Refine
H-BRS Bibliography
- yes (577) (remove)
Departments, institutes and facilities
- Fachbereich Angewandte Naturwissenschaften (577) (remove)
Document Type
- Article (356)
- Conference Object (75)
- Part of a Book (58)
- Doctoral Thesis (26)
- Book (monograph, edited volume) (21)
- Report (20)
- Contribution to a Periodical (6)
- Preprint (5)
- Research Data (4)
- Conference Proceedings (2)
Year of publication
Has Fulltext
- no (577) (remove)
Keywords
- GC/MS (8)
- Lehrbuch (8)
- Lignin (8)
- Chemie (6)
- Biomass (5)
- Chemometrics (5)
- Analytical pyrolysis (4)
- CD21 (4)
- Chromatography (4)
- Corrosion inhibitors (4)
Due to the use of fossil fuel resources, many environmental problems have been increasingly growing. Thus, the recent research focuses on the use of environment friendly materials from sustainable feedstocks for future fuels, chemicals, fibers and polymers. Lignocellulosic biomass has become the raw material of choice for these new materials. Recently, the research has focused on using lignin as a substitute material in many industrial applications. The antiradical and antimicrobial activity of lignin and lignin-based films are both of great interest for applications such as food packaging additives. DPPH assay was used to determine the antioxidant activity of Kraft lignin compared to Organosolv lignins from different biomasses. The purification procedure of Kraft lignin showed that double-fold selective extraction is the most efficient confirmed by UV-Vis, FTIR, HSQC, 31PNMR, SEC, and XRD. The antioxidant capacity was discussed regarding the biomass source, pulping process, and degree of purification. Lignin obtained from industrial black liquor are compared with beech wood samples: Biomass source influences the DPPH inhibition (softwood > grass) and the TPC (softwood < grass). DPPH inhibition affected by the polarity of the extraction solvent. Following the trend: ethanol > diethylether > acetone. Reduced polydispersity has positive influence on the DPPH inhibition. Storage decreased the DPPH inhibition but increased the TPC values. The DPPH assay was also used to discuss the antiradical activity of HPMC/lignin and HPMC/lignin/chitosan films. In both binary (HPMC/lignin) and ternary (HPMC/lignin/chitosan) systems the 5% addition showed the highest activity and the highest addition had the lowest. Both scavenging activity and antimicrobial activity are dependent on the biomass source; Organosolv of softwood > Kraft of softwood > Organosolv of grass. Lignins and lignin-containing films showed high antimicrobial activities against Gram-positive and Gram-negative bacteria at 35 °C and at low temperatures (0-7 °C). Purification of Kraft lignin has a negative effect on the antimicrobial activity while storage has positive effect. The lignin leaching in the produced films affected the activity positively and the chitosan addition enhances the activity for both Gram-positive and Gram-negative bacteria. Testing the films against food spoilage bacteria that grow at low temperatures revealed the activity of the 30% addition on HPMC/L1 film against both B. thermosphacta and P. fluorescens while L5 was active only against B. thermosphacta. In HPMC/lignin/chitosan films, the 5% addition exhibited activity against both food spoilage bacteria.
ENaC channels
(2023)
Introduction: After cellulose, lignin represents the most abundant biopolymer on earth that accounts for up to 18-35 % by weight of lignocellulose biomass. Today, it is a by-product of the paper and pulping industry. Although lignin is available in huge amounts, mainly in form of so called black liquor produced via Kraft-pulping, processes for the valorization of lignin are still limited [1]. Due to its hyperbranched polyphenol-like structure, lignin gained increasing interest as biobased building block for polymer synthesis [2]. The present work is focused on extraction and purification of lignin from industrial black liquor and synthesis of lignin-based polyurethanes.
Once aberrantly activated, the Wnt/βcatenin pathway may result in uncontrolled proliferation and eventually cancer. Efforts to counter and inhibit this pathway are mainly directed against βcatenin, as it serves a role on the cytoplasm and the nucleus. In addition, speciallygenerated lymphocytes are recruited for the purpose of treating liver cancer. Peripheral blood mononuclear lymphocytes are expanded by the timely addition of interferon γ, interleukin (IL)1β, IL2 and anticluster of differentiation 3 antibody. The resulting cells are called cytokineinduced killer (CIK) cells. The present study utilised these cells and combine them with drugs inhibiting the Wnt pathway in order to examine whether this resulted in an improvement in the killing ability of CIK cells against liver cancer cells. Drugs including ethacrynic acid (EA) and ciclopirox olamine (CPX) were determined to be suitable candidates, as determined by previous studies. Drugs were administered on their own and combined with CIK cells and then a cell viability assay was performed. These results suggest that EAtreated cells demonstrated apoptosis and were significantly affected compared with untreated cells. Unlike EA, CPX killed normal and cancerous cells even at low concentrations. Subsequent to combining EA with CIK cells, the potency of killing was increased and a greater number of cells died, which proves a synergistic action. In summary, EA may be used as an antihepatocellular carcinoma drug, while CPX possesses a high toxicity to cancerous as well as to normal cells. It was proposed that EA should be integrated into present therapeutic methods for cancer.
Thermo-chemical conversion of cucumber peel waste for biobased energy and chemical production
(2022)
Defect evolution in thermal barrier coating systems under multi-axial thermomechanical loading
(2005)
Advanced thermal gradient mechanical fatigue testing of CMSX-4 with an oxidation protection coating
(2008)
Timely recognition of threats can be significantly supported by security assistance systems that work continuously in time and call the security personnel in case of anomalous events in the surveillance area. We describe the concept and the realization of an indoor security assistance system for real-time decision support. The system consists of a computer vision module and a person classification module. The computer vision module provides a video event analysis of the entrance region in front of the demonstrator. After entering the control corridor, the persons are tracked, classified, and potential threats are localized inside the demonstrator. Data for the person classification are provided by chemical sensors detecting hazardous materials. Due to their limited spatio-temporal resolution, a single chemical sensor cannot localize this material and associate it with a person. We compensate this deficiency by fusing the output of multiple, distributed chemical sensors with kinematical data from laser-range scanners. Considering both the computer vision formation and the results of the person classification affords the localization of threats and a timely reaction of the security personnel.
Bisher ist nicht bekannt, in welchem Ausmaß Fremd- oder Störgerüche dazu geeignet sind, die allgemeine Leistungsfähigkeit eines Sprengstoffspürhundes einzuschränken oder sogar die Detektion eines Sprengkörpers zu verhindern. Ziel ist es zu untersuchen, inwieweit sich durch den gezielten Einsatz von Störsubstanzen die Sprengstoffdetektionsfähigkeit von Spürhunden beeinflussen lässt. Mit Detektionsfähigkeit ist hier sowohl die Wahrscheinlichkeit einer richtigen Detektion von Sprengstoffen in Gegenwart von starken Fremdgerüchen, als auch die ebenfalls zu erwartende Verringerung der Einsatzdauer (vorzeitige Erschöpfung) gemeint.
We present herein a new class of resin formulations for stereolithography, named FlexSL, with a broad bandwidth of tunable mechanical properties. The novel polyether(meth)acrylate based material class has outstanding material characteristics in combination with the advantages of being a biocompatible (meth)acrylate based processing material. FlexSL shows very promising results in several initial biocompatibility tests. This emphasizes its non-toxic behavior in a biomedical environment, caused mainly by the (meth)acrylate based core components. A short overview of mechanical and processing properties will be given in the end. The herein presented novel FlexSL materials show a significant lower cytotoxicity in contrast to commercial applied acrylic stereolithography resins. Further biocompatibility tests according to ISO 10993 protocols are planned. On the one hand, there are technical applications for this material (e.g. flaps, tubes, hoses, cables, sealing parts, connectors and other technical rubber-like applications), and on the other hand, broad fields of potential biomedical applications in which the FlexSL materials can be beneficial are obvious. Especially these could be small series production of medical products with special flexible material requirements. In addition, the usage for individual soft hearing aid shells, intra-operative planning services and tools like intra-op cutting templates and sawing guides is very attractive. The possibility to modify the FlexSL resins also for high-resolution applications makes it possible to manufacture now very flexible micro-prototypes with outstanding material characteristics and very fine structures with a minimum resolution of 20 mym and a layer thickness of minimal 5 myrn. These resin formulations are applicable and adjustable to other stereolithographic equipment available on the market.
Cathepsin K (CatK) is a target for the treatment of osteoporosis, arthritis, and bone metastasis. Peptidomimetics with a cyanohydrazide warhead represent a new class of highly potent CatK inhibitors; however, their binding mechanism is unknown. We investigated two model cyanohydrazide inhibitors with differently positioned warheads: an azadipeptide nitrile Gü1303 and a 3-cyano-3-aza-β-amino acid Gü2602. Crystal structures of their covalent complexes were determined with mature CatK as well as a zymogen-like activation intermediate of CatK. Binding mode analysis, together with quantum chemical calculations, revealed that the extraordinary picomolar potency of Gü2602 is entropically favoured by its conformational flexibility at the nonprimed-primed subsites boundary. Furthermore, we demonstrated by live cell imaging that cyanohydrazides effectively target mature CatK in osteosarcoma cells. Cyanohydrazides also suppressed the maturation of CatK by inhibiting the autoactivation of the CatK zymogen. Our results provide structural insights for the rational design of cyanohydrazide inhibitors of CatK as potential drugs.
Miscanthus bietet als nachwachsende Industrie- und Energiepflanze zahlreiche Vorteile, die neben den direkten landwirtschaftlichen Anwendungen wie Verbrennung und Tiereinstreu auch eine stoffliche Nutzung im chemischen Bereich zulassen. Als C4-Pflanze mit gesteigerter Photosynthese-Aktivität weist Miscanthus zudem eine hohe CO2-Fixierrate auf. Aufgrund des geringen Kultivierungsaufwandes sowie der hohen Erträge bietet sich Miscanthus als ausgesprochen attraktiver Rohstoff für die Produktion erneuerbarer Kraftstoffe und Chemikalien an, welche mittels thermo-chemischer Umwandlung gewonnen werden.
Coumarin as a structural component of substrates and probes for serine and cysteine proteases
(2020)
The present thesis elucidates the development of (i) a series of small molecule inhibitors reacting in a covalent-irreversible manner with the targeted proteases and (ii) a fluorescently labeled activity-based probe as a pharmacological tool compound for investigation of specific functions of the mentioned enzymes in vitro. Herein, the rational design, organic synthesis and quantitative structure-activity-relationships are described extensively.
P30 - Das Elektrospinnen von halbleitenden Zinndioxidfasern für die Detektion von Wasserstoff
(2022)
Das Ziel dieser Arbeit ist die Entwicklung von dünnen keramischen Fasern als halbleitendes Sensormaterial zum Nachweis von Wasserstoff, möglichst bei Zimmertemperatur. Die elektrische Leitfähigkeit halbleitender Metalloxide ändert sich durch die Einwirkung von oxidierenden und reduzierenden Gasen auf die Oberfläche des Metalloxids. Dieser Effekt kann zur Messung der Gaskonzentration genutzt werden. Die Reaktion von Zinn(IV)-oxid mit Wasserstoff basiert auf der Reduktion des Zinn(IV)-oxids zum Zinn, wobei die Elektronen des Zinn(IV)-oxids im metallischen Zinn verbleiben und dort im nicht gebundenen Zustand zu einer Leitfähigkeitserhöhung beitragen. Die Reaktion des Wasserstoffes kann sowohl mit den Sauerstoffatomen des Oxids als auch mit adsorbierten Sauerstoffatomen an der Oxidoberfläche stattfinden.[ 6] Da die Reaktionen an der Oberfläche des Oxids stattfinden, sollten Sensoren mit einer großen Oberfläche im Vergleich zu metalloxidischen Bulkmaterialien eine höhere Empfindlichkeit aufweisen. [3] Die Verwendung von Fasern anstelle von Dünn- oder Dickschichten führt dabei zu einer besseren Sensitivität gegenüber Gasen.
Synthesis of Substituted Hydroxyapatite for Application in Bone Tissue Engineering and Drug Delivery
(2019)
Amaç: Keton cisim oluşumu (ketogenez) bozuklukları; mitokondriyel 3-hidroksi-3metil glutaril CoA sentaz (Mhs) ve 3-hidroksi-3-metil glutaril CoA liyaz (HL) enzim eksiklikleri sonucu oluşur. Keton cisim yıkımı (ketoliz) bozuklukları ise suksinil CoA: 3 oksoasit CoA transferaz (SCOT) ve asetoasetil CoA thiolaz-beta ketotiolaz (MAT) enzim eksiklikleri sonucu oluşmaktadır. Keton metabolizma bozukluğu tanısıyla izlenen hastaların klinik ve laboratuvar bulguları ile değerlendirilmesi amaçlandı.
Yöntem: Keton metabolizması bozukluğu tanısıyla izlenen hasta verileri retrospektif olarak incelendi.
Bulgular: Dört hastada HL eksikliği, 3 hastada MAT eksikliği ve 2 hastada SCOT eksikliği tanısı mevcuttu. Hastaların ortanca yaşı 5 yıl (6 ay-15,5 yıl), ilk metabolik dekompanzasyon atak yaşı ortalama 7,7 ay (22 gün-19 ay) idi. MAT eksikliği olan bir hasta, kardeş taraması ile asemptomatik dönemde tanı aldı. İki hastada spastik tetraparezi gibi ağır nörolojik defisit gelişti. Dekompanzasyon ataklarının beslenememe, kusma ve gastroenterit gibi infeksiyon sonrası geliştiği görüldü.
Sonuç: Açıklanamayan metabolik asidoz atakları durumunda keton metabolizma bozuklukları akılda tutulmalıdır. Akut dekompanzasyon değişik yaşlarda ortaya çıkabilir, klinik şiddeti değişken olabilir. Erken tanı ve uygun tedavi mortalite ve morbidite açısından çok önemlidir.
Process-induced changes in thermo-mechanical viscoelastic properties and the corresponding morphology of biodegradable polybutylene adipate terephthalate (PBAT) and polylactic acid (PLA) blown film blends modified with four multifunctional chain-extending cross-linkers (CECL) were investigated. The introduction of CECL modified the properties of the reference PBAT/PLA blend significantly. The thermal analysis showed that the chemical reactions were incomplete after compounding, and that film blowing extended them. SEM investigations of the fracture surfaces of blown extrusion films reveal the significant effect of CECL on the morphology formed during the processing. The anisotropic morphology introduced during film blowing proved to affect the degradation processes as well. Furthermore, the reactions of CECL with PBAT/PLA induced by the processing depend on the deformation directions. The blow-up ratio parameter was altered to investigate further process-induced changes proving synergy with mechanical and morphological features. Using blown film extrusion, the elongational behavior represents a very important characteristic. However, its evaluation may be quite often problematic, but with the SER Universal Testing Platform it was possible to determine changes in the duration of time intervals corresponding to the rupture of elongated samples.