parameters depending on initial stress and material composition. The effort spent to connect model parameters with physical properties has not resulted in success yet. Further, during the creep, delamination between matrix and filler may occur depending on time and initial stress, reducing an interface adhesion and load transfer to filler particles. In this paper, the creep compliance curves of glass beads reinforced poly(butylene terephthalate) composites were fitted with Burgers and Findley models providing different sets of time-dependent model parameters for each initial stress. Despite the finding that the Findley model performs well in a primary creep, the Burgers model is more suitable if secondary creep comes into play; they allow only for a qualitative prediction of creep behavior because the interface adhesion and its time dependency is an implicit, hidden parameter. As Young’s modulus is a parameter of these models (and the majority of other creep models), it was selected to be introduced as a filler content-dependent parameter with the help of the cube in cube elementary volume approach of Paul. The analysis led to the time-dependent creep compliance that depends only on the time-dependent creep of the matrix and the normalized particle distance (or the filler volume content), and it allowed accounting for the adhesion effect. Comparison with the experimental data confirmed that the elementary volume-based creep compliance function can be used to predict the realistic creep behavior of particulate composites.
Introduction of Matrix-Filler Adhesion to Modelling of Elastic Moduli of Particulate Composites
(2022)
Cube in cube elementary volume (EV) concept serves to predict a filler-content dependent Young´s moduli of particle filled composites using moduli of a matrix EM and a filler EF. Paul and Ishai-Cohen derived formulas for composites moduli considering different load transfer boundaries in the EV assuming a complete filler-matrix adhesion. In this paper it is confirmed that their models represent the upper and lower bounds, respectively, with the respect to the experimental data. However, in vast majority of composites a filler-matrix adhesion is not complete. Therefore, an adhesion factor kadh gaining values between 0 and 1 was introduced into Paul´s model to consider the reduced adhesion as the reduction of the filler-matrix contact area for glass beads filled in polar and unpolar thermoplastic matrices as well as elastomer. The evaluation of these composite systems provides reasonable adhesion coefficients of PA66 > PBT > PP > PE-LD >> BR. It was also found that stiffening only occurs if kadh exceeds the minimum value adhesion of root square of E(M) divided by E(F). The determined kadh correspond to scanning electron microscopy observations of the composites fracture surfaces. Additionally, finite element analysis of the cubic and hexagonal arrangements of the EV show that the stress distributions are different, but they affect the calculated moduli only for the filler volume contents exceeding 20 %. The introduction of the filler-matrix adhesion provides more reliable predictions of Young´s moduli of particulate composites.
A precise characterization of substances is essential for the safe handling of explosives. One parameter regularly characterized is the impact sensitivity. This is typically determined using a drop hammer. However, the results can vary depending on the test method and even the operator, and it is not possible to distinguish the type of decomposition such as detonation and deflagration. This study monitors the reaction progress by constructing a drop hammer to measure the decomposition reaction of four different primary explosives (tetrazene, silver azide, lead azide, lead styphnate) in order to determine the reproducibility of this method. Additionally, further possible evaluation methods are explored to improve on the current binary statistical analysis. To determine whether classification was possible based on extracted features, the responses of equipped sensor arrays, which measure and monitor the reactions, were studied and evaluated. Features were extracted from this data and were evaluated using multivariate methods such as principal component analysis (PCA) and linear discriminant analysis (LDA). The results indicate that although the measurements show substance specific trends, they also show a large scatter for each substance. By reducing the dimensions of the extracted features, different sample clusters can be represented and the calculated loadings allow significant parameters to be determined for classification. The results also suggest that differentiation of different reaction mechanisms is feasible. Testing of the regressor function shows reliable results considering the comparatively small amount of data.
Bonding wires made of aluminum are the most used materials for the transmission of electrical signals in power electronic devices. During operation, different cyclic mechanical and thermal stresses can lead to fatigue loads and a failure of the bonding wires. A prediction or prevention of the wire failure is not yet possible by design for all cases. The following work presents meaningful fatigue tests in small wire dimensions and investigates the influence of the R-ratio on the lifetime of two different aluminum wires with a diameter of 300 μm each. The experiments show very reproducible fatigue results with ductile failure behavior. The endurable stress amplitude decreases linearly with an increasing stress ratio, which can be displayed by a Smith diagram, even though the applied maximum stresses exceed the initial yield stresses determined by tensile tests. A scaling of the fatigue results by the tensile strength indicates that the fatigue level is significantly influenced by the strength of the material. Due to the very consistent findings, the development of a generalized fatigue model for predicting the lifetime of bonding wires with an arbitrary loading situation seems to be possible and will be further investigated.
The utilization of simulation procedures is gaining increasing attention in the product development of extrusion blow molded parts. However, some simulation steps, like the simulation of shrinkage and warpage, are still associated with uncertainties. The reason for this is on the one hand a lack of standardized interfaces for the transfer of simulation data between different simulation tools, and on the other hand the complex time-, temperature- and process-dependent material behavior of the used semi crystalline polymers. Using a new vendor neutral interface standard for the data transfer, the shrinkage analysis of a simple blow molded part is investigated and compared to experimental data. A linear viscoelastic material model in combination with an orthotropic process- and temperature-dependent thermal expansion coefficient is used for the shrinkage prediction. A good agreement is observed. Finally, critical parameters in the simulation models that strongly influence the shrinkage analysis are identified by a sensitivity study.
Characterization methods of pressure sensitive adhesives (PSA) originate from technical bonding and do not cover relevant data for the development and quality assurance of medical applications, where PSA with flexible backing layers are adopted to human skin. In this study, a new method called RheoTack is developed to determine (mechanically and optically) an adhesion and detaching behavior of flexible and transparent PSA based patches. Transdermal therapeutic systems (TTS) consisting of silicone-based PSAs on a flexible and transparent backing layer were tested on a rotational rheometer with an 8 mm plate as a probe rod at retraction speeds of 0.01, 0.1, and 1 mm/s with respect to their adhesion and detaching behavior in terms of force-retraction displacement curves. The curves consist of a compression phase to affirm wetting; a tensile deformation phase intercepting stretching, cavity, and fibril formation; and a failure phase with detaching. Their analysis provides values for stiffness, force, and displacement of the beginning of fibril formation, force and displacement of the beginning of a failure due to fibril breakage and detaching, as well as corresponding activation energies. All these parameters exhibit the pronounced dependency on the retraction speed. The force-retraction displacement curves together with the simultaneous video recordings of the TTS deformation from three different angles (three cameras) provide deeper insight into the deformation processes and allow for interpreting the properties’ characteristics for PSA applications.
Hydrogen‐Bonded Cholesteric Liquid Crystals—A Modular Approach Toward Responsive Photonic Materials
(2022)
A supramolecular approach for photonic materials based on hydrogen-bonded cholesteric liquid crystals is presented. The modular toolbox of low-molecular-weight hydrogen-bond donors and acceptors provides a simple route toward liquid crystalline materials with tailor-made thermal and photonic properties. Initial studies reveal broad application potential of the liquid crystalline thin films for chemo- and thermosensing. The chemosensing performance is based on the interruption of the intermolecular forces between the donor and acceptor moieties by interference with halogen-bond donors. Future studies will expand the scope of analytes and sensing in aqueous media. In addition, the implementation of the reported materials in additive manufacturing and printed photonic devices is planned.
There is an unmet need for the development and validation of biomarkers and surrogate endpoints for clinical trials in propionic acidemia (PA) and methylmalonic acidemia (MMA). This review examines the pathophysiology and clinical consequences of PA and MMA that could form the basis for potential biomarkers and surrogate endpoints. Changes in primary metabolites such as methylcitric acid (MCA), MCA:citric acid ratio, oxidation of 13C-propionate (exhaled 13CO2), and propionylcarnitine (C3) have demonstrated clinical relevance in patients with PA or MMA. Methylmalonic acid, another primary metabolite, is a potential biomarker, but only in patients with MMA. Other potential biomarkers in patients with either PA and MMA include secondary metabolites, such as ammonium, or the mitochondrial disease marker, fibroblast growth factor 21. Additional research is needed to validate these biomarkers as surrogate endpoints, and to determine whether other metabolites or markers of organ damage could also be useful biomarkers for clinical trials of investigational drug treatments in patients with PA or MMA. This review examines the evidence supporting a variety of possible biomarkers for drug development in propionic and methylmalonic acidemias.
Background: Cancer heterogeneity poses a serious challenge concerning the toxicity and adverse effects of therapeutic inhibitors, especially when it comes to combinatorial therapies that involve multiple targeted inhibitors. In particular, in non-small cell lung cancer (NSCLC), a number of studies have reported synergistic effects of drug combinations in the preclinical models, while they were only partially successful in the clinical setup, suggesting those alternative clinical strategies (with genetic background and immune response) should be considered. Herein, we investigated the antitumor effect
of cytokine-induced killer (CIK) cells in combination with ALK and PD-1 inhibitors in vitro on genetically variable NSCLC cell lines.
Methods: We co-cultured the three genetically different NSCLC cell lines NCI-H2228 (EML4-ALK), A549 (KRAS mutation), and HCC-78 (ROS1 rearrangement) with and without nivolumab (PD-1 inhibitor) and crizotinib (ALK inhibitor). Additionally, we profiled the variability of surface expression multiple immune checkpoints, the concentration of absolute dead cells, intracellular granzyme B on CIK cells using flow cytometry as well as RT-qPCR. ELISA and Western blot were performed to verify the activation of CIK cells.
Results: Our analysis showed that (a) nivolumab significantly weakened PD-1 surface expression on CIK cells without impacting other immune checkpoints or PD-1 mRNA expression, (b) this combination strategy showed an effective response on cell viability, IFN-g production, and intracellular release of granzyme B in CD3+ CD56+ CIK cells, but solely in NCI-H2228, (c) the intrinsic expression of Fas ligand (FasL) as a T-cell activation marker in CIK cells was upregulated by this additive effect, and (d) nivolumab induced Foxp3 expression in CD4+CD25+ subpopulation of CIK cells significantly increased. Taken together, we could show that CIK cells in combination with crizotinib and nivolumab can enhance the anti-tumor immune response through FasL activation, leading to increased IFN-g and granzyme B, but only in NCI-H2228 cells with EML4-ALK rearrangement. Therefore, we hypothesize that CIK therapy may be a potential alternative in NSCLC patients harboring EML4-ALK rearrangement, in addition, we support the idea that combination therapies offer significant potential when they are optimized on a patient-by-patient basis.
Silicon carbide and graphene possess extraordinary chemical and physical properties. Here, these different systems are linked and the changes in structural and dynamic properties are investigated. For the simulations performed a classical molecular dynamic (MD) approach was used. In this approach, a graphene layer (N = 240 atoms) was grafted at different distances on top of a 6H-SiC structure (N = 2400 atoms) and onto a 3C-SiC structure (N = 1728 atoms). The distances between the graphene and the 6H are 1.0, 1.3 and 1.5 Å and the distances between the graphene layer and the 3C-SiC are 2.0, 2.3, and 2.5 Å. Each system has been equilibrated at room temperature until no further relaxation was observed. The 6H-SiC structure in combination with graphene proves to be more stable compared to the combination with 3C-SiC. This can be seen well in the determined energies. Pair distribution functions were influenced slightly by the graphene layer due to steric and energetic changes. This becomes clear from the small shifts of the C-C distances. Interactions as well as bonds between graphene and SiC lead to the fact that small shoulders of the high-frequency SiC-peaks are visible in the spectra and at the same time the high-frequency peaks of graphene are completely absent.