Refine
H-BRS Bibliography
- yes (2)
Departments, institutes and facilities
- Fachbereich Angewandte Naturwissenschaften (2) (remove)
Document Type
- Article (1)
- Doctoral Thesis (1)
Language
- English (2)
Keywords
- diffusion (2) (remove)
Traditional and newly developed testing methods were used for extensive application-related characterization of transdermal therapeutic systems (TTS) and pressure sensitive adhesives (PSA). Large amplitude oscillatory shear tests of PSAs were correlated to the material behavior during the patient’s motion and showed that all PSAs were located close to the gel point. Furthermore, an increasing strain amplitude results in stretching and yielding of the PSA´s microstructure causing a consolidation of the network and a release with increasing strain amplitude. RheoTack approach was developed to allow for an advanced tack characterization of TTS with visual inspection. The results showed a clear resin content and rod geometry dependent behavior, and displays the PSA´s viscoelasticity resulting in either high tack and long stretched fibrils or non-adhesion and brittle behavior. Moreover, diffusion of water / sweat during TTS´s application might influence its performance. Therefore, a dielectric analysis based evaluation method displayed occurring water diffusion into the PSA from which the diffusion coefficient can be determined, and showed clear material and resin content dependent behavior. All methods allow for an advanced product-oriented material testing that can be utilized within further TTS development.
The solvent exchange as one of the most important steps during the manufacturing process of organic aerogels was investigated. This step is crucial as a preparatory step for the supercritical drying, since the pore solvent must be soluble in supercritical carbon dioxide to enable solvent extraction. The development and subsequent optimization of a suitable system with a peristaltic pump for automatic solvent exchange proved to be a suitable approach. In addition, the influence of zeolites on the acceleration of the process was found to be beneficial. To investigate the process, the water content in acetone was determined at different times using Karl Fischer titration. The shrinkage, densities, as well as the surface areas of the aerogels were analyzed. Based on these, the influence of various process parameters on the final structure of the obtained aerogels was investigated and evaluated. Modeling on diffusion in porous materials completes this study.