Refine
H-BRS Bibliography
- yes (200) (remove)
Departments, institutes and facilities
- Fachbereich Ingenieurwissenschaften und Kommunikation (200) (remove)
Document Type
- Article (200) (remove)
Year of publication
Keywords
- ISM: molecules (6)
- West Africa (4)
- Hydrogen storage (3)
- Lattice Boltzmann Method (3)
- Optimization (3)
- error analysis (3)
- magnetic resonance spectrometers auxiliary equipment (3)
- polyethylene (3)
- pulsars: general (3)
- radiowave spectrometers (3)
In this paper, the performance evaluation of Frequency Modulated Chaotic On-Off Keying (FM-COOK) in AWGN, Rayleigh and Rician fading channels is given. The simulation results show that an improvement in BER can be gained by incorporating the FM modulation with COOK for SNR values less than 10dB in AWGN case and less than 6dB for Rayleigh and Rician fading channels.
Trueness and precision of milled and 3D printed root-analogue implants: A comparative in vitro study
(2023)
Pipeline transport is an efficient method for transporting fluids in energy supply and other technical applications. While natural gas is the classical example, the transport of hydrogen is becoming more and more important; both are transmitted under high pressure in a gaseous state. Also relevant is the transport of carbon dioxide, captured in the places of formation, transferred under high pressure in a liquid or supercritical state and pumped into underground reservoirs for storage. The transport of other fluids is also required in technical applications. Meanwhile, the transport equations for different fluids are essentially the same, and the simulation can be performed using the same methods. In this paper, the effect of control elements such as compressors, regulators and flaptraps on the stability of fluid transport simulations is studied. It is shown that modeling of these elements can lead to instabilities, both in stationary and dynamic simulations. Special regularization methods were developed to overcome these problems. Their functionality also for dynamic simulations is demonstrated for a number of numerical experiments.
The general method of topological reduction for the network problems is presented on example of gas transport networks. The method is based on a contraction of series, parallel and tree-like subgraphs for the element equations of quadratic, power law and general monotone dependencies. The method allows to reduce significantly the complexity of the graph and to accelerate the solution procedure for stationary network problems. The method has been tested on a large set of realistic network scenarios. Possible extensions of the method have been described, including triangulated element equations, continuation of the equations at infinity, providing uniqueness of solution, a choice of Newtonian stabilizer for nearly degenerated systems. The method is applicable for various sectors in the field of energetics, including gas networks, water networks, electric networks, as well as for coupling of different sectors.
The temperature of photovoltaic modules is modelled as a dynamic function of ambient temperature, shortwave and longwave irradiance and wind speed, in order to allow for a more accurate characterisation of their efficiency. A simple dynamic thermal model is developed by extending an existing parametric steady-state model using an exponential smoothing kernel to include the effect of the heat capacity of the system. The four parameters of the model are fitted to measured data from three photovoltaic systems in the Allgäu region in Germany using non-linear optimisation. The dynamic model reduces the root-mean-square error between measured and modelled module temperature to 1.58 K on average, compared to 3.03 K for the steady-state model, whereas the maximum instantaneous error is reduced from 20.02 to 6.58 K.
Solar photovoltaic power output is modulated by atmospheric aerosols and clouds and thus contains valuable information on the optical properties of the atmosphere. As a ground-based data source with high spatiotemporal resolution it has great potential to complement other ground-based solar irradiance measurements as well as those of weather models and satellites, thus leading to an improved characterisation of global horizontal irradiance. In this work several algorithms are presented that can retrieve global tilted and horizontal irradiance and atmospheric optical properties from solar photovoltaic data and/or pyranometer measurements. The method is tested on data from two measurement campaigns that took place in the Allgäu region in Germany in autumn 2018 and summer 2019, and the results are compared with local pyranometer measurements as well as satellite and weather model data. Using power data measured at 1 Hz and averaged to 1 min resolution along with a non-linear photovoltaic module temperature model, global horizontal irradiance is extracted with a mean bias error compared to concurrent pyranometer measurements of 5.79 W m−2 (7.35 W m−2) under clear (cloudy) skies, averaged over the two campaigns, whereas for the retrieval using coarser 15 min power data with a linear temperature model the mean bias error is 5.88 and 41.87 W m−2 under clear and cloudy skies, respectively.
During completely overcast periods the cloud optical depth is extracted from photovoltaic power using a lookup table method based on a 1D radiative transfer simulation, and the results are compared to both satellite retrievals and data from the Consortium for Small-scale Modelling (COSMO) weather model. Potential applications of this approach for extracting cloud optical properties are discussed, as well as certain limitations, such as the representation of 3D radiative effects that occur under broken-cloud conditions. In principle this method could provide an unprecedented amount of ground-based data on both irradiance and optical properties of the atmosphere, as long as the required photovoltaic power data are available and properly pre-screened to remove unwanted artefacts in the signal. Possible solutions to this problem are discussed in the context of future work.
Salts and proteins comprise two of the basic molecular components of biological materials. Kosmotropic/chaotropic co-solvation and matching ion water affinities explain basic ionic effects on protein aggregation observed in simple solutions. However, it is unclear how these theories apply to proteins in complex biological environments and what the underlying ionic binding patterns are. Using the positive ion Ca2+ and the negatively charged membrane protein SNAP25, we studied ion effects on protein oligomerization in solution, in native membranes and in molecular dynamics (MD) simulations. We find that concentration-dependent ion-induced protein oligomerization is a fundamental chemico-physical principle applying not only to soluble but also to membrane-anchored proteins in their native environment. Oligomerization is driven by the interaction of Ca2+ ions with the carboxylate groups of aspartate and glutamate. From low up to middle concentrations, salt bridges between Ca2+ ions and two or more protein residues lead to increasingly larger oligomers, while at high concentrations oligomers disperse due to overcharging effects. The insights provide a conceptual framework at the interface of physics, chemistry and biology to explain binding of ions to charged protein surfaces on an atomistic scale, as occurring during protein solubilisation, aggregation and oligomerization both in simple solutions and membrane systems.
Die Norm EN ISO 13849-1 stellt explizite Anforderungen an sicherheitsgerichtete SPS-Software. Wie lassen sich diese im Maschinenbau praxisgerecht umsetzen? Mit dieser Frage hat sich ein von der DGUV gefördertes und an der Hochschule Bonn-Rhein-Sieg durchgeführtes Projekt beschäftigt. Der Beitrag skizziert die Vorgehensweise zur möglichen Umsetzung der normativen Anforderungen. Diese Vorgehensweise ist unabhängig von der verwendeten Sicherheits-SPS und daher allgemein anwendbar. Es wird auf insgesamt 10 dokumentierte Beispiele und einen ausführlichen Forschungsbericht verwiesen, die downloadbar sind.
DeltaV Neural ist eine Softwareapplikation innerhalb des Prozessautomatisierungssystems DeltaV, die es dem Anwender ermöglicht, auf einfache Art und Weise Softsensoren zu konfigurieren. Softsensoren besitzen die Aufgabe, schwer messbare oder nur in großen Zeitabständen ermittelbare Prozessausgangsgrößen mittels einfacher und schneller messbarer Ersatzmessgrößen zu schätzen bzw. vorherzusagen.
Dem RTPM (Real-Time Performance Monitoring) wurde in den letzten Jahren in der Automatisierungstechnik immer mehr Beachtung geschenkt. Drei ausgewählte Aspekte des RPTM werden behandelt: Alarmanalyse, Reglerperformance und Stelleinrichtungen. Die Reduktion von Alarmmeldungen mit Hilfe einer Alarmanalyse wird mit Hilfe von Beispielen aus der Industrie veranschaulicht. Ziel einer Analyse ist die Identifikation von (1) falschen Alarmgrenzen, (2) Reglern, bei denen Störungen im Handbetrieb ausgeregelt werden, (3) Reglern, bei denen Betriebspunktänderungen im Handbetrieb ausgeführt werden, (4) Reglern mit Stellgrößen bei 0% oder 100%, (5) falschen Reglerparametern sowie (6) Fehlern in der Messtechnik, Antrieben, Klappen oder Ventilen. Die industrielle Anwendung der Überwachung der Reglerperformance wird anhand des in das Prozessautomatisierungssystem DeltaV von Emerson Process Management integrierten Softwareproduktes DeltaV Inspect erläutert. DeltaV überwacht und bewertet (1) die Bereichsüberschreitungen der Regelgrößen und der Stellsignale, (2) die Betriebsarten (Hand oder Automatik) und (3) die Regelungsgüte. Die Regelungsgüte wird bei einem konstanten Sollwert und stochastischen Störungen aus dem Unterschied zwischen der tatsächlichen und der theoretisch erreichbaren Varianz des Regelfehlers berechnet. Anstelle einer Korrelations- bzw. Regressionsanalyse wird die theoretisch erreichbare minimale Varianz aus der aktuellen Varianz des Regelfehlers und der Varianz der Abweichung der aufeinander folgenden Regelfehlerabtastwerte berechnet.
Herein we report an update to ACPYPE, a Python3 tool that now properly converts AMBER to GROMACS topologies for force fields that utilize nondefault and nonuniform 1–4 electrostatic and nonbonded scaling factors or negative dihedral force constants. Prior to this work, ACPYPE only converted AMBER topologies that used uniform, default 1–4 scaling factors and positive dihedral force constants. We demonstrate that the updated ACPYPE accurately transfers the GLYCAM06 force field from AMBER to GROMACS topology files, which employs non-uniform 1–4 scaling factors as well as negative dihedral force constants. Validation was performed using β-d-GlcNAc through gas-phase analysis of dihedral energy curves and probability density functions. The updated ACPYPE retains all of its original functionality, but now allows the simulation of complex glycomolecular systems in GROMACS using AMBER-originated force fields. ACPYPE is available for download at https://github.com/alanwilter/acpype.
Ein Projektvertrag bietet den Geschäftspartnern rechtliche Sicherheit. Häufig wird er von Anwälten aufgesetzt. Insbesondere in kleinen und mittelständischen Unternehmen ist es aber auch oft der Projektleiter, der den Vertrag formuliert. Prof. Dr. Uwe Braehmer erklärt, unter welchen Bedingungen man einen Vertrag ohne juristische Beratung erstellen kann und liefert eine Checkliste mit den Regelungen, die ein Vertrag enthalten sollte.
Fallstrick Arbeitsrecht
(2005)
Ghana suffers from frequent power outages, which can be compensated by off-grid energy solutions. Photovoltaic-hybrid systems become more and more important for rural electrification due to their potential to offer a clean and cost-effective energy supply. However, uncertainties related to the prediction of electrical loads and solar irradiance result in inefficient system control and can lead to an unstable electricity supply, which is vital for the high reliability required for applications within the health sector. Model predictive control (MPC) algorithms present a viable option to tackle those uncertainties compared to rule-based methods, but strongly rely on the quality of the forecasts. This study tests and evaluates (a) a seasonal autoregressive integrated moving average (SARIMA) algorithm, (b) an incremental linear regression (ILR) algorithm, (c) a long short-term memory (LSTM) model, and (d) a customized statistical approach for electrical load forecasting on real load data of a Ghanaian health facility, considering initially limited knowledge of load and pattern changes through the implementation of incremental learning. The correlation of the electrical load with exogenous variables was determined to map out possible enhancements within the algorithms. Results show that all algorithms show high accuracies with a median normalized root mean square error (nRMSE) <0.1 and differing robustness towards load-shifting events, gradients, and noise. While the SARIMA algorithm and the linear regression model show extreme error outliers of nRMSE >1, methods via the LSTM model and the customized statistical approaches perform better with a median nRMSE of 0.061 and stable error distribution with a maximum nRMSE of <0.255. The conclusion of this study is a favoring towards the LSTM model and the statistical approach, with regard to MPC applications within photovoltaic-hybrid system solutions in the Ghanaian health sector.
This work proposes a novel approach for probabilistic end-to-end all-sky imager-based nowcasting with horizons of up to 30 min using an ImageNet pre-trained deep neural network. The method involves a two-stage approach. First, a backbone model is trained to estimate the irradiance from all-sky imager (ASI) images. The model is then extended and retrained on image and parameter sequences for forecasting. An open access data set is used for training and evaluation. We investigated the impact of simultaneously considering global horizontal (GHI), direct normal (DNI), and diffuse horizontal irradiance (DHI) on training time and forecast performance as well as the effect of adding parameters describing the irradiance variability proposed in the literature. The backbone model estimates current GHI with an RMSE and MAE of 58.06 and 29.33 W m−2, respectively. When extended for forecasting, the model achieves an overall positive skill score reaching 18.6 % compared to a smart persistence forecast. Minor modifications to the deterministic backbone and forecasting models enables the architecture to output an asymmetrical probability distribution and reduces training time while leading to similar errors for the backbone models. Investigating the impact of variability parameters shows that they reduce training time but have no significant impact on the GHI forecasting performance for both deterministic and probabilistic forecasting while simultaneously forecasting GHI, DNI, and DHI reduces the forecast performance.
The introduction of new steering conceptsSteer-by-Wire (SBW) gives possibility to replace theconventional steering wheel by an alternative userinterface such as a sidestick. In SBW system the sidestickcan be used as user input element instead of a steeringwheel. The implementation of sidestick in the Human-Machine-Interface (HMI) allows combiningthe conventional steering consisting of a steeringwheel, an accelerator and a brake pedal into a singleelement. Also the implementation of the sidestickcreates new, interesting and flexible design optionswhich can be used to transform the driver’s spatialenvironment. This article describes an active sidestickfor a vehicle which has been developed, integrated andtested in accordance of haptic, ergonomic and safetyrelevant requirements. The control strategies used forthe active attenuators of the sidestick have beeninvestigated and optimised using a Simulink model.
Novel methods for contingency analysis of gas transport networks are presented. They are motivated by the transition of our energy system where hydrogen plays a growing role. The novel methods are based on a specific method for topological reduction and so-called supernodes. Stationary Euler equations with advanced compressor thermodynamics and a gas law allowing for gas compositions with up to 100% hydrogen are used. Several measures and plots support an intuitive comparison and analysis of the results. In particular, it is shown that the newly developed methods can estimate locations and magnitudes of additional capacities (injection, buffering, storage etc.) with a reasonable performance for networks of relevant composition and size.
Alkaline methanol oxidation is an important electrochemical process in the design of efficient fuel cells. Typically, a system of ordinary differential equations is used to model the kinetics of this process. The fitting of the parameters of the underlying mathematical model is performed on the basis of different types of experiments, characterizing the fuel cell. In this paper, we describe generic methods for creation of a mathematical model of electrochemical kinetics from a given reaction network, as well as for identification of parameters of this model. We also describe methods for model reduction, based on a combination of steady-state and dynamical descriptions of the process. The methods are tested on a range of experiments, including different concentrations of the reagents and different voltage range.
An Universitäten und Fachhochschulen ist die Mathematik-Ausbildung eines der Nadelöhre für angehende Ingenieurinnen und Ingenieure. Viele Studierende der Ingenieurwissenschaften scheitern in den ersten Studiensemestern an den Anforderungen der Mathematik. Lehrende, Fach- und Hochschuldidaktiker/innen und zunehmend auch Fachvertretungen und Verbände stellen sich die Frage, was an den Fakultäten und Fachbereichen getan werden kann, damit Studierende ihre mathematischen Fähigkeiten vergrößern und den anspruchsvollen Studienweg zur Ingenieurin oder zum Ingenieur meistern können.
Unternehmen agieren in einem dynamischen Umfeld mit hoher Komplexität und Unsicherheit. Um dabei langfristig wettbewerbsfähig zu bleiben, ist eine kontinuierliche Optimierung der Prozesse erforderlich. Eine konsequente Prozessorientierung wird daher seit langem angestrebt. Zur Ermittlung des aktuellen Standes der Prozessorganisation in deutschen Unternehmen hat die Gesellschaft für Organisation e. V. (gfo) eine Studie durchführen lassen, deren erste Ergebnisse hier vorgestellt werden.
In this paper, a gas-to-power (GtoP) system for power outages is digitally modeled and experimentally developed. The design includes a solid-state hydrogen storage system composed of TiFeMn as a hydride forming alloy (6.7 kg of alloy in five tanks) and an air-cooled fuel cell (maximum power: 1.6 kW). The hydrogen storage system is charged under room temperature and 40 bar of hydrogen pressure, reaching about 110 g of hydrogen capacity. In an emergency use case of the system, hydrogen is supplied to the fuel cell, and the waste heat coming from the exhaust air of the fuel cell is used for the endothermic dehydrogenation reaction of the metal hydride. This GtoP system demonstrates fast, stable, and reliable responses, providing from 149 W to 596 W under different constant as well as dynamic conditions. A comprehensive and novel simulation approach based on a network model is also applied. The developed model is validated under static and dynamic power load scenarios, demonstrating excellent agreement with the experimental results.
Interne Audits können mehr
(2024)
Dieser Beitrag zeigt, wie das Deutsche Zentrum für Luft- und Raumfahrt e. V. (DLR) Zufriedenheitsanalysen aus zwei Sichtweisen durchführt: Aus Sicht der Auditoren und aus Sicht der Managementbeauftragten der auditierten Institute und Einrichtungen. Die Ergebnisse fließen in die jährliche Auditprogrammplanung ein. Damit wird der Nutzen von internen Audits gesteigert.
Earth’s nearest candidate supermassive black hole lies at the centre of the Milky Way1. Its electromagnetic emission is thought to be powered by radiatively inefficient accretion of gas from its environment2, which is a standard mode of energy supply for most galactic nuclei. X-ray measurements have already resolved a tenuous hot gas component from which the black hole can be fed3. The magnetization of the gas, however, which is a crucial parameter determining the structure of the accretion flow, remains unknown. Strong magnetic fields can influence the dynamics of accretion, remove angular momentum from the infalling gas4, expel matter through relativistic jets5 and lead to synchrotron emission such as that previously observed6, 7, 8. Here we report multi-frequency radio measurements of a newly discovered pulsar close to the Galactic Centre9, 10, 11, 12 and show that the pulsar’s unusually large Faraday rotation (the rotation of the plane of polarization of the emission in the presence of an external magnetic field) indicates that there is a dynamically important magnetic field near the black hole. If this field is accreted down to the event horizon it provides enough magnetic flux to explain the observed emission—from radio to X-ray wavelengths—from the black hole.
Multi-epoch searches for relativistic binary pulsars and fast transients in the Galactic Centre
(2021)
Comparación de perfiles de ansiedad matemática entre estudiantes mexicanos y estudiantes alemanes
(2017)
Se determinan los perfiles de ansiedad matemática de estudiantes mexicanos y estudiantes alemanes por medio de la aplicación de un cuestionario desarrollado ex profeso. La ansiedad matemática se define en términos de tres descriptores: creencias, actitudes y emociones. Los autores definen un Índice de Ansiedad Matemática, al aplicarlo encuentran que los estudiantes alemanes presentan un valor mayor de dicho Índice, lo que significa que tienen una mayor nivel de ansiedad matemática. Las diferencias en los valores del Índice de Ansiedad Matemática se interpretan en términos de diferencias culturales. La interpretación parece ser consistente con las diferencias culturales y se ajusta a los resultados obtenidos.
We consider the Hopfield model with n neurons and an increasing number p=p(n) of randomly chosen patterns and use Stein's method to obtain rates of convergence for the central limit theorem of overlap parameters, which holds for every fixed choice of the overlap parameter for almost all realisations of the random patterns.
A Fourier scatterometry setup is evaluated to recover the key parameters of optical phase gratings. Based on these parameters, systematic errors in the printing process of two-photon polymerization (TPP) gray-scale lithography three-dimensional printers can be compensated, namely tilt and curvature deviations. The proposed setup is significantly cheaper than a confocal microscope, which is usually used to determine calibration parameters for compensation of the TPP printing process. The grating parameters recovered this way are compared to those obtained with a confocal microscope. A clear correlation between confocal and scatterometric measurements is first shown for structures containing either tilt or curvature. The correlation is also shown for structures containing a mixture of tilt and curvature errors (squared Pearson coefficient r2 = 0.92). This compensation method is demonstrated on a TPP printer: a diffractive optical element printed with correction parameters obtained from Fourier scatterometry shows a significant reduction in noise as compared to the uncompensated system. This verifies the successful reduction of tilt and curvature errors. Further improvements of the method are proposed, which may enable the measurements to become more precise than confocal measurements in the future, since scatterometry is not affected by the diffraction limit.
Das AD 2000-Regelwerk ist der dominierende Standard für den Druckbehälterbau in Deutschland. Die bereits in anderen europäischen Ländern verbreitete DIN EN 13445 findet kaum Berücksichtigung. Dies allerdings zu Unrecht, denn ein aktueller Vergleich, der im Rahmen einer Bachelorarbeit durchgeführte wurde, zeigt: Die EN 13445 ist zu einer echten Alternative gereift. Gerade das Hauptargument gegen eine Umstellung, die steigenden Kosten, ist längst überholt.
The mechanical properties of plastic components, especially if they are made of semi-crystalline polymers, are considerably influenced by the process conditions. The degree of crystallization influences thermal and mechanical properties. Even more important is the orientation of molecules due to stretching of the polymer melt. Anisotropic material properties are the result of such orientations. Up to now all these effects are not considered within the simulation models of blow molded parts.
This study investigates the initial stage of the thermo-mechanical crystallization behavior for uni- and biaxially stretched polyethylene. The models are based on a mesoscale molecular dynamics approach. We take constraints that occur in real-life polymer processing into account, especially with respect to the blowing stage of the extrusion blow-molding process. For this purpose, we deform our systems using a wide range of stretching levels before they are quenched. We discuss the effects of the stretching procedures on the micro-mechanical state of the systems, characterized by entanglement behavior and nematic ordering of chain segments. For the cooling stage, we use two different approaches which allow for free or hindered shrinkage, respectively. During cooling, crystallization kinetics are monitored: We precisely evaluate how the interplay of chain length, temperature, local entanglements and orientation of chain segments influence crystallization behavior. Our models reveal that the main stretching direction dominates microscopic states of the different systems. We are able to show that crystallization mainly depends on the (dis-)entanglement behavior. Nematic ordering plays a secondary role.
In this study, we investigate the thermo-mechanical relaxation and crystallization behavior of polyethylene using mesoscale molecular dynamics simulations. Our models specifically mimic constraints that occur in real-life polymer processing: After strong uniaxial stretching of the melt, we quench and release the polymer chains at different loading conditions. These conditions allow for free or hindered shrinkage, respectively. We present the shrinkage and swelling behavior as well as the crystallization kinetics over up to 600 ns simulation time. We are able to precisely evaluate how the interplay of chain length, temperature, local entanglements and orientation of chain segments influences crystallization and relaxation behavior. From our models, we determine the temperature dependent crystallization rate of polyethylene, including crystallization onset temperature.
Anfang Januar 2007 trat in Nordrhein-Westfalen (NRW) das Hochschulfreiheitsgesetz (HFG) in Kraft. Mit dem HFG hat sich die Landesregierung in NRW weit aus der Detailsteuerung der Hochschulen zurückgezogen und tritt lediglich noch für existenzielle Schadensereignisse ein. So sind die Hochschulen – Universitäten und Fachhochschulen – in NRW keine staatlichen Einrichtungen mehr, sondern Körperschaften des öffentlichen Rechts in staatlicher Trägerschaft. Hiermit folgt das neue Hochschulgesetz dem hochschulpolitischen Paradigmenwechsel von einem staatlich geplanten, weitgehend einheitlich gestalteten System zu einem durch Profilbildung und Wettbewerb geprägten Hochschulsystem. In diesem Artikel werden die damit verbundenen Problemstellungen und Lösungsoptionen aufgezeigt und als Empfehlung die Einführung eines Chancen- und Risikomanagements beschrieben.
Design and Analysis of an OFDM-Based Orthogonal Chaotic Vector Shift Keying Communication System
(2018)
We propose a new non-coherent multicarrier spread-spectrum system that combines orthogonal chaotic vector shift keying (OCVSK) and orthogonal frequency-division multiplexing (OFDM). The system enhances OCVSK by sending multiple groups of information sequences with the same orthogonal chaotic vector reference sequences over the selected subcarriers. Each group carries M information bits and is separated from other groups by orthogonal chaotic reference signals. We derive the information rate enhancement (IRE) and the energy saving enhancement (ESE) factors as well as the bit error rate theory of OFDM-OCVSK under additive white Gaussian noise and multipath Rayleigh fading channels and compare the results with conventional OCVSK systems. For large group numbers, the results show that the IRE and ESE factors approachM×100% andM/(M+1)×100%, respectively, and thus outperform OCVSK systems. The complexity analysis of the proposed scheme as compared with OFDM-DCSK shows a significant reduction in the number of complex multiplications required.
The lattice Boltzmann method (LBM) stands apart from conventional macroscopic approaches due to its low numerical dissipation and reduced computational cost, attributed to a simple streaming and local collision step. While this property makes the method particularly attractive for applications such as direct noise computation, it also renders the method highly susceptible to instabilities. A vast body of literature exists on stability-enhancing techniques, which can be categorized into selective filtering, regularized LBM, and multi-relaxation time (MRT) models. Although each technique bolsters stability by adding numerical dissipation, they act on different modes. Consequently, there is not a universal scheme optimally suited for a wide range of different flows. The reason for this lies in the static nature of these methods; they cannot adapt to local or global flow features. Still, adaptive filtering using a shear sensor constitutes an exception to this. For this reason, we developed a novel collision operator that uses space- and time-variant collision rates associated with the bulk viscosity. These rates are optimized by a physically informed neural net. In this study, the training data consists of a time series of different instances of a 2D barotropic vortex solution, obtained from a high-order Navier–Stokes solver that embodies desirable numerical features. For this specific text case our results demonstrate that the relaxation times adapt to the local flow and show a dependence on the velocity field. Furthermore, the novel collision operator demonstrates a better stability-to-precision ratio and outperforms conventional techniques that use an empirical constant for the bulk viscosity.
Atomic oxygen is a key species in the mesosphere and thermosphere of Venus. It peaks in the transition region between the two dominant atmospheric circulation patterns, the retrograde super-rotating zonal flow below 70 km and the subsolar to antisolar flow above 120 km altitude. However, past and current detection methods are indirect and based on measurements of other molecules in combination with photochemical models. Here, we show direct detection of atomic oxygen on the dayside as well as on the nightside of Venus by measuring its ground-state transition at 4.74 THz (63.2 µm). The atomic oxygen is concentrated at altitudes around 100 km with a maximum column density on the dayside where it is generated by photolysis of carbon dioxide and carbon monoxide. This method enables detailed investigations of the Venusian atmosphere in the region between the two atmospheric circulation patterns in support of future space missions to Venus.
Molecular modeling is an important subdomain in the field of computational modeling, regarding both scientific and industrial applications. This is because computer simulations on a molecular level are a virtuous instrument to study the impact of microscopic on macroscopic phenomena. Accurate molecular models are indispensable for such simulations in order to predict physical target observables, like density, pressure, diffusion coefficients or energetic properties, quantitatively over a wide range of temperatures. Thereby, molecular interactions are described mathematically by force fields. The mathematical description includes parameters for both intramolecular and intermolecular interactions. While intramolecular force field parameters can be determined by quantum mechanics, the parameterization of the intermolecular part is often tedious. Recently, an empirical procedure, based on the minimization of a loss function between simulated and experimental physical properties, was published by the authors. Thereby, efficient gradient-based numerical optimization algorithms were used. However, empirical force field optimization is inhibited by the two following central issues appearing in molecular simulations: firstly, they are extremely time-consuming, even on modern and high-performance computer clusters, and secondly, simulation data is affected by statistical noise. The latter provokes the fact that an accurate computation of gradients or Hessians is nearly impossible close to a local or global minimum, mainly because the loss function is flat. Therefore, the question arises of whether to apply a derivative-free method approximating the loss function by an appropriate model function. In this paper, a new Sparse Grid-based Optimization Workflow (SpaGrOW) is presented, which accomplishes this task robustly and, at the same time, keeps the number of time-consuming simulations relatively small. This is achieved by an efficient sampling procedure for the approximation based on sparse grids, which is described in full detail: in order to counteract the fact that sparse grids are fully occupied on their boundaries, a mathematical transformation is applied to generate homogeneous Dirichlet boundary conditions. As the main drawback of sparse grids methods is the assumption that the function to be modeled exhibits certain smoothness properties, it has to be approximated by smooth functions first. Radial basis functions turned out to be very suitable to solve this task. The smoothing procedure and the subsequent interpolation on sparse grids are performed within sufficiently large compact trust regions of the parameter space. It is shown and explained how the combination of the three ingredients leads to a new efficient derivative-free algorithm, which has the additional advantage that it is capable of reducing the overall number of simulations by a factor of about two in comparison to gradient-based optimization methods. At the same time, the robustness with respect to statistical noise is maintained. This assertion is proven by both theoretical considerations and practical evaluations for molecular simulations on chemical example substances.
In recent years, a plethora of observations with high spectral resolution of sub-millimetre and far-infrared transitions of methylidene (CH), conducted with Herschel and SOFIA, have demonstrated this radical to be a valuable proxy for molecular hydrogen that can be used for characterising molecular gas within the interstellar medium on a Galactic scale, including the CO-dark component. We report the discovery of the 13CH isotopologue in the interstellar medium using the upGREAT receiver on board SOFIA. We have detected the three hyperfine structure components of the ≈2 THz frequency transition from its X2Π1∕2 ground-state towards the high-mass star-forming regions Sgr B2(M), G34.26+0.15, W49(N), and W51E and determined 13CH column densities. The ubiquity of molecules containing carbon in the interstellar medium has turned the determination of the ratio between the abundances of the two stable isotopes of carbon, 12C/13C, into a cornerstone for Galactic chemical evolution studies. Whilst displaying a rising gradient with galactocentric distance, this ratio, when measured using observations of different molecules (CO, H2CO, and others), shows systematic variations depending on the tracer used. These observed inconsistencies may arise from optical depth effects, chemical fractionation, or isotope-selective photo-dissociation. Formed from C+ either through UV-driven or turbulence-driven chemistry, CH reflects the fractionation of C+, and does not show any significant fractionation effects, unlike other molecules that were previously used to determine the 12C/13C isotopic ratio. This makes it an ideal tracer for the 12C/13C ratio throughout the Galaxy. By comparing the derived column densities of 13CH with previously obtained SOFIA data of the corresponding transitions of the main isotopologue 12CH, we therefore derive 12C/13C isotopic ratios toward Sgr B2(M), G34.26+0.15, W49(N) and W51E. Adding our values derived from 12∕13CH to previous calculations of the Galactic isotopic gradient, we derive a revised value of 12C/13C = 5.87(0.45)RGC + 13.25(2.94).
Die allgemeine Konnotation von Technik mit Männlichkeit hat Auswirkungen auf die Berufswahlentscheidungen und das Technikverständnis von jungen Frauen. Nur gut 22 Prozent aller Studierenden in den Ingenieurswissenschaften waren 2014 in Deutschland weiblich (vgl. MonitorING)1. Seit Jahren wird versucht, diese Zahlen nach oben zu korrigieren, indem man Programme für Mädchen und junge Frauen anbietet, die erste Kontakte zu technischen Arbeitsfeldern her stellen. Auch für bereits berufstätige Ingenieurinnen gibt es zahlreiche Förderprogramme, um den Drop-out hochqualiizierter Frauen auf der Karriere leiter zu verhindern. Dennoch verändern sich die prozentualen Anteile von Frauen in ingenieurswissenschaftlichen Studiengängen und Berufen kaum. Aktuelle Studien belegen, dass vor allem kulturell bedingte Erwartungen und Einstellungen hierfür verantwortlich sind (vgl. Paulitz 2012).
The media is considered to be the fourth pillar in a democratic country. It acts as an effective control mechanism to check the other branches of the government. But this is only consequential when the media functions in an independent and transparent fashion with trained and neutral professionals who are aware of the accountability and consequences of their work. All these factors together would further the country as a democratic institution. Traditionally, it was legacy media responsible for a one-to-many communication process. Their goal was to provide information to the citizens. But this changed with development in technology and the use of social media in daily life. The internet brought with it new media formats which are easily accessible but also unstructured. These lowered barriers of entry in the media enabled citizens to become active participants in the communication process. As a result, these citizens developed a different relationship with the already existing media wherein they were not only the receivers to information but also co-producers. Real-time information allows users to communicate with each other and in turn widely generate public opinion on internet platforms. A many-to-many communication style emerged. While on the one hand, this type of discourse could be an opportunity for citizens to exercise their fundamental freedom of speech and expression, it is on the other hand, proving to have a detrimental effect in two parts: Lack of neutrality, polarized views and pre-existing misconceptions on the part of citizens as well as algorithms and formation of echo-chambers on the part of technology. Some questions arise in this scenario about the capability of citizen journalists, the duties they should adhere to along with the enjoyment of their rights and freedoms, the risks involved in an unchecked method of communication and the effect of citizen journalism in the democratic process.
This paper proposes an approach to an ANN-based temperature controller design for a plastic injection moulding system. This design approach is applied to the development of a controller based on a combination of a classical ANN and integrator. The controller provides a fast temperature response and zero steady-state error for three typical heaters (bar, nozzle, and cartridge) for a plastic moulding system. The simulation results in Matlab Simulink software and in comparison to an industrial PID regulator have shown the advantages of the controller, such as significantly less overshoot and faster transient (compared to PID with autotuning) for all examined heaters. In order to verify the proposed approach, the designed ANN controller was implemented and tested using an experimental setup based on an STM32 board.
In addition to the long-term goal of mitigating climate change, the current geopolitical upheavals heighten the urgency to transform Europe's energy system. This involves expanding renewable energies while managing intermittent electricity generation. Hydrogen is a promising solution to balance generation and demand, simultaneously decarbonizing complex applications. To model the energy system's transformation, the project TransHyDE-Sys, funded by the German Federal Ministry of Education and Research, takes an integrated approach beyond traditional energy system analysis, incorporating a diverse range of more detailed methods and tools. Herein, TransHyDE-Sys is situated within the recent policy discussion. It addresses the requirements for energy system modeling to gain insights into transforming the European hydrogen and energy infrastructure. It identifies knowledge gaps in the existing literature on hydrogen infrastructure-oriented energy system modeling and presents the research approach of TransHyDE-Sys. TransHyDE-Sys analyzes the development of hydrogen and energy infrastructures from “the system” and “the stakeholder” perspectives. The integrated modeling landscape captures temporal and spatial interactions among hydrogen, electricity, and natural gas infrastructure, providing comprehensive insights for systemic infrastructure planning. This allows a more accurate representation of the energy system's dynamics and aids in decision-making for achieving sustainable and efficient hydrogen network development integration.
Hand speed is particularly important in boxing both for protection against incoming blows and delivering blows. Sixteen amateur boxers (10 male, 6 female) with varying levels of experience from a boxing gym performed 20 jabs and 20 cross punches in air. The movement was recorded with a small wrist mounted accelerometer under the glove. The maximum velocity of each punch was determined from the RMS acceleration profile. The mean values of the jab maximal velocity was higher than the cross maximal velocity for 9 participants. The cross showed some dependence on reach (Spearman's correlation coefficient r = 0.57) and the jab dependence on experience (Spearman's correlation coefficient r = 0.56). The accelerometer technique has some promise for routine assessment of fist speed.
The elucidation of conformations and relative potential energies (rPEs) of small molecules has a long history across a diverse range of fields. Periodically, it is helpful to revisit what conformations have been investigated and to provide a consistent theoretical framework for which clear comparisons can be made. In this paper, we compute the minima, first- and second-order saddle points, and torsion-coupled surfaces for methanol, ethanol, propan-2-ol, and propanol using consistent high-level MP2 and CCSD(T) methods. While for certain molecules more rigorous methods were employed, the CCSD(T)/aug-cc-pVTZ//MP2/aug-cc-pV5Z theory level was used throughout to provide relative energies of all minima and first-order saddle points. The rPE surfaces were uniformly computed at the CCSD(T)/aug-cc-pVTZ//MP2/aug-cc-pVTZ level. To the best of our knowledge, this represents the most extensive study for alcohols of this kind, revealing some new aspects. Especially for propanol, we report several new conformations that were previously not investigated. Moreover, two metrics are included in our analysis that quantify how the selected surfaces are similar to one another and hence improve our understanding of the relationship between these alcohols.
Automated parameterization of intermolecular pair potentials using global optimization techniques
(2014)
In this work, different global optimization techniques are assessed for the automated development of molecular force fields, as used in molecular dynamics and Monte Carlo simulations. The quest of finding suitable force field parameters is treated as a mathematical minimization problem. Intricate problem characteristics such as extremely costly and even abortive simulations, noisy simulation results, and especially multiple local minima naturally lead to the use of sophisticated global optimization algorithms. Five diverse algorithms (pure random search, recursive random search, CMA-ES, differential evolution, and taboo search) are compared to our own tailor-made solution named CoSMoS. CoSMoS is an automated workflow. It models the parameters’ influence on the simulation observables to detect a globally optimal set of parameters. It is shown how and why this approach is superior to other algorithms. Applied to suitable test functions and simulations for phosgene, CoSMoS effectively reduces the number of required simulations and real time for the optimization task.
Transition point prediction in a multicomponent lattice Boltzmann model: Forcing scheme dependencies
(2018)
The design of a fully superconducting wind power generator is influenced by several factors. Among them, a low number of pole pairs is desirable to achieve low AC losses in the superconducting stator winding, which greatly influences the cooling system design and, consecutively, the efficiency of the entire wind power plant. However, it has been identified that a low number of pole pairs in a superconducting generator tends to greatly increase its output voltage, which in turn creates challenging conditions for the necessary power electronic converter. This study highlights the interdependencies between the design of a fully superconducting 10 MW wind power generator and the corresponding design of its power electronic converter.
Die Prognose über den Studienerfolg von Studierenden in MINT-Fächern wird häufig an ihre Prüfungsleistungen in mathematischen und naturwissenschaftlichen Veranstaltungen geknüpft. Die Relevanz von sprachlichen Kompetenzen, insbesondere der Textrezeption und -produktion, für Studium und Berufstätigkeit, gerade auch in ingenieurwissenschaftlichen Betätigungsfeldern, wird sowohl von den Studierenden als auch von Dozent*innen nicht erkannt oder zurückgestellt.
Seit vielen Jahren ist der Übergang von der Schule zur Hochschule eines der zentralen Themen für didaktische Theorien, empirische Untersuchungen und bildungspolitische Diskussionen. Ein dabei identifiziertes großes Problem vieler Studierender ist, dass mit dem Abitur „eine Lebensphase mit meist klar definierten Zielen in überschaubaren räumlichen, familiären und schulischen Strukturen endet“.1) Entscheidet man sich als Studierender gegen die nicht akademische Laufbahn und nimmt ein Hochschulstudium auf, trifft man auf Studienstrukturen und -bedingungen, die einem fremd und chaotisch vorkommen können. Der Weg an die Hochschulen ermöglicht den Individuen eine Reihe von Optionen, ist aber leider auch immer mit Risiken und Unsicherheiten behaftet. Entscheidungen müssen nun selbstständig vorbereitet und getroffen werden und dies in einem Umfeld, das sehr unterschiedlich im Vergleich zur bekannten Schulstruktur sein kann.