Refine
H-BRS Bibliography
- yes (5)
Departments, institutes and facilities
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (5) (remove)
Document Type
- Doctoral Thesis (5) (remove)
Language
- English (5) (remove)
Has Fulltext
- no (5)
Keywords
- Additiv (1)
- Antioxidans (1)
- Charakterisierung (1)
- Christmas trees (1)
- Clustering (1)
- Co-creative processes (1)
- Computational creativity (1)
- Dimensionality reduction (1)
- Divergent optimization (1)
- Evolutionary optimization (1)
Traditional and newly developed testing methods were used for extensive application-related characterization of transdermal therapeutic systems (TTS) and pressure sensitive adhesives (PSA). Large amplitude oscillatory shear tests of PSAs were correlated to the material behavior during the patient’s motion and showed that all PSAs were located close to the gel point. Furthermore, an increasing strain amplitude results in stretching and yielding of the PSA´s microstructure causing a consolidation of the network and a release with increasing strain amplitude. RheoTack approach was developed to allow for an advanced tack characterization of TTS with visual inspection. The results showed a clear resin content and rod geometry dependent behavior, and displays the PSA´s viscoelasticity resulting in either high tack and long stretched fibrils or non-adhesion and brittle behavior. Moreover, diffusion of water / sweat during TTS´s application might influence its performance. Therefore, a dielectric analysis based evaluation method displayed occurring water diffusion into the PSA from which the diffusion coefficient can be determined, and showed clear material and resin content dependent behavior. All methods allow for an advanced product-oriented material testing that can be utilized within further TTS development.
In this doctoral thesis the curing process of visible light-curing (VLC) dental composites and 3D printing rapid prototyping (RP) materials are investigated with the focus on dielectric analysis (DEA). This method is able to monitor the curing of resins in an alternating electric fringe field with adjustable frequencies and is often used for cure control of composites manufacturing in the aviation and automotive industry but hardly established in dental science or RP method development. It is capable of investigating very fast initiation and primary curing processes using high frequencies in the kHz-range. The aim of the Thesis is a better understanding of the curing processes with respect to curing parameters such as resin composition, viscosity, temperature, and for light-curing composites also light intensity and irradiation depth. Due to the nature of both dental and RP systems an application of specific experimental set-up had to be designed allowing for the generation of reproducible and valid results. Subsequently, different evaluation methods were developed to characterize the curing behavior of both material types. A special focus was paid to the determination of kinetic parameters from DEA measurements. Reaction rates of the curing of the corresponding thermosets were calculated and applied to the ion viscosity curves measured by DEA to evaluate reaction kinetic parameters. For the dental composites it could be clearly shown that the initial curing rate is directly proportional to light intensity and not to its square root as proposed by many others authors. A good description of the curing behaviour of 3DP RP materials was also achieved assuming a reaction order smaller than one. This data provides the base for the kinetic modeling of polymerization and curing processes proposed within the Thesis.
Process-dependent thermo-mechanical viscoelastic properties and the corresponding morphology of HDPE extrusion blow molded (EBM) parts were investigated. Evaluation of bulk data showed that flow direction, draw ratio, and mold temperature influence the viscoelastic behavior significantly in certain temperature ranges. Flow induced orientations due to higher draw ratio and higher mold temperature lead to higher crystallinities. To determine the local viscoelastic properties, a new microindentation system was developed by merging indentation with dynamic mechanical analysis. The local process-structure-property relationship of EBM parts showed that the cross-sectional temperature distribution is clearly reflected by local crystallinities and local complex moduli. Additionally, a model to calculate three-dimensional anisotropic coefficients of thermal expansion as a function of the process dependent crystallinity was developed based on an elementary volume unit cell with stacked layers of amorphous phase and crystalline lamellae. Good agreement of the predicted thermal expansion coefficients with measured ones was found up to a temperature of 70 °C.
Typically, plastic packaging materials are produced using additives, like e.g. stabilisers, to introduce specific desired properties into the material or, in case of stabilisers, to prolong the shelf life of such packaging materials. However, those stabilisers are typically fossil-based and can pose risks to both environmental and human health. Therefore, the present study presents more sustainable alternatives based on regional renewable resources which show the relevant antioxidant, antimicrobial and UV absorbing properties to successfully serve as a plastic stabiliser. In the study, all plants are extracted and characterised with regard to not only antioxidant, antimicrobial and UV absorbing effects, but also with regard to additional relevant information like chemical constituents, molar mass distribution, absorbance in the visible range et cetera. The extraction process is furthermore optimised and, where applicable, reasonable opportunities for waste valorisation are explored and analysed. Furthermore, interactions between analysed plant extracts are described and model films based on Poly-Lactic Acid are prepared, incorporating analysed plant extracts. Based on those model films, formulation tests and migration analysis according to EU legislation is conducted.
The well-known aromatic and medicinal plant thyme (Thymus vulgaris L.) includes phenolic terpenoids like thymol and carvacrol which have strong antioxidant, antimicrobial and UV absorbing effects. Analyses show that those effects can be used in both lipophilic and hydrophilic surroundings, that the variant Varico 3 is a more potent cultivar than other analysed thyme variants, and that a passive extraction setup can be used for extract preparation while distillation of the Essential Oils can be a more efficient approach.
Macromolecular antioxidant polyphenols, particularly proanthocyanidins, have been found in the seed coats of the European horse chestnut (Aesculus hippocastanum L.) which are regularly discarded in phytopharmaceutical industry. In this study, such effects and compounds have been reported for the first time while a valorisation of waste materials has been analysed successfully. Furthermore, a passive extraction setup for waste materials and whole seeds has been developed. In extracts of snowdrops, precisely Galanthus elwesii HOOK.F., high concentrations of tocopherol have been found which promote a particularly high antioxidant capacity in lipophilic surroundings. Different coniferous woods (Abies div., Picea div.) which are in use as Christmas trees are extracted after separating the biomass in leafs and wood parts before being analysed regarding extraction optimisation and drought resistance of active substances. Antioxidant and UV absorbing proanthocyanidins are found even in dried biomasses, allowing the circular use of already used Christmas trees as bio-based stabilisers and the production of sustainable paper as a byproduct.
In this thesis it is posed that the central object of preference discovery is a co-creative process in which the Other can be represented by a machine. It explores efficient methods to enhance introverted intuition using extraverted intuition's communication lines. Possible implementations of such processes are presented using novel algorithms that perform divergent search to feed the users' intuition with many examples of high quality solutions, allowing them to take influence interactively. The machine feeds and reflects upon human intuition, combining both what is possible and preferred. The machine model and the divergent optimization algorithms are the motor behind this co-creative process, in which machine and users co-create and interactively choose branches of an ad hoc hierarchical decomposition of the solution space.
The proposed co-creative process consists of several elements: a formal model for interactive co-creative processes, evolutionary divergent search, diversity and similarity, data-driven methods to discover diversity, limitations of artificial creative agents, matters of efficiency in behavioral and morphological modeling, visualization, a connection to prototype theory, and methods to allow users to influence artificial creative agents. This thesis helps putting the human back into the design loop in generative AI and optimization.