Refine
H-BRS Bibliography
- yes (33) (remove)
Departments, institutes and facilities
- Fachbereich Angewandte Naturwissenschaften (33) (remove)
Document Type
- Article (33)
Year of publication
- 2022 (33) (remove)
Language
- English (33)
Has Fulltext
- yes (33) (remove)
Keywords
- SERS (2)
- creep (2)
- cytokine-induced killer cells (2)
- immunotherapy (2)
- AOP (1)
- APC superfamily (1)
- ATB0,+ (1)
- AuNPs (1)
- Biopolymers (1)
- CD40, CTLA-4 (1)
Cytokine-induced killer cells (CIK) in combination with dendritic cells (DCs) have shown favorable outcomes in renal cell carcinoma (RCC), yet some patients exhibit recurrence or no response to this therapy. In a broader perspective, enhancing the antitumor response of DC-CIK cells may help to address this issue. Considering this, herein, we investigated the effect of anti-CD40 and anti-CTLA-4 antibodies on the antitumor response of DC-CIK cells against RCC cell lines. Our analysis showed that, a) anti-CD40 antibody (G28.5) increased the CD3+CD56+ effector cells of CIK cells by promoting the maturation and activation of DCs, b) G28.5 also increased CTLA-4 expression in CIK cells via DCs, but the increase could be hindered by the CTLA-4 inhibitor (ipilimumab), c) adding ipilimumab was also able to significantly increase the proportion of CD3+CD56+ cells in DC-CIK cells, d) anti-CD40 antibodies predominated over anti-CTLA-4 antibodies for cytotoxicity, apoptotic effect and IFN-g secretion of DC-CIK cells against RCC cells, e) after ipilimumab treatment, the population of Tregs in CIK cells remained unaffected, but ipilimumab combined with G28.5 significantly reduced the expression of CD28 in CIK cells. Taken together, we suggest that the agonistic anti-CD40 antibody rather than CTLA-4 inhibitor may improve the antitumor response of DC-CIK cells, particularly in RCC. In addition, we pointed towards the yet to be known contribution of CD28 in the crosstalk between anti-CTLA-4 and CIK cells.
When the Artemis missions launch, NASA's Orion spacecraft (and crew as of the Artemis II mission) will be exposed to the deep space radiation environment beyond the protection of Earth's magnetosphere. Hence, it is essential to characterize the effects of space radiation, microgravity, and the combination thereof on cells and organisms, i.e., to quantify any correlations between the deep space radiation environment, genetic variation, and induced genetic changes in cells. To address this, the Artemis I mission will include the Peristaltic Laboratory for Automated Science with Multigenerations (PLASM) hardware containing the Deep Space Radiation Genomics (DSRG) experiment. The scientific aims of DSRG are (i) to identify the metabolic and genomic pathways in yeast affected by microgravity, space radiation, and their combination, and (ii) to differentiate between gravity and radiation exposure on single-gene deletion/overexpressing strains' ability to thrive in the spaceflight environment. Yeast is used as a model system because 70% of its essential genes have a human homolog, and over half of these homologs can functionally replace their human counterpart. As part of the experiment preparation towards spaceflight, an Experiment Verification Test (EVT) was performed at the Kennedy Space Center to verify that the experiment design, hardware, and approach to automated operations will enable achieving the scientific aims. For the EVT, fluidic systems were assembled, sterilized, loaded, and acceptance-tested, and subsequently integrated with the engineering parts to produce a flight-like PLASM unit. Each fluidic system consisted of (i) a Media Bag, (ii) four Culture Bags loaded with Saccharomyces cerevisiae (two with deletion series and the remaining two with overexpression series), and (iii) tubing and check valves. The EVT PLASM unit was put under a temperature profile replicating the anticipated different phases of flight, including handover to launch, spaceflight, and splashdown to handover back to the science team, for a 58-day period. At EVT completion, the rate of activation, cellular growth, RNA integrity, and sample contamination were interrogated. All of the experiment's success criteria were satisfied, encouraging our efforts to perform this investigation on Artemis I. This manuscript thus describes the process of spaceflight experiment design maturation with a focus on the EVT, its results, DSRG's preparation for its planned launch on Artemis I in 2022, and how the PLASM hardware can enable other scientific goals on future Artemis missions and/or the Lunar Orbital Platform – Gateway.
Approximately 45% of global greenhouse gas emissions are caused by the construction and use of buildings. Thermal insulation of buildings in the current context of climate change is a well-known strategy to improve the energy efficiency of buildings. The development of renewable insulation material can overcome the drawbacks of widely used insulation systems based on polystyrene or mineral wool. This study analyzes the sustainability and thermal conductivity of new insulation materials made of Miscanthus x giganteus fibers, foaming agents, and alkali-activated fly ash binder. Life cycle assessments (LCA) are necessary to perform benchmarking of environmental impacts of new formulations of geopolymer-based insulation materials. The global warming potential (GWP) of the product is primarily determined by the main binder component sodium silicate. Sodium silicate's CO2 emissions depend on local production, transportation, and energy consumption. The results, which have been published during recent years, vary in a wide range from 0.3 kg to 3.3 kg CO2-eq. kg-1. The overall GWP of the insulation system based on Miscanthus fibers, with properties according to current thermal insulation regulations, reaches up to 95% savings of CO2 emissions compared to conventional systems. Carbon neutrality can be achieved through formulations containing raw materials with carbon dioxide emissions and renewable materials with negative GWP, thus balancing CO2 emissions.
Therapeutic Treatments for Osteoporosis-Which Combination of Pills Is the Best among the Bad?
(2022)
Osteoporosis is a chronical, systemic skeletal disorder characterized by an increase in bone resorption, which leads to reduced bone density. The reduction in bone mineral density and therefore low bone mass results in an increased risk of fractures. Osteoporosis is caused by an imbalance in the normally strictly regulated bone homeostasis. This imbalance is caused by overactive bone-resorbing osteoclasts, while bone-synthesizing osteoblasts do not compensate for this. In this review, the mechanism is presented, underlined by in vitro and animal models to investigate this imbalance as well as the current status of clinical trials. Furthermore, new therapeutic strategies for osteoporosis are presented, such as anabolic treatments and catabolic treatments and treatments using biomaterials and biomolecules. Another focus is on new combination therapies with multiple drugs which are currently considered more beneficial for the treatment of osteoporosis than monotherapies. Taken together, this review starts with an overview and ends with the newest approaches for osteoporosis therapies and a future perspective not presented so far.
With the increasing demand for ultrapure water in the pharmaceutical and semiconductor industry, the need for precise measuring instruments for those applications is also growing. One critical parameter of water quality is the amount of total organic carbon (TOC). This work presents a system that uses the advantage of the increased oxidation power achieved with UV/O3 advanced oxidation process (AOP) for TOC measurement in combination with a significant miniaturization compared to the state of the art. The miniaturization is achieved by using polymer-electrolyte membrane (PEM) electrolysis cells for ozone generation in combination with UV-LEDs for irradiation of the measuring solution, as both components are significantly smaller than standard equipment. Conductivity measurement after oxidation is the measuring principle and measurements were carried out in the TOC range between 10 and 1000 ppb TOC. The suitability of the system for TOC measurement is demonstrated using the oxidation by ozonation combined with UV irradiation of defined concentrations of isopropyl alcohol (IPA).
A main factor hampering life in space is represented by high atomic number nuclei and energy (HZE) ions that constitute about 1% of the galactic cosmic rays. In the frame of the “STARLIFE” project, we accessed the Heavy Ion Medical Accelerator (HIMAC) facility of the National Institute of Radiological Sciences (NIRS) in Chiba, Japan. By means of this facility, the extremophilic species Haloterrigena hispanica and Parageobacillus thermantarcticus were irradiated with high LET ions (i.e., Fe, Ar, and He ions) at doses corresponding to long permanence in the space environment. The survivability of HZE-treated cells depended upon either the storage time and the hydration state during irradiation; indeed, dry samples were shown to be more resistant than hydrated ones. With particular regard to spores of the species P. thermantarcticus, they were the most resistant to irradiation in a water medium: an analysis of the changes in their biochemical fingerprinting during irradiation showed that, below the survivability threshold, the spores undergo to a germination-like process, while for higher doses, inactivation takes place as a consequence of the concomitant release of the core’s content and a loss of integrity of the main cellular components. Overall, the results reported here suggest that the selected extremophilic microorganisms could serve as biological model for space simulation and/or real space condition exposure, since they showed good resistance to ionizing radiation exposure and were able to resume cellular growth after long-term storage.
Modeling of Creep Behavior of Particulate Composites with Focus on Interfacial Adhesion Effect
(2022)
Evaluation of creep compliance of particulate composites using empirical models always provides parameters depending on initial stress and material composition. The effort spent to connect model parameters with physical properties has not resulted in success yet. Further, during the creep, delamination between matrix and filler may occur depending on time and initial stress, reducing an interface adhesion and load transfer to filler particles. In this paper, the creep compliance curves of glass beads reinforced poly(butylene terephthalate) composites were fitted with Burgers and Findley models providing different sets of time-dependent model parameters for each initial stress. Despite the finding that the Findley model performs well in a primary creep, the Burgers model is more suitable if secondary creep comes into play; they allow only for a qualitative prediction of creep behavior because the interface adhesion and its time dependency is an implicit, hidden parameter. As Young’s modulus is a parameter of these models (and the majority of other creep models), it was selected to be introduced as a filler content-dependent parameter with the help of the cube in cube elementary volume approach of Paul. The analysis led to the time-dependent creep compliance that depends only on the time-dependent creep of the matrix and the normalized particle distance (or the filler volume content), and it allowed accounting for the adhesion effect. Comparison with the experimental data confirmed that the elementary volume-based creep compliance function can be used to predict the realistic creep behavior of particulate composites.
A precise characterization of substances is essential for the safe handling of explosives. One parameter regularly characterized is the impact sensitivity. This is typically determined using a drop hammer. However, the results can vary depending on the test method and even the operator, and it is not possible to distinguish the type of decomposition such as detonation and deflagration. This study monitors the reaction progress by constructing a drop hammer to measure the decomposition reaction of four different primary explosives (tetrazene, silver azide, lead azide, lead styphnate) in order to determine the reproducibility of this method. Additionally, further possible evaluation methods are explored to improve on the current binary statistical analysis. To determine whether classification was possible based on extracted features, the responses of equipped sensor arrays, which measure and monitor the reactions, were studied and evaluated. Features were extracted from this data and were evaluated using multivariate methods such as principal component analysis (PCA) and linear discriminant analysis (LDA). The results indicate that although the measurements show substance specific trends, they also show a large scatter for each substance. By reducing the dimensions of the extracted features, different sample clusters can be represented and the calculated loadings allow significant parameters to be determined for classification. The results also suggest that differentiation of different reaction mechanisms is feasible. Testing of the regressor function shows reliable results considering the comparatively small amount of data.
Bonding wires made of aluminum are the most used materials for the transmission of electrical signals in power electronic devices. During operation, different cyclic mechanical and thermal stresses can lead to fatigue loads and a failure of the bonding wires. A prediction or prevention of the wire failure is not yet possible by design for all cases. The following work presents meaningful fatigue tests in small wire dimensions and investigates the influence of the R-ratio on the lifetime of two different aluminum wires with a diameter of 300 μm each. The experiments show very reproducible fatigue results with ductile failure behavior. The endurable stress amplitude decreases linearly with an increasing stress ratio, which can be displayed by a Smith diagram, even though the applied maximum stresses exceed the initial yield stresses determined by tensile tests. A scaling of the fatigue results by the tensile strength indicates that the fatigue level is significantly influenced by the strength of the material. Due to the very consistent findings, the development of a generalized fatigue model for predicting the lifetime of bonding wires with an arbitrary loading situation seems to be possible and will be further investigated.
The utilization of simulation procedures is gaining increasing attention in the product development of extrusion blow molded parts. However, some simulation steps, like the simulation of shrinkage and warpage, are still associated with uncertainties. The reason for this is on the one hand a lack of standardized interfaces for the transfer of simulation data between different simulation tools, and on the other hand the complex time-, temperature- and process-dependent material behavior of the used semi crystalline polymers. Using a new vendor neutral interface standard for the data transfer, the shrinkage analysis of a simple blow molded part is investigated and compared to experimental data. A linear viscoelastic material model in combination with an orthotropic process- and temperature-dependent thermal expansion coefficient is used for the shrinkage prediction. A good agreement is observed. Finally, critical parameters in the simulation models that strongly influence the shrinkage analysis are identified by a sensitivity study.