Fachbereich Ingenieurwissenschaften und Kommunikation
Refine
H-BRS Bibliography
- yes (102)
Departments, institutes and facilities
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (102) (remove)
Document Type
- Article (102) (remove)
Year of publication
Keywords
- West Africa (4)
- Hydrogen storage (3)
- Lattice Boltzmann Method (3)
- Optimization (3)
- error analysis (3)
- polyethylene (3)
- Extrusion blow molding (2)
- Force field (2)
- Global horizontal irradiance (2)
- Molecular dynamics (2)
Error analysis in a high accuracy sampled-data velocity stabilising system using Volterra series
(2015)
Stably stratified Taylor–Green vortex simulations are performed by lattice Boltzmann methods (LBM) and compared to other recent works using Navier–Stokes solvers. The density variation is modeled with a separate distribution function in addition to the particle distribution function modeling the flow physics. Different stencils, forcing schemes, and collision models are tested and assessed. The overall agreement of the lattice Boltzmann solutions with reference solutions from other works is very good, even when no explicit subgrid model is used, but the quality depends on the LBM setup. Although the LBM forcing scheme is not decisive for the quality of the solution, the choice of the collision model and of the stencil are crucial for adequate solutions in underresolved conditions. The LBM simulations confirm the suppression of vertical flow motion for decreasing initial Froude numbers. To gain further insight into buoyancy effects, energy decay, dissipation rates, and flux coefficients are evaluated using the LBM model for various Froude numbers.
Turbulent compressible flows are traditionally simulated using explicit time integrators applied to discretized versions of the Navier-Stokes equations. However, the associated Courant-Friedrichs-Lewy condition severely restricts the maximum time-step size. Exploiting the Lagrangian nature of the Boltzmann equation’s material derivative, we now introduce a feasible three-dimensional semi-Lagrangian lattice Boltzmann method (SLLBM), which circumvents this restriction. While many lattice Boltzmann methods for compressible flows were restricted to two dimensions due to the enormous number of discrete velocities in three dimensions, the SLLBM uses only 45 discrete velocities. Based on compressible Taylor-Green vortex simulations we show that the new method accurately captures shocks or shocklets as well as turbulence in 3D without utilizing additional filtering or stabilizing techniques other than the filtering introduced by the interpolation, even when the time-step sizes are up to two orders of magnitude larger compared to simulations in the literature. Our new method therefore enables researchers to study compressible turbulent flows by a fully explicit scheme, whose range of admissible time-step sizes is dictated by physics rather than spatial discretization.
This work thoroughly investigates a semi-Lagrangian lattice Boltzmann (SLLBM) solver for compressible flows. In contrast to other LBM for compressible flows, the vertices are organized in cells, and interpolation polynomials up to fourth order are used to attain the off-vertex distribution function values. Differing from the recently introduced Particles on Demand (PoD) method , the method operates in a static, non-moving reference frame. Yet the SLLBM in the present formulation grants supersonic flows and exhibits a high degree of Galilean invariance. The SLLBM solver allows for an independent time step size due to the integration along characteristics and for the use of unusual velocity sets, like the D2Q25, which is constructed by the roots of the fifth-order Hermite polynomial. The properties of the present model are shown in diverse example simulations of a two-dimensional Taylor-Green vortex, a Sod shock tube, a two-dimensional Riemann problem and a shock-vortex interaction. It is shown that the cell-based interpolation and the use of Gauss-Lobatto-Chebyshev support points allow for spatially high-order solutions and minimize the mass loss caused by the interpolation. Transformed grids in the shock-vortex interaction show the general applicability to non-uniform grids.
Off-lattice Boltzmann methods increase the flexibility and applicability of lattice Boltzmann methods by decoupling the discretizations of time, space, and particle velocities. However, the velocity sets that are mostly used in off-lattice Boltzmann simulations were originally tailored to on-lattice Boltzmann methods. In this contribution, we show how the accuracy and efficiency of weakly and fully compressible semi-Lagrangian off-lattice Boltzmann simulations is increased by velocity sets derived from cubature rules, i.e. multivariate quadratures, which have not been produced by the Gauß-product rule. In particular, simulations of 2D shock-vortex interactions indicate that the cubature-derived degree-nine D2Q19 velocity set is capable to replace the Gauß-product rule-derived D2Q25. Likewise, the degree-five velocity sets D3Q13 and D3Q21, as well as a degree-seven D3V27 velocity set were successfully tested for 3D Taylor–Green vortex flows to challenge and surpass the quality of the customary D3Q27 velocity set. In compressible 3D Taylor–Green vortex flows with Mach numbers on-lattice simulations with velocity sets D3Q103 and D3V107 showed only limited stability, while the off-lattice degree-nine D3Q45 velocity set accurately reproduced the kinetic energy provided by literature.
Rosenbrock–Wanner methods for systems of stiff ordinary differential equations are well known since the seventies. They have been continuously developed and are efficient for differential-algebraic equations of index-1, as well. Their disadvantage that the Jacobian matrix has to be updated in every time step becomes more and more obsolete when automatic differentiation is used. Especially the family of Rodas methods has proven to be a standard in the Julia package DifferentialEquations. However, the fifth-order Rodas5 method undergoes order reduction for certain problem classes. Therefore, the goal of this paper is to compute a new set of coefficients for Rodas5 such that this order reduction is reduced. The procedure is similar to the derivation of the methods Rodas4P and Rodas4P2. In addition, it is possible to provide new dense output formulas for Rodas5 and the new method Rodas5P. Numerical tests show that for higher accuracy requirements Rodas5P always belongs to the best methods within the Rodas family.
This paper presents a novel approach to address noise, vibration, and harshness (NVH) issues in electrically assisted bicycles (e-bikes) caused by the drive unit. By investigating and optimising the structural dynamics during early product development, NVH can decisively be improved and valuable resources can be saved, emphasising its significance for enhancing riding performance. The paper offers a comprehensive analysis of the e-bike drive unit’s mechanical interactions among relevant components, culminating—to the best of our knowledge—in the development of the first high-fidelity model of an entire e-bike drive unit. The proposed model uses the principles of elastic multi body dynamics (eMBD) to elucidate the structural dynamics in dynamic-transient calculations. Comparing power spectra between measured and simulated motion variables validates the chosen model assumptions. The measurements of physical samples utilise accelerometers, contactless laser Doppler vibrometry (LDV) and various test arrangements, which are replicated in simulations and provide accessibility to measure vibrations onto rotating shafts and stationary structures. In summary, this integrated system-level approach can serve as a viable starting point for comprehending and managing the NVH behaviour of e-bikes.
Design of a Medium Voltage Generator with DC-Cascade for High Power Wind Energy Conversion Systems
(2021)
This paper shows a new concept to generate medium voltage (MV) in wind power application to avoid an additional transformer. Therefore, the generator must be redesigned with additional constraints and a new topology for the power rectifier system by using multiple low voltage (LV) power rectifiers connected in series and parallel to increase the DC output voltage. The combination of parallel and series connection of rectifiers is further introduced as DC-cascade. With the resulting DC-cascade, medium output voltage is achieved with low voltage rectifiers and without a bulky transformer. This approach to form a DC-cascade reduces the effort required to achieve medium DC voltage with a simple rectifier system. In this context, a suitable DC-cascade control was presented and verified with a laboratory test setup. A gearless synchronous generator, which is highly segmented so that each segment can be connected to its own power rectifier, is investigated. Due to the mixed AC and DC voltage given by the DC-cascade structure, it becomes more demanding to the design of the generator insulation, which influences the copper fill factor and the design of the cooling system. A design strategy for the overall generator design is carried out considering the new boundary conditions.
Trends of environmental awareness, combined with a focus on personal fitness and health, motivate many people to switch from cars and public transport to micromobility solutions, namely bicycles, electric bicycles, cargo bikes, or scooters. To accommodate urban planning for these changes, cities and communities need to know how many micromobility vehicles are on the road. In a previous work, we proposed a concept for a compact, mobile, and energy-efficient system to classify and count micromobility vehicles utilizing uncooled long-wave infrared (LWIR) image sensors and a neuromorphic co-processor. In this work, we elaborate on this concept by focusing on the feature extraction process with the goal to increase the classification accuracy. We demonstrate that even with a reduced feature list compared with our early concept, we manage to increase the detection precision to more than 90%. This is achieved by reducing the images of 160 × 120 pixels to only 12 × 18 pixels and combining them with contour moments to a feature vector of only 247 bytes.
Suitability of Current Sensors for the Measurement of Switching Currents in Power Semiconductors
(2021)
This paper investigates the impact of current sensors on the measurement of transient currents in fast-switching power semiconductors in a double pulse test (DPT environment. We review previous research that assesses the influence of current sensors on a DPT circuit through mathematical modeling. The developed selection aids can be used to identify suitable current sensors for transient current measurements of fast-switching power semiconductors and to estimate the error introduced by their insertion into the DPT circuit. Afterwards, this analysis is extended by including further elements from real DPT applications to increase the consistency of the error estimation with practical situations and setups. Both methods are compared and their individual advantages and drawbacks are discussed. Finally, a recommendation on when to use which method is derived.
This paper investigates the effect of voltage sensors on the measurement of transient voltages for power semiconductors in a Double Pulse Test (DPT) environment.We adapt previously published models that were developed for current sensors and apply them to voltage sensors to evaluate their suitability for DPT applications. Similarities and differences between transient current and voltage sensors are investigated and the resulting methodology is applied to commercially available and experimental voltage sensors. Finally, a selection aid for given measurement tasks is derived that focuses on the measurement of fast-switching power semiconductors.
Integrating physical simulation data into data ecosystems challenges the compatibility and interoperability of data management tools. Semantic web technologies and relational databases mostly use other data types, such as measurement or manufacturing design data. Standardizing simulation data storage and harmonizing the data structures with other domains is still a challenge, as current standards such as the ISO standard STEP (ISO 10303 ”Standard for the Exchange of Product model data”) fail to bridge the gap between design and simulation data. This challenge requires new methods, such as ontologies, to rethink simulation results integration. This research describes a new software architecture and application methodology based on the industrial standard ”Virtual Material Modelling in Manufacturing” (VMAP). The architecture integrates large quantities of structured simulation data and their analyses into a semantic data structure. It is capable of providing data permeability from the global digital twin level to the detailed numerical values of data entries and even new key indicators in a three-step approach: It represents a file as an instance in a knowledge graph, queries the file’s metadata, and finds a semantically represented process that enables new metadata to be created and instantiated.
This study addresses the common occurrence of cell-to-cell variations arising from manufacturing tolerances and their implications during battery production. The focus is on assessing the impact of these inherent differences in cells and exploring diverse cell and module connection methods on battery pack performance and their subsequent influence on the driving range of electric vehicles (EVs). The analysis spans three battery pack sizes, encompassing various constant discharge rates and nine distinct drive cycles representative of driving behaviours across different regions of India. Two interconnection topologies, categorised as “string” and “cross”, are examined. The findings reveal that cross-connected packs exhibit reduced energy output compared to string-connected configurations, which is reflected in the driving range outcomes observed during drive cycle simulations. Additionally, the study investigates the effects of standard deviation in cell parameters, concluding that an increased standard deviation (SD) leads to decreased energy output from the packs. Notably, string-connected packs demonstrate superior performance in terms of extractable energy under such conditions.
Medien spielen eine Schlüsselrolle für die öffentliche Meinung und Akzeptanz neuer Technologien. Mit einer qualitativen Inhaltsanalyse journalistischer Artikel zum Elektrofahrrad wurden Akteure und ihre Einstellungen und Handlungen in Bezug auf das Elektrofahrrad untersucht. In die Analyse flossen 444 Artikel ausgewählter deutscher Qualitätsmedien aus dem Jahr 2018 ein. Die Untersuchung zeigt den gesellschaftlich relevanten Diskurs über Elektrofahrräder auf und bietet Anknüpfungspunkte für die Förderung von Individualmobilität und der Entwicklung zukunftsfähiger Mobilitätskonzepte.
Accurate global horizontal irradiance (GHI) forecasting is critical for integrating solar energy into the power grid and operating solar power plants. The Weather Research and Forecasting model with its solar radiation extension (WRF-Solar) has been used to forecast solar irradiance in different regions around the world. However, the application of the WRF-Solar model to the prediction of GHI in West Africa, particularly Ghana, has not yet been investigated. The aim of this study is to evaluate the performance of the WRF-Solar model for predicting GHI in Ghana, focusing on three automatic weather stations (Akwatia, Kumasi and Kologo) for the year 2021. We used two one-way nested domains (D1 = 15 km and D2 = 3 km) to investigate the ability of the fully coupled WRF-Solar model to forecast GHI up to 72-hour ahead under different atmospheric conditions. The initial and lateral boundary conditions were taken from the ECMWF high-resolution operational forecasts. Our findings reveal that the WRF-Solar model performs better under clear skies than cloudy skies. Under clear skies, Kologo performed best in predicting 72-hour GHI, with a first day nRMSE of 9.62 %. However, forecasting GHI under cloudy skies at all three sites had significant uncertainties. Additionally, WRF-Solar model is able to reproduce the observed GHI diurnal cycle under high AOD conditions in most of the selected days. This study enhances the understanding of the WRF-Solar model’s capabilities and limitations for GHI forecasting in West Africa, particularly in Ghana. The findings provide valuable information for stakeholders involved in solar energy generation and grid integration towards optimized management in the region.
Estimates of global horizontal irradiance (GHI) from reanalysis and satellite-based data are the most important information for the design and monitoring of PV systems in Africa, but their quality is unknown due to the lack of in situ measurements. In this study, we evaluate the performance of hourly GHI from state-of-the-art reanalysis and satellite-based products (ERA5, CAMS, MERRA-2, and SARAH-2) with 37 quality-controlled in situ measurements from novel meteorological networks established in Burkina Faso and Ghana under different weather conditions for the year 2020. The effects of clouds and aerosols are also considered in the analysis by using common performance measures for the main quality attributes and a new overall performance value for the joint assessment. The results show that satellite data performs better than reanalysis data under different atmospheric conditions. Nevertheless, both data sources exhibit significant bias of more than 150 W/m2 in terms of RMSE under cloudy skies compared to clear skies. The new measure of overall performance clearly shows that the hourly GHI derived from CAMS and SARAH-2 could serve as viable alternative data for assessing solar energy in the different climatic zones of West Africa.
Animal models are often needed in cancer research but some research questions may be answered with other models, e.g., 3D replicas of patient-specific data, as these mirror the anatomy in more detail. We, therefore, developed a simple eight-step process to fabricate a 3D replica from computer tomography (CT) data using solely open access software and described the method in detail. For evaluation, we performed experiments regarding endoscopic tumor treatment with magnetic nanoparticles by magnetic hyperthermia and local drug release. For this, the magnetic nanoparticles need to be accumulated at the tumor site via a magnetic field trap. Using the developed eight-step process, we printed a replica of a locally advanced pancreatic cancer and used it to find the best position for the magnetic field trap. In addition, we described a method to hold these magnetic field traps stably in place. The results are highly important for the development of endoscopic tumor treatment with magnetic nanoparticles as the handling and the stable positioning of the magnetic field trap at the stomach wall in close proximity to the pancreatic tumor could be defined and practiced. Finally, the detailed description of the workflow and use of open access software allows for a wide range of possible uses.
Introduction: Chronic pain is a frequent severe disease and often associated with anxiety, depression, insomnia, disability, and reduced quality of life. This maladaptive condition is further characterized by sensory loss, hyperalgesia, and allodynia. Blue light has been hypothesized to modulate sensory neurons and thereby influence nociception.
Objectives: Here, we compared the effects of blue light vs red light and thermal control on pain sensation in a human experimental pain model.
Methods: Pain, hyperalgesia, and allodynia were induced in 30 healthy volunteers through high-density transcutaneous electrical stimulation. Subsequently, blue light, red light, or thermal control treatment was applied in a cross-over design. The nonvisual effects of the respective light treatments were examined using a well-established quantitative sensory testing protocol. Somatosensory parameters as well as pain intensity and quality were scored.
Results: Blue light substantially reduced spontaneous pain as assessed by numeric rating scale pain scoring. Similarly, pain quality was significantly altered as assessed by the German counterpart of the McGill Pain Questionnaire. Furthermore, blue light showed antihyperalgesic, antiallodynic, and antihypesthesic effects in contrast to red light or thermal control treatment.
Conclusion: Blue-light phototherapy ameliorates pain intensity and quality in a human experimental pain model and reveals antihyperalgesic, antiallodynic, and antihypesthesic effects. Therefore, blue-light phototherapy may be a novel approach to treat pain in multiple conditions.
The cube in cube approach was used by Paul and Ishai-Cohen to model and derive formulas for filler content dependent Young's moduli of particle filled composites assuming perfect filler matrix adhesion. Their formulas were chosen because of their simplicity, and recalculated using an elementary volume approach which transforms spherical inclusions to cubic inclusions. The EV approach led to expression of the composites moduli that allows introducing an adhesion factor kadh ranging from 0 and 1 to take into account reduced filler matrix adhesion. This adhesion factor scales the edge length of the cubic inclusions, thus reducing the stress transfer area between matrix and filler. Fitting the experimental data with the modified Paul model provides reasonable kadh for PA66, PBT, PP, PE-LD and BR which are in line with their surface energies. Further analysis showed that stiffening only occurs if kadh exceeds [Formula: see text] and depends on the ratio of matrix modulus and filler modulus. The modified model allows for a quick calculation of any particle filled composites for known matrix modulus EM, filler modulus EF, filler volume content vF and adhesion factor kadh. Thus, finite element analysis (FEA) simulations of any particle filled polymer parts as well as materials selection are significantly eased. FEA of cubic and hexagonal EV arrangements show that stress distributions within the EV exhibit more shear stresses if one deviates from the cubic arrangement. At high filler contents the assumption that the property of the EV is representative for the whole composite, holds only for filler volume contents up to 15 or 20% (corresponding to 30 to 40 weight %). Thus, for vast majority of commercially available particulate composites, the modified model can be applied. Furthermore, this indicates that the cube in cube approach reaches two limits: (i) the occurrence of increasing shear stresses at filler contents above 20% due to deviations of EV arrangements or spatial filler distribution from cubic arrangements (singular), and (ii) increasing interaction between particles with the formation of particle network within the matrix violating the EV assumption of their homogeneous dispersion.
This paper addresses long-term historical changes in solar irradiance in West Africa (3 to 20° N and 20° W to 16° E) and the implications for photovoltaic systems. Here, we use satellite irradiance (Surface Solar Radiation Data Set – Heliosat, Edition 2.1 – SARAH-2.1) and temperature data from a reanalysis (ERA5) to derive photovoltaic yields. Based on 35 years of data (1983–2017), the temporal and regional variability as well as long-term trends in global and direct horizontal irradiance are analyzed. Furthermore, a detailed time series analysis is undertaken at four locations. According to the high spatial resolution SARAH-2.1 data record (0.05°×0.05°), solar irradiance is largest (up to a 300 W m−2 daily average) in the Sahara and the Sahel zone with a positive trend (up to 5 W m−2 per decade) and a lower temporal variability (<75 W m−2 between 1983 and 2017 for daily averages). In contrast, the solar irradiance is lower in southern West Africa (between 200 W m−2 and 250 W m−2) with a negative trend (up to −5 W m−2 per decade) and a higher temporal variability (up to 150 W m−2). The positive trend in the north is mostly connected to the dry season, whereas the negative trend in the south occurs during the wet season. Both trends show 95 % significance. Photovoltaic (PV) yields show a strong meridional gradient with the lowest values of around 4 kWh kWp−1 in southern West Africa and values of more than 5.5 kWh kWp−1 in the Sahara and Sahel zone.
Atmospheric aerosols affect the power production of solar energy systems. Their impact depends on both the atmospheric conditions and the solar technology employed. By being a region with a lack in power production and prone to high solar insolation, West Africa shows high potential for the application of solar power systems. However, dust outbreaks, containing high aerosol loads, occur especially in the Sahel, located between the Saharan desert in the north and the Sudanian Savanna in the south. They might affect the whole region for several days with significant effects on power generation. This study investigates the impact of atmospheric aerosols on solar energy production for the example year 2006 making use of six well instrumented sites in West Africa. Two different solar power technologies, a photovoltaic (PV) and a parabolic through (PT) power plant, are considered. The daily reduction of solar power due to aerosols is determined over mostly clear-sky days in 2006 with a model chain combining radiative transfer and technology specific power generation. For mostly clear days the local daily reduction of PV power (at alternating current) (PVAC) and PT power (PTP) due to the presence of aerosols lies between 13 % and 22 % and between 22 % and 37 %, respectively. In March 2006 a major dust outbreak occurred, which serves as an example to investigate the impact of an aerosol extreme event on solar power. During the dust outbreak, daily reduction of PVAC and PTP of up to 79 % and 100 % occur with a mean reduction of 20 % to 40 % for PVAC and of 32 % to 71 % for PTP during the 12 days of the event.
Impact of atmospheric aerosols on photovoltaic energy production - Scenario for the Sahel zone
(2017)
Photovoltaic (PV) energy is one option to serve the rising global energy need with low environmental impact. PV is of particular interest for local energy solutions in developing countries prone to high solar insolation. In order to assess the PV potential of prospective sites, combining knowledge of the atmospheric state modulating solar radiation and the PV performance is necessary. The present study discusses the PV power as function of atmospheric aerosols in the Sahel zone for clear-sky-days. Daily yields for a polycrystalline silicon PV module are reduced by up to 48 % depending on the climatologically-relevant aerosol abundances.
Protocol for conducting advanced cyclic tests in lithium-ion batteries to estimate capacity fade
(2024)
Using advanced cyclic testing techniques improves accuracy in estimating capacity fade and incorporates real-world scenarios in battery cycle aging assessment. Here, we present a protocol for conducting cyclic tests in lithium-ion batteries to estimate capacity fade. We describe steps for implementing strategies for accounting for variations in rest periods, charge-discharge rates, and temperatures. We also detail procedures for validating tests experimentally within a climate-controlled chamber and for developing an empirical model to estimate capacity fading under various testing objectives. For complete details on the use and execution of this protocol, please refer to Mulpuri et al.1.
Battery lifespan estimation is essential for effective battery management systems, aiding users and manufacturers in strategic planning. However, accurately estimating battery capacity is complex, owing to diverse capacity fading phenomena tied to factors such as temperature, charge-discharge rate, and rest period duration. In this work, we present an innovative approach that integrates real-world driving behaviors into cyclic testing. Unlike conventional methods that lack rest periods and involve fixed charge-discharge rates, our approach involves 1000 unique test cycles tailored to specific objectives and applications, capturing the nuanced effects of temperature, charge-discharge rate, and rest duration on capacity fading. This yields comprehensive insights into cell-level battery degradation, unveiling growth patterns of the solid electrolyte interface (SEI) layer and lithium plating, influenced by cyclic test parameters. The results yield critical empirical relations for evaluating capacity fading under specific testing conditions.
The utilization of simulation procedures is gaining increasing attention in the product development of extrusion blow molded parts. However, some simulation steps, like the simulation of shrinkage and warpage, are still associated with uncertainties. The reason for this is on the one hand a lack of standardized interfaces for the transfer of simulation data between different simulation tools, and on the other hand the complex time-, temperature- and process-dependent material behavior of the used semi crystalline polymers. Using a new vendor neutral interface standard for the data transfer, the shrinkage analysis of a simple blow molded part is investigated and compared to experimental data. A linear viscoelastic material model in combination with an orthotropic process- and temperature-dependent thermal expansion coefficient is used for the shrinkage prediction. A good agreement is observed. Finally, critical parameters in the simulation models that strongly influence the shrinkage analysis are identified by a sensitivity study.
Qualitätsverbesserung und Zeitersparnis bei der Stipendienvergabe durch automatisierten Workflow
(2013)
Für die Vergabe der Deutschlandstipendien hatte die Hochschule anfangs ein Verfahren festgelegt, das viel manuelle Arbeitsschritte umfasst: Die Studierenden hatten ihre Bewerbungsunterlagen schriftlich einzureichen. Dazu gehörten neben einem Motivationsschreiben, einem Ausdruck des aktuellen Notenspiegels alle weiteren Referenzen zur Einschätzung der Bewerbung gemäß den gesetzlichen Auswahlkriterien. Als Grundlage zur Bewertung der „sozialen Kriterien“ sollten die Bewerberinnen und Bewerber ein Gutachten eines Professors oder einer Professorin der Hochschule einholen.
Das sogenannte „Deutschlandstipendium“ ist 2010 ins Leben gerufen worden. Gemäß den gesetzlichen Vorgaben sollen die Stipendien nach Begabung und Leistung vergeben werden. Darüber hinaus sollen auch gesellschaftliches Engagement oder besondere soziale, familiäre oder persönliche Umstände berücksichtigt werden. Bei der Finanzierung sind die Hochschulen zunächst auf das Einwerben privater Fördermittel angewiesen, die von Bund und Land um denselben Betrag aufgestockt werden. Die privaten Mittelgeber können für die von ihnen anteilig finanzierten Stipendien festlegen, aus welchen Studiengängen ihre Stipendiaten ausgewählt werden sollen. Die Hochschulen haben jedoch darauf zu achten, dass ein Drittel aller zu vergebenden Stipendien ohne eine entsprechende Zweckbindung vergeben werden. Einen direkten Einfluss auf die Auswahl einzelner Kandidaten dürfen die Förderer nicht haben. Vor diesem Hintergrund sind die Hochschulen angehalten, Anreize für private Förderer zu schaffen und parallel Bewerbungs- und Auswahlverfahren zu konzipieren, die die genannten gesetzlichen Vorgaben einhalten. Dadurch entsteht bei den Hochschulen ein erheblicher Verwaltungsaufwand. Zu dessen Reduzierung wird in diesem Artikel ein transparenter, nachvollziehbarer, zeit- und kostensparender Prozess durch einen programmierten Workflow beschrieben.
Der Nutzen von Prozessmanagement für die Effizienz und Effektivität der Organisation von Unternehmen ist vielfach bestätigt. Eine Studie der gfo-Gesellschaft für Organisation stellt fest, dass der Umsetzungsgrad der Prozessorganisation in Unternehmen dennoch mangelhaft ist. Es fehlt die Unterstützung der Leitung, die selbst noch überwiegend funktional organisiert ist.
Am Beispiel einer jahrelang in Präsenz gelehrten Veranstaltung mit Vorlesungen, Übungen und Laborpraktika wird gezeigt, wie die Vermittlung prüfungsrelevanter Kompetenzen auch „online“ gelang. Das passende „Setting“ des Lehr- und Lernprozesses unter Beachtung von Handlungsempfehlungen ist auch für die Zukunft relevant.