Refine
Departments, institutes and facilities
- Fachbereich Angewandte Naturwissenschaften (33)
- Institut für Technik, Ressourcenschonung und Energieeffizienz (TREE) (28)
- Institut für funktionale Gen-Analytik (IFGA) (24)
- Fachbereich Ingenieurwissenschaften und Kommunikation (22)
- Fachbereich Wirtschaftswissenschaften (22)
- Fachbereich Sozialpolitik und Soziale Sicherung (21)
- Fachbereich Informatik (20)
- Internationales Zentrum für Nachhaltige Entwicklung (IZNE) (8)
- Institute of Visual Computing (IVC) (6)
- Institut für Verbraucherinformatik (IVI) (5)
Document Type
- Article (121) (remove)
Year of publication
- 2023 (121) (remove)
Keywords
- COVID-19 (2)
- Conservation practice (2)
- ENaC (2)
- Insect decline (2)
- Lattice Boltzmann Method (2)
- Liebe (2)
- Love (2)
- Pesticides (2)
- Polyamorie (2)
- Polyamory (2)
Electrical signal transmission in power electronic devices takes place through high-purity aluminum bonding wires. Cyclic mechanical and thermal stresses during operation lead to fatigue loads, resulting in premature failure of the wires, which cannot be reliably predicted. The following work presents two fatigue lifetime models calibrated and validated based on experimental fatigue results of an aluminum bonding wire and subsequently transferred and applied to other wire types. The lifetime modeling of Wöhler curves for different load ratios shows good but limited applicability for the linear model. The model can only be applied above 10,000 cycles and within the investigated load range of R = 0.1 to R = 0.7. The nonlinear model shows very good agreement between model prediction and experimental results over the entire investigated cycle range. Furthermore, the predicted Smith diagram is not only consistent in the investigated load range but also in the extrapolated load range from R = −1.0 to R = 0.8. A transfer of both model approaches to other wire types by using their tensile strengths can be implemented as well, although the nonlinear model is more suitable since it covers the entire load and cycle range.
Climate change is increasingly affecting vulnerable groups and resulting in dire social and economic consequences, especially for those in the Global South. Managing current and emerging climate-related risks will require increasing individual’s and communities’ resilience, including enhancing absorptive, adaptive, and transformative capacities. Policymakers are now considering the role that social protection policies and programmes can play in building climate resilience by contributing to these capacities. However, there is a limited understanding of the extent to which social protection instruments can influence these three resilience-related capacities. Lack of assessment tools or frameworks might contribute to limited evidence of social protection’s ability to increase climate resilience. In particular, there appear to be no frameworks or tools that help assess the role of social cash transfers (SCT) in building adaptive capacity. Based on a multi-staged literature review, we develop an adaptive capacity outcomes framework (ACOF) that can help assess SCT’s contribution to building adaptive capacity, and, consequently, resilience. The framework is then tested using impact evaluation and assessment reports from SCT programmes in Indonesia, Zambia, Ethiopia, Bangladesh, and Tanzania. The exercise finds that SCTs alone have a limited contribution to adaptive capacity outcomes, but interventions that combine cash transfers with other components such as nutrition or livelihood training show positive impacts. We find that the ACOF can support assessments of SCT’s contribution towards adaptive capacity. It can help build evidence, evaluate impacts, and through further research, can facilitate learning on SCTs' role in increasing climate resilience.
In the design of robot skills, the focus generally lies on increasing the flexibility and reliability of the robot execution process; however, typical skill representations are not designed for analysing execution failures if they occur or for explicitly learning from failures. In this paper, we describe a learning-based hybrid representation for skill parameterisation called an execution model, which considers execution failures to be a natural part of the execution process. We then (i) demonstrate how execution contexts can be included in execution models, (ii) introduce a technique for generalising models between object categories by combining generalisation attempts performed by a robot with knowledge about object similarities represented in an ontology, and (iii) describe a procedure that uses an execution model for identifying a likely hypothesis of a parameterisation failure. The feasibility of the proposed methods is evaluated in multiple experiments performed with a physical robot in the context of handle grasping, object grasping, and object pulling. The experimental results suggest that execution models contribute towards avoiding execution failures, but also represent a first step towards more introspective robots that are able to analyse some of their execution failures in an explicit manner.
This paper presents a novel approach to address noise, vibration, and harshness (NVH) issues in electrically assisted bicycles (e-bikes) caused by the drive unit. By investigating and optimising the structural dynamics during early product development, NVH can decisively be improved and valuable resources can be saved, emphasising its significance for enhancing riding performance. The paper offers a comprehensive analysis of the e-bike drive unit’s mechanical interactions among relevant components, culminating—to the best of our knowledge—in the development of the first high-fidelity model of an entire e-bike drive unit. The proposed model uses the principles of elastic multi body dynamics (eMBD) to elucidate the structural dynamics in dynamic-transient calculations. Comparing power spectra between measured and simulated motion variables validates the chosen model assumptions. The measurements of physical samples utilise accelerometers, contactless laser Doppler vibrometry (LDV) and various test arrangements, which are replicated in simulations and provide accessibility to measure vibrations onto rotating shafts and stationary structures. In summary, this integrated system-level approach can serve as a viable starting point for comprehending and managing the NVH behaviour of e-bikes.
Host-derived succinate accumulates in the airways during bacterial infection. Here, we show that luminal succinate activates murine tracheal brush (tuft) cells through a signaling cascade involving the succinate receptor 1 (SUCNR1), phospholipase Cβ2, and the cation channel transient receptor potential channel subfamily M member 5 (TRPM5). Stimulated brush cells then trigger a long-range Ca2+ wave spreading radially over the tracheal epithelium through a sequential signaling process. First, brush cells release acetylcholine, which excites nearby cells via muscarinic acetylcholine receptors. From there, the Ca2+ wave propagates through gap junction signaling, reaching also distant ciliated and secretory cells. These effector cells translate activation into enhanced ciliary activity and Cl- secretion, which are synergistic in boosting mucociliary clearance, the major innate defense mechanism of the airways. Our data establish tracheal brush cells as a central hub in triggering a global epithelial defense program in response to a danger-associated metabolite.
Background
Consumers rely heavily on online user reviews when shopping online and cybercriminals produce fake reviews to manipulate consumer opinion. Much prior research focuses on the automated detection of these fake reviews, which are far from perfect. Therefore, consumers must be able to detect fake reviews on their own. In this study we survey the research examining how consumers detect fake reviews online.
Methods
We conducted a systematic literature review over the research on fake review detection from the consumer-perspective. We included academic literature giving new empirical data. We provide a narrative synthesis comparing the theories, methods and outcomes used across studies to identify how consumers detect fake reviews online.
Results
We found only 15 articles that met our inclusion criteria. We classify the most often used cues identified into five categories which were (1) review characteristics (2) textual characteristics (3) reviewer characteristics (4) seller characteristics and (5) characteristics of the platform where the review is displayed.
Discussion
We find that theory is applied inconsistently across studies and that cues to deception are often identified in isolation without any unifying theoretical framework. Consequently, we discuss how such a theoretical framework could be developed.
Introduction: The paper analyses – basing itself on reports and other documents created by different parts of the International Labour Organisation (ILO) – the process which led to the adoption of Social Protection Floor Recommendation No. 202 and the shift in focus of social policy advice towards basic protection and to the Global South countries. We look at the actions of different actors which shape the standard setting and policy stand of the organisation. Objective: To provide a comprehensive analysis of the historical trajectory of ILO social security standards, examining the evolution of principles, conventions, and the global dynamics that have shaped the organization's approach to social protection over time. Materials and methods: The methods include examining ILO documents, relevant subject literature, and the author's participant observations from over twenty-years of service in the ILO's Social Security Department, aiming to provide insights into the decision-making processes within the organization. Conclusion: We conclude that change was brought by: 1) shift in the membership of the ILO and of its decision-making bodies towards the increased presence and powers of representatives from countries of the Global South, 2) the shift in the global development community policy priorities towards poverty reduction, 3) emergence of experimental social assistance schemes in Global South countries, with designs often ignoring principles embedded in the ILO standards. The Social Protection Floor Recommendation complements previous standards in response to the challenges of widespread poverty and informality and spreading atypical forms of employment. It provides two directions of policy responses: 1) formalizing informal employment relationships and 2) expanding universal or targeted rights-based social assistance schemes. Assistance provided by ILO to member states focuses now more on building the non-contributory schemes and on identifying the fiscal space necessary to close the coverage gaps. Nowadays, the ILO must collaborate more than before with other development partners and the main challenge is to build among them awareness and acceptance of the principles of the ILO social security standards.
Nitrosamines have been identified as a probable human carcinogen and thus are of high concern in many manufacturing industries and various matrices (for example pharmaceutical, cosmetic and food products, workplace air or potable- and wastewater). This study aims to analyse nine nitrosamines relevant in the field of occupational safety using a gas chromatography-drift tube ion mobility spectrometry (GC-DT-IMS) system. To do this, single nitrosamine standards as well as a standard mix, each at 0.1 g/L, were introduced via liquid injection. A GC-DT-IMS method capable of separating the nitrosamine signals according to retention time (first dimension) and drift time (second dimension) in 10 min was developed. The system shows excellent selectivity as each nitrosamine gives two signals pertaining to monomer and dimer in the second dimension. For the first time, reduced ion mobility values for nitrosamines were determined, ranging from 1.18 to 2.03 cm2s−1V−1. The high selectivity of the GC-DT-IMS method could provide a definite advantage for monitoring nitrosamines in different manufacturing industries and consumer products.
PURPOSE
Cervical cancer (CC) is caused by a persistent high-risk human papillomavirus (hrHPV) infection. The cervico-vaginal microbiome may influence the development of (pre)cancer lesions. Aim of the study was (i) to evaluate the new CC screening program in Germany for the detection of high-grade CC precursor lesions, and (ii) to elucidate the role of the cervico-vaginal microbiome and its potential impact on cervical dysplasia.
METHODS
The microbiome of 310 patients referred to colposcopy was determined by amplicon sequencing and correlated with clinicopathological parameters.
RESULTS
Most patients were referred for colposcopy due to a positive hrHPV result in two consecutive years combined with a normal PAP smear. In 2.1% of these cases, a CIN III lesion was detected. There was a significant positive association between the PAP stage and Lactobacillus vaginalis colonization and between the severity of CC precursor lesions and Ureaplasma parvum.
CONCLUSION
In our cohort, the new cervical cancer screening program resulted in a low rate of additional CIN III detected. It is questionable whether these cases were only identified earlier with additional HPV testing before the appearance of cytological abnormalities, or the new screening program will truly increase the detection rate of CIN III in the long run. Colonization with U. parvum was associated with histological dysplastic lesions. Whether targeted therapy of this pathogen or optimization of the microbiome prevents dysplasia remains speculative.
A company's financial documents use tables along with text to organize the data containing key performance indicators (KPIs) (such as profit and loss) and a financial quantity linked to them. The KPI’s linked quantity in a table might not be equal to the similarly described KPI's quantity in a text. Auditors take substantial time to manually audit these financial mistakes and this process is called consistency checking. As compared to existing work, this paper attempts to automate this task with the help of transformer-based models. Furthermore, for consistency checking it is essential for the table's KPIs embeddings to encode the semantic knowledge of the KPIs and the structural knowledge of the table. Therefore, this paper proposes a pipeline that uses a tabular model to get the table's KPIs embeddings. The pipeline takes input table and text KPIs, generates their embeddings, and then checks whether these KPIs are identical. The pipeline is evaluated on the financial documents in the German language and a comparative analysis of the cell embeddings' quality from the three tabular models is also presented. From the evaluation results, the experiment that used the English-translated text and table KPIs and Tabbie model to generate table KPIs’ embeddings achieved an accuracy of 72.81% on the consistency checking task, outperforming the benchmark, and other tabular models.
There has been a growing interest in taste research in the HCI and CSCW communities. However, the focus is more on stimulating the senses, while the socio-cultural aspects have received less attention. However, individual taste perception is mediated through social interaction and collective negotiation and is not only dependent on physical stimulation. Therefore, we study the digital mediation of taste by drawing on ethnographic research of four online wine tastings and one self-organized event. Hence, we investigated the materials, associated meanings, competences, procedures, and engagements that shaped the performative character of tasting practices. We illustrate how the tastings are built around the taste-making process and how online contexts differ in providing a more diverse and distributed environment. We then explore the implications of our findings for the further mediation of taste as a social and democratized phenomenon through online interaction.
When optimizing the process parameters of the acidic ethanolic organosolv process, the aim is usually to maximize the delignification and/or lignin purity. However, process parameters such as temperature, time, ethanol and catalyst concentration, respectively, can also be used to vary the structural properties of the obtained organosolv lignin, including the molecular weight and the ratio of aliphatic versus phenolic hydroxyl groups, among others. This review particularly focuses on these influencing factors and establishes a trend analysis between the variation of the process parameters and the effect on lignin structure. Especially when larger data sets are available, as for process temperature and time, correlations between the distribution of depolymerization and condensation reactions are found, which allow direct conclusions on the proportion of lignin's structural features, independent of the diversity of the biomass used. The newfound insights gained from this review can be used to tailor organosolv lignins isolated for a specific application.
Climate change is transforming the risks individuals and households face, with potentially profound socioeconomic consequences such as increased poverty, inequality, and social instability. Social protection is a policy tool that governments use to help individuals and households manage risks linked to income and livelihoods, and to achieve societal outcomes such as reducing poverty and inequality. Despite its potential as a policy response to climate change, the integration of social protection within the climate policy agenda is currently limited. While the concept of risk is key to both sectors, different understandings of the nature and scope of climate change impacts and their implications, as well as of the adequacy of social protection instruments to address them, contribute to the lack of policy and practice integration.
Our goal is to bridge this cognitive gap by highlighting the potential of social protection as a policy response to climate change. Using a comprehensive climate risk lens, we first explore how climate change drives risks that are within the realm of social protection, and their implications, including likely future trends in demand for social protection. Based on this analysis, we critically review existing arguments for what social protection can do and evidence of what it currently does to manage risks arising from climate change. From the analysis, a set of reconceptualised roles emerge for social protection to strategically contribute to climate-resilient development.
RELA haploinsufficiency is a recently described autoinflammatory condition presenting with intermittent fevers and mucocutaneous ulcerations. The RELA gene encodes the p65 protein, one of five NF-κB family transcription factors. As RELA is an essential regulator of mucosal homeostasis, haploinsufficiency leads to decreased NF-κB signaling which promotes TNF-driven mucosal apoptosis with impaired epithelial recovery. Thus far, only eight cases have been reported in the literature. Here, we report four families with three novel and one previously described pathogenic variant in RELA. These four families included 23 affected individuals for which genetic testing was available in 16. Almost half of these patients had been previously diagnosed with more common rheumatologic entities (such as Behcet's Disease; BD) prior to the discovery of their pathogenic RELA variants. The most common clinical features were orogenital ulcers, rash, joint inflammation, and fever. The least common were conjunctivitis and recurrent infections. Clinical variability was remarkable even among familial cases, and incomplete penetrance was observed. Patients in our series were treated with a variety of medications, and benefit was observed with glucocorticoids, colchicine, and TNF inhibitors. Altogether, our work adds to the current literature and doubles the number of reported cases with RELA-Associated Inflammatory Disease (RAID). It reaffirms the central importance of the NF-κB pathway in immunity and inflammation, as well as the important regulatory role of RELA in mucosal homeostasis. RELA associated inflammatory disease should be considered in all patients with BD, particularly those with early onset and/or with a strong family history.
Citizen participation is deemed to be crucial for sustainability and resilience planning. However, generational equity has been missing from recent academic discussions regarding sustainability and resilience. Therefore, the purpose of this paper is to reintroduce the topic of the existence or absence of an intergenerational consensus on the example of a rural community and its perceived brand image attributes and development priorities. The research is based on primary data collected through an online survey, with a sample size of N = 808 respondents in Neunkirchen-Seelscheid, Germany. The data were analyzed using the Kruskal–Wallis test for the presence and/or absence of consensus among the five generations regarding brand image attributes and development priorities. The findings point to divergence between what the median values indicate as the most relevant brand image attributes and development priorities among the citizens and the areas where the Kruskal–Wallis test shows that an intergenerational consensus either does or does not exist. The results imply the need for new concepts and applied approaches to citizen participation for sustainability and resilience, where intergenerational dialogue and equity-building take center stage. In addition to the importance of the theory of citizen participation for sustainability and resilience, our results provide ample evidence for how sustainability and resilience planning documents could potentially benefit from deploying the concept of intergenerational equity. The present research provides sustainability and political science with new conceptual and methodological approaches for taking intergenerational equity into account in regional planning processes in rural and other areas.
There are several recent works which had proposed an automatic computer-aided diagnosis (CAD) deep learning (DL) model to diagnose coronavirus disease 2019 (COVID-19) using chest x-ray images (CXR) to propose a high-accuracy CAD method to detect COVID-19 automatically. In this study, seven different models including Convolutional Neural Network (CNN) models such as VGG-16 and vision transformer (ViT) models, are proposed. The different proposed models are trained with a three-class balanced dataset consisting of 3,000 CXR images consisting of 1,000 CXR images for each class of COVID-19, Normal, and Lung-Opacity. A publicly available dataset to train and test the models is used from Kaggle-COVID-19-Radiography-Dataset. From the experiments, the accuracy of the VGG16 model is 93.44% and ViT's is 92.33%. Besides, the binary classification between two classes of COVID-19 and Normal CXR with a limited number of just 100 images for each class, using a transfer learning technique, with a validation accuracy of 97.5% is proposed.
Trends of environmental awareness, combined with a focus on personal fitness and health, motivate many people to switch from cars and public transport to micromobility solutions, namely bicycles, electric bicycles, cargo bikes, or scooters. To accommodate urban planning for these changes, cities and communities need to know how many micromobility vehicles are on the road. In a previous work, we proposed a concept for a compact, mobile, and energy-efficient system to classify and count micromobility vehicles utilizing uncooled long-wave infrared (LWIR) image sensors and a neuromorphic co-processor. In this work, we elaborate on this concept by focusing on the feature extraction process with the goal to increase the classification accuracy. We demonstrate that even with a reduced feature list compared with our early concept, we manage to increase the detection precision to more than 90%. This is achieved by reducing the images of 160 × 120 pixels to only 12 × 18 pixels and combining them with contour moments to a feature vector of only 247 bytes.
Rosenbrock–Wanner methods for systems of stiff ordinary differential equations are well known since the seventies. They have been continuously developed and are efficient for differential-algebraic equations of index-1, as well. Their disadvantage that the Jacobian matrix has to be updated in every time step becomes more and more obsolete when automatic differentiation is used. Especially the family of Rodas methods has proven to be a standard in the Julia package DifferentialEquations. However, the fifth-order Rodas5 method undergoes order reduction for certain problem classes. Therefore, the goal of this paper is to compute a new set of coefficients for Rodas5 such that this order reduction is reduced. The procedure is similar to the derivation of the methods Rodas4P and Rodas4P2. In addition, it is possible to provide new dense output formulas for Rodas5 and the new method Rodas5P. Numerical tests show that for higher accuracy requirements Rodas5P always belongs to the best methods within the Rodas family.
Forensic DNA profiles are established by multiplex PCR amplification of a set of highly variable short tandem repeat (STR) loci followed by capillary electrophoresis (CE) as a means to assign alleles to PCR products of differential length. Recently, CE analysis of STR amplicons has been supplemented by high-throughput next generation sequencing (NGS) techniques that are able to detect isoalleles bearing sequence polymorphisms and allow for an improved analysis of degraded DNA. Several such assays have been commercialised and validated for forensic applications. However, these systems are cost-effective only when applied to high numbers of samples. We report here an alternative, cost-efficient shallow-sequence output NGS assay called maSTR assay that, in conjunction with a dedicated bioinformatics pipeline called SNiPSTR, can be implemented with standard NGS instrumentation. In a back-to-back comparison with a CE-based, commercial forensic STR kit, we find that for samples with low DNA content, with mixed DNA from different individuals, or containing PCR inhibitors, the maSTR assay performs equally well, and with degraded DNA is superior to CE-based analysis. Thus, the maSTR assay is a simple, robust and cost-efficient NGS-based STR typing method applicable for human identification in forensic and biomedical contexts.
„Ich kann jetzt nicht krank werden – ich muss arbeiten“. Diesen Satz hat wohl jeder schon einmal gehört oder sogar selbst gesagt. Dahinter steckt das Phänomen des Präsentismus. Präsentismus wird ganz allgemein bezeichnet als behaviour of working in the state of illhealth (Ruhle et al. 2020). Der Begriff entstand in Anlehnung an sein Gegenteil, den Absentismus, welcher das Fernbleiben von der Arbeit beschreibt (Hägerbäumer 2017). Die negativen langfristigen gesundheitlichen und arbeitsbezogenen Auswirkungen des Verhaltens, trotz Krankheit zu arbeiten, sind in der Literatur gut belegt (z.B. Gustafsson/Marklund 2011). Vor allem im Home-Office, welches während der Corona-Pandemie häufig genutzt wurde und nach der Corona-Pandemie in vielen Bereichen Normalität wurde, tritt Präsentismus aufgrund der geringeren Barrieren (z.B. keine Ansteckungsgefahr, kein Pendeln) noch verstärkter auf (Steidelmüller et al. 2020). Auch bei Studierenden, die im Rahmen von Online-Lehre öfter von zu Hause aus lernen, ist davon auszugehen, dass dies den Präsentismus begünstigt. Eine Auseinandersetzung mit dem Thema ist also von großer Relevanz. Es fehlt eine strukturierte Zusammenstellung geeigneter Gegenmaßnahmen, die zur Reduzierung von Präsentismus angewendet werden können. Darüber hinaus wurde vor allem Präsentismus mit dem Schwerpunkt Hochschule und damit den Zielgruppen Hochschulmitarbeitende und Studierende bisher kaum untersucht. Diese Forschungslücke soll der vorliegende Beitrag schließen und Präsentismus an Hochschulen beschreiben sowie mithilfe eines Literaturreviews mögliche Maßnahmenbereiche aufzeigen.
Auf dem Weg zum Briefkasten zu dem Zweck, eine Arbeitsunfähigkeitsbescheinigung an den Arbeitgeber zu versenden, befinden sich Beschäftigte auf einem versicherten Betriebsweg. Dem Erstattungsanspruch der Krankenkasse wegen der Behandlungskosten nach einem Sturz steht auch die bestandskräftige Ablehnung eines Arbeitsunfalls durch den Unfallversicherungsträger nicht entgegen.
Die Maschine als Schöpferin
(2023)
Atomic oxygen is a key species in the mesosphere and thermosphere of Venus. It peaks in the transition region between the two dominant atmospheric circulation patterns, the retrograde super-rotating zonal flow below 70 km and the subsolar to antisolar flow above 120 km altitude. However, past and current detection methods are indirect and based on measurements of other molecules in combination with photochemical models. Here, we show direct detection of atomic oxygen on the dayside as well as on the nightside of Venus by measuring its ground-state transition at 4.74 THz (63.2 µm). The atomic oxygen is concentrated at altitudes around 100 km with a maximum column density on the dayside where it is generated by photolysis of carbon dioxide and carbon monoxide. This method enables detailed investigations of the Venusian atmosphere in the region between the two atmospheric circulation patterns in support of future space missions to Venus.
Dried serum spots that are well prepared can be attractive alternatives to frozen serum samples for shelving specimens in a medical or research center's biobank and mailing freshly prepared serum to specialized laboratories. During the pre-analytical phase, complications can arise which are often challenging to identify or are entirely overlooked. These complications can lead to reproducibility issues, which can be avoided in serum protein analysis by implementing optimized storage and transfer procedures. With a method that ensures accurate loading of filter paper discs with donor or patient serum, a gap in dried serum spot preparation and subsequent serum analysis shall be filled. Pre-punched filter paper discs with a 3 mm diameter are loaded within seconds in a highly reproducible fashion (approximately 10% standard deviation) when fully submerged in 10 μl of serum, named the "Submerge and Dry" protocol. Such prepared dried serum spots can store several hundred micrograms of proteins and other serum components. Serum-borne antigens and antibodies are reproducibly released in 20 μl elution buffer in high yields (approximately 90%). Dried serum spot-stored and eluted antigens kept their epitopes and antibodies their antigen binding abilities as was assessed by SDS-PAGE, 2D gel electrophoresis-based proteomics, and Western blot analysis, suggesting pre-punched filter paper discs as handy solution for serological tests.
A biodegradable blend of PBAT—poly(butylene adipate-co-terephthalate)—and PLA—poly(lactic acid)—for blown film extrusion was modified with four multi-functional chain extending cross-linkers (CECL). The anisotropic morphology introduced during film blowing affects the degradation processes. Given that two CECL increased the melt flow rate (MFR) of tris(2,4-di-tert-butylphenyl)phosphite (V1) and 1,3-phenylenebisoxazoline (V2) and the other two reduced it (aromatic polycarbodiimide (V3) and poly(4,4-dicyclohexylmethanecarbodiimide) (V4)), their compost (bio-)disintegration behavior was investigated. It was significantly altered with respect to the unmodified reference blend (REF). The disintegration behavior at 30 and 60 °C was investigated by determining changes in mass, Young’s moduli, tensile strengths, elongations at break and thermal properties. In order to quantify the disintegration behavior, the hole areas of blown films were evaluated after compost storage at 60 °C to calculate the kinetics of the time dependent degrees of disintegration. The kinetic model of disintegration provides two parameters: initiation time and disintegration time. They quantify the effects of the CECL on the disintegration behavior of the PBAT/PLA compound. Differential scanning calorimetry (DSC) revealed a pronounced annealing effect during storage in compost at 30 °C, as well as the occurrence of an additional step-like increase in the heat flow at 75 °C after storage at 60 °C. The disintegration consists of processes which affect amorphous and crystalline phase of PBAT in different manner that cannot be understood by a hydrolytic chain degradation only. Furthermore, gel permeation chromatography (GPC) revealed molecular degradation only at 60 °C for the REF and V1 after 7 days of compost storage. The observed losses of mass and cross-sectional area seem to be attributed more to mechanical decay than to molecular degradation for the given compost storage times.
Many students approaching adulthood often choose high-calorie food products. Concurrently, health interventions applied during this life phase can potentially lead to a healthier lifestyle. Nudge health interventions in experimental cafeteria settings have been found to improve eating behavior effectively, yet research in real-world settings is lacking. Accepting nudges as health interventions impacts nudge effectiveness. The present study applies a pretest–posttest design for a period of three consecutive weeks (no nudge, nudge, no nudge), testing the effectiveness of the so-called Giacometti cue on the number of calories purchased in a real-world cafeteria. Students were exposed to the nudge during the intervention week when entering the cafeteria and when choosing their meals. After purchasing a meal, their choice was recorded, and they completed a questionnaire. The Giacometti cue immediately reduced the number of calories purchased (comparing weeks one and two). After nudge removal, an effect was identified, increasing the number of calories purchased (comparing weeks two and three). Contrary to expectations, higher nudge acceptance resulted in more calories purchased. Neither awareness of the nudge’s presence when buying food nor the interaction between acceptance and awareness played a role. We explore potential explanations for the Giacometti cue’s effects.
Einleitung: Polyamorie
(2023)
Die Vorstellung, dass wir mehrere Menschen zugleich lieben können, wird in modernen, westlich geprägten Gesellschaften sowohl als fast trivialerweise wahr anerkannt, als auch als grundsätzlich verfehlt abgelehnt. Während beispielsweise kein Zweifel daran besteht, dass wir üblicherweise unsere Eltern und zeitgleich etwaige Geschwister sowie umgekehrt Eltern für gewöhnlich alle ihre Kinder lieben und wir zudem zumeist mehrere enge und tiefe Freundschaften pflegen, ist die gesellschaftlich vorherrschende Auffassung von romantischer Liebe weitgehend von der Idee geprägt, dass es sich ausschließlich um exklusive Zweierbeziehungen handeln könne. Darüber hinaus haftet allen von der romantischen exklusiven Paarbeziehung abweichenden Formen, Liebe in Beziehungskonstellationen zu leben, eine diese moralisch mindestens als implizit fragwürdig, wenn nicht sogar offen als verwerflich kennzeichnende Be- beziehungsweise Verurteilung an. Tatsächlich gibt es allerdings viele Alternativen zur Monogamie. Der vermutlich berühmtesten, der Polyamorie, widmet sich der vorliegende Schwerpunkt. Das Wort „Polyamorie“ ist ein griechisch-lateinischer Hybrid (griech. polýs, viel/mehrere; lat. amor, Liebe) und die Bezeichnung für das zeitgleiche und konsensuelle Eingehen mehrerer Liebesbeziehungen. „Polycule“ ist das englische Kunstwort für eine ganze Reihe deutscher Ausdrücke für polyamore Beziehungsmodelle wie etwa auch „konsensuell- nichtmonogames Beziehungsnetzwerk“, „Sorgegemeinschaft“, „Wahlfamilie“ oder „Polykül“. Polyamore Beziehungsmodelle sind demnach breit gefächert und können letztlich alle möglichen Beziehungskonstellationen zwischen Personen umfassen, die einander auf die eine oder andere liebende Weise nahestehen. Dieser Schwerpunkt wirft vereinzelt Schlaglichter der philosophischen und ethischen Reflexion auf einige der Fragen und Herausforderungen, die sich hinsichtlich ethischer Polyamorie stellen beziehungsweise die mit dieser Form der nichtmonogamen Beziehungspraxis und -haltung einhergehen. Unsere Autor*innen eröffnen Diskussionsräume über einige grundlegende Aspekte einer Auseinandersetzung mit dem Phänomen der Polyamorie. Damit stecken wir mit diesem Schwerpunkt das große Feld der philosophischen und ethischen Analyse rund um die Polyamorie lediglich grob ab – eine systematische und umfassende philosophische Auseinandersetzung mit dem Phänomen der Polyamorie muss an anderer Stelle erfolgen. Nichtsdestotrotz erleichtern wir mit diesem Schwerpunkt den Einstieg in die vielfältigen philosophischen und ethischen Fragen, die sich mit dem Phänomen der Polyamorie ergeben und bereiten den Grund für eine dezidierte und genaue Auseinandersetzung mit den Herausforderungen, vor die wir uns mit ihr gestellt sehen.
Cyanobacteria are gaining considerable interest as a method of supporting the long-term presence of humans on the Moon and settlements on Mars due to their ability to produce oxygen and their potential as bio-factories for space biotechnology/synthetic biology and other applications. Since many unknowns remain in our knowledge to bridge the gap and move cyanobacterial bioprocesses from Earth to space, we investigated cell division resumption on the rehydration of dried Chroococcidiopsis sp. CCMEE 029 accumulated DNA damage while exposed to space vacuum, Mars-like conditions, and Fe-ion radiation. Upon rehydration, the monitoring of the ftsZ gene showed that cell division was arrested until DNA damage was repaired, which took 48 h under laboratory conditions. During the recovery, a progressive DNA repair lasting 48 h of rehydration was revealed by PCR-stop assay. This was followed by overexpression of the ftsZ gene, ranging from 7.5- to 9-fold compared to the non-hydrated samples. Knowing the time required for DNA repair and cell division resumption is mandatory for deep-space experiments that are designed to unravel the effects of reduced/microgravity on this process. It is also necessary to meet mission requirements for dried-sample implementation and real-time monitoring upon recovery. Future experiments as part of the lunar exploration mission Artemis and the lunar gateway station will undoubtedly help to move cyanobacterial bioprocesses beyond low Earth orbit. From an astrobiological perspective, these experiments will further our understanding of microbial responses to deep-space conditions.
ESKAPEE Pathogen Biofilm Control on Surfaces with Probiotic Lactobacillaceae and Bacillus species
(2023)
Combatting the rapidly growing threat of antimicrobial resistance and reducing prevalence and transmission of ESKAPEE pathogens in healthcare settings requires innovative strategies, one of which is displacing these pathogens using beneficial microorganisms. Our review comprehensively examines the evidence of probiotic bacteria displacing ESKAPEE pathogens, with a focus on inanimate surfaces. A systematic search was conducted using the PubMed and Web of Science databases on 21 December 2021, and 143 studies were identified examining the effects of Lactobacillaceae and Bacillus spp. cells and products on the growth, colonization, and survival of ESKAPEE pathogens. While the diversity of study methods limits evidence analysis, results presented by narrative synthesis demonstrate that several species have the potential as cells or their products or supernatants to displace nosocomial infection-causing organisms in a variety of in vitro and in vivo settings. Our review aims to aid the development of new promising approaches to control pathogen biofilms in medical settings by informing researchers and policymakers about the potential of probiotics to combat nosocomial infections. More targeted studies are needed to assess safety and efficacy of different probiotic formulations, followed by large-scale studies to assess utility in infection control and medical practice.
Der Impuls von Remi Maier-Rigaud behandelt die Einführung der europäischen Gesundheitsunion als Reaktion auf die begrenzten Handlungsmöglichkeiten der Europäischen Union (EU) im Bereich der Gesundheitspolitik während der Coronapandemie. Die Gesundheitsunion wurde geschaffen, um die koordinierte Reaktion auf grenzüberschreitende Gesundheitsgefahren zu verbessern. Maier-Riguad beleuchtet im Beitrag die Vorteile einer europäischen Gesundheitspolitik, betont jedoch, dass die Frage der ausreichenden Vorbereitung auf zukünftige Gesundheitskrisen offen bleibt.
Monitoring the content of dissolved ozone in purified water is often mandatory to ensure the appropriate levels of disinfection and sanitization. However, quantification bears challenges as colorimetric assays require laborious off-line analysis, while commercially available instruments for electrochemical process analysis are expensive and often lack the possibility for miniaturization and discretionary installation. In this study, potentiometric ionic polymer metal composite (IPMC) sensors for the determination of dissolved ozone in ultrapure water (UPW) systems are presented. Commercially available polymer electrolyte membranes are treated via an impregnation-reduction method to obtain nanostructured platinum layers. By applying 25 different synthesis conditions, layer thicknesses of 2.2 to 12.6 µm are obtained. Supporting radiographic analyses indicate that the platinum concentration of the impregnation solution has the highest influence on the obtained metal loading. The sensor response behavior is explained by a Langmuir pseudo-isotherm model and allows the quantification of dissolved ozone to trace levels of less than 10 µg L−1. Additional statistical evaluations show that the expected Pt loading and radiographic blackening levels can be predicted with high accuracy and significance (R2adj. > 0.90, p < 10−10) solely from given synthesis conditions.
Indoor spaces exhibit microbial compositions that are distinctly dissimilar from one another and from outdoor spaces. Unique in this regard, and a topic that has only recently come into focus, is the microbiome of hospitals. While the benefits of knowing exactly which microorganisms propagate how and where in hospitals are undoubtedly beneficial for preventing hospital-acquired infections, there are, to date, no standardized procedures on how to best study the hospital microbiome. Our study aimed to investigate the microbiome of hospital sanitary facilities, outlining the extent to which hospital microbiome analyses differ according to sample-preparation protocol. For this purpose, fifty samples were collected from two separate hospitals—from three wards and one hospital laboratory—using two different storage media from which DNA was extracted using two different extraction kits and sequenced with two different primer pairs (V1–V2 and V3–V4). There were no observable differences between the sample-preservation media, small differences in detected taxa between the DNA extraction kits (mainly concerning Propionibacteriaceae), and large differences in detected taxa between the two primer pairs V1–V2 and V3–V4. This analysis also showed that microbial occurrences and compositions can vary greatly from toilets to sinks to showers and across wards and hospitals. In surgical wards, patient toilets appeared to be characterized by lower species richness and diversity than staff toilets. Which sampling sites are the best for which assessments should be analyzed in more depth. The fact that the sample processing methods we investigated (apart from the choice of primers) seem to have changed the results only slightly suggests that comparing hospital microbiome studies is a realistic option. The observed differences in species richness and diversity between patient and staff toilets should be further investigated, as these, if confirmed, could be a result of excreted antimicrobials.
Background: Bloodstream infections (BSIs) remain a significant cause of mortality worldwide. Causative pathogens are routinely identified and susceptibility tested but only very rarely investigated for their resistance genes, virulence factors, and clonality. Our aim was to gain insight into the clonality patterns of different species causing BSI and the clinical relevance of distinct virulence genes.
Methods: For this study, we whole-genome-sequenced over 400 randomly selected important pathogens isolated from blood cultures in our diagnostic department between 2016 and 2021. Genomic data on virulence factors, resistance genes, and clonality were cross-linked with in-vitro data and demographic and clinical information.
Results: The investigation yielded extensive and informative data on the distribution of genes implicated in BSI as well as on the clonality of isolates across various species.
Conclusion: Associations between survival outcomes and the presence of specific genes must be interpreted with caution, and conducting replication studies with larger sample sizes for each species appears mandatory. Likewise, a deeper knowledge of virulence and host factors will aid in the interpretation of results and might lead to more targeted therapeutic and preventive measures. Monitoring transmission dynamics more efficiently holds promise to serve as a valuable tool in preventing in particular BSI caused by nosocomial pathogens.
Background:
Access to electricity is one of the enabling factors for healthcare service provision. From the sustainable development perspective, an essential requirement for improving health and caring for our environment is to assure that health facilities have sufficient and reliable access to the supply of clean and sustainable energy. The objective of this work is to investigate the users’ perceptions of electricity needs and electricity sources and the way those influence different attributes and their relevance for the diffusion of renewable electricity systems in healthcare facilities.
Methods:
To identify preferences and choices, Stated Choice modelling was applied as the use of solar PV systems in health facilities is not widespread in Ghana. This method allows to present the respondents with hypothetical options, which have attributes close to the real world. Four attributes were considered, namely electricity system configuration, initial investment cost, monthly costs, and improvements to the reliability of the electricity supply.
Results:
The largest share of the 200 health facilities interviewed reported services provision as outpatient treatment, provision of maternity services and family planning, which are relatively low electricity-intensive services. However, there was a general perception that increased reliability on the electricity supply can improve the health service provision and operation of the facilities. Moreover, despite that preferences towards the solar systems, the initial investment costs of the solar systems is still perceived as preventing the adoption of this technology
Conclusion:
From this study we can conclude that health facilities in Ghana rely greatly on the national supply which has issues with reliability, compromising the delivery of healthcare services. However, the adoption of alternative electricity technologies based on renewable sources is not likely to occur at the facility level without the engagement of other actors that can help bridging the barriers for adoption, as initial investment costs.
This paper aims to assess farmers’ challenges in enhancing biodiversity. The so-called “trilemma” (WBGU 2021) of land use stems from the multiple demands made on land for the benefit of mitigating climate change, securing food, and maintaining biodiversity. Agriculture is accused of maladministration, causing soil contamination, animal cruelty, bee mortality, and climate change. However, farmers play a key role in overcoming upcoming sustainability challenges. While their supportive role is urgently needed, farmers find themselves caught between a “rock” and a ”hard place”. Consumers call for sustainable production and affordable food products without pesticide residues, demanding enough for all. Farmers are restricted by the wants and needs of consumers who are influenced by interest groups and exposed to interdependent direct and indirect influencing factors. They need to balance the scrutiny of the critical public as well as the regulatory control. In this paper, we collected and surveyed the data of farmers within or close to the 21 selected nature protected areas of the DINA (Diversity of Insects in Nature protected Areas) Project, using a mixed methods approach with a semi-structured questionnaire considering issues’ interdependencies and the complexity of today´s problems. The conflicts and obstacles faced by farmers were assessed. The results reflect the farmers’ willingness and the importance of receiving appreciation for implementing biodiversity measures. These results, complemented by a following quantitative study, are the basis for recommendations for policymakers and farmers in all German nature protected areas.
Forget it!
(2023)
A Fourier scatterometry setup is evaluated to recover the key parameters of optical phase gratings. Based on these parameters, systematic errors in the printing process of two-photon polymerization (TPP) gray-scale lithography three-dimensional printers can be compensated, namely tilt and curvature deviations. The proposed setup is significantly cheaper than a confocal microscope, which is usually used to determine calibration parameters for compensation of the TPP printing process. The grating parameters recovered this way are compared to those obtained with a confocal microscope. A clear correlation between confocal and scatterometric measurements is first shown for structures containing either tilt or curvature. The correlation is also shown for structures containing a mixture of tilt and curvature errors (squared Pearson coefficient r2 = 0.92). This compensation method is demonstrated on a TPP printer: a diffractive optical element printed with correction parameters obtained from Fourier scatterometry shows a significant reduction in noise as compared to the uncompensated system. This verifies the successful reduction of tilt and curvature errors. Further improvements of the method are proposed, which may enable the measurements to become more precise than confocal measurements in the future, since scatterometry is not affected by the diffraction limit.
What does ‘desirable’ or ‘sustainable’ mean in the context of labour migration? And what should programmes geared towards making migration more compatible with development look like? These questions provided the starting point for the ‘Sustainable Labour Migration’ research project implemented by Hochschule Bonn-Rhein-Sieg University of Applied Sciences between December 2020 and August 2022. The project looked at how sustainability in different transnational skills partnership schemes was perceived by different stakeholders in three countries chosen as case studies: Georgia, Kosovo and Vietnam. Embracing the notion of a ‘triple win’, many transnational skills partnership schemes aim to deliver benefits for their main stakeholder groups. As well as reflecting critically on this triple-win narrative, this paper also argues for a more nuanced approach in order to grasp the complexity of skilled labour migration. The paper introduces one such approach, namely the sustainable labour migration framework, and highlights the key elements of the research project. It details the methodology used in the study (systematic literature review – employer survey – semi-structured, in-depth interviews – focus group interviews) and explores the perception of sustainability in skilled labour migration with a focus on the cost/benefit ratio, the relationship between vocational education and training and labour migration, and the various arrangements for the partnerships employed in the schemes. In introducing the key findings from the three countries selected for the case studies, the paper highlights that the perception of sustainability is not underpinned by a comprehensive understanding of the term amongst most stakeholders. Within all the schemes, however, some stakeholders identified elements which make a positive contribution to development in the respective countries of origin and thus identify elements of sustainable labour migration with room for improvement in multiple areas. The paper concludes with a presentation of overall policy recommendations: The ongoing reform of Germany’s labour migration policy should be accompanied by more development-oriented activities. As part of this, the German Federal Ministry for Economic Cooperation and Development (BMZ) should stand up more forcefully for the needs of migrants and potential partner countries in order to reduce existing inequalities
Geschäftsprozess-Management
(2023)
Pursuant to Sustainable Development Goal (SDG) 15 of the 2030 Agenda for Sustainable Development of the United Nations, one pivotal target is to halt biodiversity loss. This paper’s objective is to analyze why and how German farmers hesitate to implement more than the prescriptive measures with regard to cross compliance and direct payments under the European Common Agricultural Policy (CAP) and what their aspirations are for possible incentives to bring biodiversity into focus. By applying a mixed methods approach, we investigate the experience of individual farmers by means of a qualitative approach followed by a quantitative study. This analysis sheds light on how farmers perceive indirect influencing factors and how these factors play a non-negligible role in farmers´ commitment to biodiversity. Economy, policy and society are intertwined and need to be considered from a multi-faceted perspective. In addition, an in-depth analysis is conducted based on online focus group discussions to determine whether farmers accept financial support, focusing on both action- and success-oriented payments. Our results highlight the importance of paying attention to the heterogeneity of farmers, their locations and, consequently, farmers’ different views on indirect drivers influencing agricultural processes, showing the complexity of the problem. Although farmers’ expectations can be met with financial allocations, other aspects must also be taken into account.
Estimates of global horizontal irradiance (GHI) from reanalysis and satellite-based data are the most important information for the design and monitoring of PV systems in Africa, but their quality is unknown due to the lack of in situ measurements. In this study, we evaluate the performance of hourly GHI from state-of-the-art reanalysis and satellite-based products (ERA5, CAMS, MERRA-2, and SARAH-2) with 37 quality-controlled in situ measurements from novel meteorological networks established in Burkina Faso and Ghana under different weather conditions for the year 2020. The effects of clouds and aerosols are also considered in the analysis by using common performance measures for the main quality attributes and a new overall performance value for the joint assessment. The results show that satellite data performs better than reanalysis data under different atmospheric conditions. Nevertheless, both data sources exhibit significant bias of more than 150 W/m2 in terms of RMSE under cloudy skies compared to clear skies. The new measure of overall performance clearly shows that the hourly GHI derived from CAMS and SARAH-2 could serve as viable alternative data for assessing solar energy in the different climatic zones of West Africa.
This study addresses the underrepresentation of women and the so-far neglected process perspective in empirical entrepreneurial research. It aims to identify the personality traits that differentiate successful female entrepreneurs from their less successful peers and to determine which traits are crucial for pre-launch, launch, and post-launch success. Independent t-tests on 305 female entrepreneurs (and 476 male entrepreneurs) from the DACH region highlight the role of self-efficacy, proactivity, locus of control, and need for achievement for female entrepreneurs. Multiple regression analyses further reveal the importance of self-efficacy for every phase of women’s entrepreneurial journey. While the need for autonomy was critical during pre-launch and launch, locus of control significantly predicted female entrepreneurial success in the pre-launch and post-launch phases. Contrary to previous research, risk-taking was not a crucial trait for female entrepreneurs when compared to their male counterparts, while both showed similar levels of need for autonomy, proactivity, need for achievement, perseverance, self-control, and locus of control. The study offers valuable insights into successful entrepreneurship and highlights the need for female- and phase-specific support programs to enhance self-efficacy among female entrepreneurs.
Improving insect conservation management through insect monitoring and stakeholder involvement
(2023)
In recent years, the decline of insect biodiversity and the imminent loss of provided ecosystem functions and services has received public attention and raised the demand for political action. The complex, multi-causal contributors to insect decline require a broad interdisciplinary and cross-sectoral approach that addresses ecological and social aspects to find sustainable solutions. The project Diversity of Insects in Nature protected Areas (DINA) assesses insect communities in 21 nature reserves in Germany, and considers interactions with plant diversity, pesticide exposure, spatial and climatic factors. The nature reserves border on agricultural land, to investigate impacts on insect diversity. Part of the project is to obtain scientific data from Malaise traps and their surroundings, while another part involves relevant stakeholders to identify opportunities and obstacles to insect diversity conservation. Our results indicate a positive association between insect richness and biomass. Insect richness was negatively related to the number of stationary pesticides (soil and vegetation), pesticides measured in ethanol, the amount of area in agricultural production, and precipitation. Our qualitative survey along with stakeholder interviews show that there is general support for insect conservation, while at the same time the stakeholders expressed the need for more information and data on insect biodiversity, as well as flexible policy options. We conclude that conservation management for insects in protected areas should consider a wider landscape. Local targets of conservation management will have to integrate different stakeholder perspectives. Scientifically informed stakeholder dialogues can mediate conflicts of interests, knowledge, and values to develop mutual conservation scenarios.
In memoriam Willy Lehnert
(2023)
Solar photovoltaic power output is modulated by atmospheric aerosols and clouds and thus contains valuable information on the optical properties of the atmosphere. As a ground-based data source with high spatiotemporal resolution it has great potential to complement other ground-based solar irradiance measurements as well as those of weather models and satellites, thus leading to an improved characterisation of global horizontal irradiance. In this work several algorithms are presented that can retrieve global tilted and horizontal irradiance and atmospheric optical properties from solar photovoltaic data and/or pyranometer measurements. The method is tested on data from two measurement campaigns that took place in the Allgäu region in Germany in autumn 2018 and summer 2019, and the results are compared with local pyranometer measurements as well as satellite and weather model data. Using power data measured at 1 Hz and averaged to 1 min resolution along with a non-linear photovoltaic module temperature model, global horizontal irradiance is extracted with a mean bias error compared to concurrent pyranometer measurements of 5.79 W m−2 (7.35 W m−2) under clear (cloudy) skies, averaged over the two campaigns, whereas for the retrieval using coarser 15 min power data with a linear temperature model the mean bias error is 5.88 and 41.87 W m−2 under clear and cloudy skies, respectively.
During completely overcast periods the cloud optical depth is extracted from photovoltaic power using a lookup table method based on a 1D radiative transfer simulation, and the results are compared to both satellite retrievals and data from the Consortium for Small-scale Modelling (COSMO) weather model. Potential applications of this approach for extracting cloud optical properties are discussed, as well as certain limitations, such as the representation of 3D radiative effects that occur under broken-cloud conditions. In principle this method could provide an unprecedented amount of ground-based data on both irradiance and optical properties of the atmosphere, as long as the required photovoltaic power data are available and properly pre-screened to remove unwanted artefacts in the signal. Possible solutions to this problem are discussed in the context of future work.
Das Interesse an Virtual Reality (VR) für die Hochschullehre steigt aktuell vermehrt durch die Möglichkeit, logistisch schwierige Aufgaben abzubilden sowie aufgrund positiver Ergebnisse aus Wirksamkeitsstudien. Gleichzeitig fehlt es jedoch an Studien, die immersive VR-Umgebungen, nicht-immersive Desktop-Umgebungen und konventionelle Lernmaterialien gegenüberstellen und lehr-lernmethodische Aspekte evaluieren. Aus diesem Grund beschäftigt sich dieser Beitrag mit der Konzeption und Realisierung einer Lernumgebung für die Hochschullehre, die sowohl mit einem Head Mounted Display (HMD) als auch mittels Desktops genutzt werden kann, sowie deren Evaluation anhand eines experimentellen Gruppendesigns. Die Lernumgebung wurde auf Basis einer eigens entwickelten Softwareplattform erstellt und die Wirksamkeit mithilfe von zwei Experimentalgruppen – VR vs. Desktop-Umgebung – und einer Kontrollgruppe evaluiert und verglichen. In einer Pilotstudie konnten sowohl qualitativ als auch quantitativ positive Einschätzungen der Usability der Lernumgebung in beiden Experimentalgruppen herausgestellt werden. Darüber hinaus zeigten sich positive Effekte auf die kognitive und affektive Wirkung der Lernumgebung im Vergleich zu konventionellen Lernmaterialien. Unterschiede zwischen der Nutzung als VR- oder Desktop-Umgebung zeigen sich auf kognitiver und affektiver Ebene jedoch kaum. Die Analyse von Log-Daten deutet allerdings auf Unterschiede im Lern- und Explorationsverhalten hin.
INTRODUCTION: The cardiac magnetic resonance (CMR) data on mid- to long-term myocardial damage due to COVID-19 infections in elite athletes are scarce. Therefore, this study investigated the mid -to long-term consequences of myocardial involvement after a COVID-19 infection in elite athletes.
MATERIALS AND METHODS: This study included 27 athletes at the German Olympic Centre North Rhine-Westphalia (NRW)/Rhineland with a confirmed previous COVID-19 infection between January 2020 and October 2021. The athletes were part of an ongoing observational COVID-19 study at the Institute of Cardiology and Sports Medicine Cologne at the German Sport University (DSHS).Nine healthy non-athletes with no prior COVID-19 illness served as controls. CMR was performed within a mean of 182 days (standard deviation [SD] 99) of the initial positive test result.
RESULTS: CMR did not reveal any signs of acute myocarditis (according to the current Lake Louise criteria) or myocardial damage in any of the 26 elite athletes with previous COVID-19 infection. Of these athletes, 92% experienced a symptomatic course, and 54% reported symptoms lasting for more than 4 weeks. One male athlete was excluded from the analysis because CMR revealed an arrhythmogenic right ventricular cardiomyopathy (ARVC). Athletes had significantly enlarged left and right ventricle volumes and increased left ventricular myocardial mass in comparison to the healthy control group (LVEDVi 103.4 vs 91.1 ml/m2, p = 0.031; RVEDVi 104.1 vs 86.6 ml/m2, p = 0.007; LVMi 59.0 vs 46.2 g/m2, p = 0.002). Only two cases of elevated high-sensitivity-Troponin were documented; in one, the participant had previously engaged in high-intensity training, and in the other, CMR revealed a diagnosis of an arrhythmogenic cardiomyopathy.
CONCLUSION: Our findings suggest that the risk for mid- to long-term myocardial damage is very low to negligible in elite athletes. Our results do not allow conclusions to be drawn regarding myocardial injury in the acute phase of infection nor about possible long-term myocardial effects in the general population.
The perceptual upright results from the multisensory integration of the directions indicated by vision and gravity as well as a prior assumption that upright is towards the head. The direction of gravity is signalled by multiple cues, the predominant of which are the otoliths of the vestibular system and somatosensory information from contact with the support surface. Here, we used neutral buoyancy to remove somatosensory information while retaining vestibular cues, thus "splitting the gravity vector" leaving only the vestibular component. In this way, neutral buoyancy can be used as a microgravity analogue. We assessed spatial orientation using the oriented character recognition test (OChaRT, which yields the perceptual upright, PU) under both neutrally buoyant and terrestrial conditions. The effect of visual cues to upright (the visual effect) was reduced under neutral buoyancy compared to on land but the influence of gravity was unaffected. We found no significant change in the relative weighting of vision, gravity, or body cues, in contrast to results found both in long-duration microgravity and during head-down bed rest. These results indicate a relatively minor role for somatosensation in determining the perceptual upright in the presence of vestibular cues. Short-duration neutral buoyancy is a weak analogue for microgravity exposure in terms of its perceptual consequences compared to long-duration head-down bed rest.
The cystic fibrosis transmembrane conductance regulator (CFTR) anion channel and the epithelial Na+ channel (ENaC) play essential roles in transepithelial ion and fluid transport in numerous epithelial tissues. Inhibitors of both channels have been important tools for defining their physiological role in vitro. However, two commonly used CFTR inhibitors, CFTRinh-172 and GlyH-101, also inhibit non-CFTR anion channels, indicating they are not CFTR specific. However, the potential off-target effects of these inhibitors on epithelial cation channels has to date not been addressed. Here, we show that both CFTR blockers, at concentrations routinely employed by many researchers, caused a significant inhibition of store-operated calcium entry (SOCE) that was time-dependent, poorly reversible and independent of CFTR. Patch clamp experiments showed that both CFTRinh-172 and GlyH-101 caused a significant block of Orai1-mediated whole cell currents, establishing that they likely reduce SOCE via modulation of this Ca2+ release-activated Ca2+ (CRAC) channel. In addition to off-target effects on calcium channels, both inhibitors significantly reduced human αβγ-ENaC-mediated currents after heterologous expression in Xenopus oocytes, but had differential effects on δβγ-ENaC function. Molecular docking identified two putative binding sites in the extracellular domain of ENaC for both CFTR blockers. Together, our results indicate that caution is needed when using these two CFTR inhibitors to dissect the role of CFTR, and potentially ENaC, in physiological processes.
Pitfalls of using sequence databases for heterologous expression studies - a technical review
(2023)
Synthesis of DNA fragments based on gene sequences available in public resources has become an efficient and affordable method that gradually replaced traditional cloning efforts such as PCR cloning from cDNA. However, database entries based on genome sequencing results are prone to errors which can lead to false sequence information and, ultimately, errors in functional characterization of proteins such as ion channels and transporters in heterologous expression systems. We have identified five common problems that repeatedly appear in public resources: 1) Not every gene has yet been annotated; 2) Not all gene annotations are necessarily correct; 3) Transcripts may contain automated corrections; 4) There are mismatches between gene, mRNA, and protein sequences; and 5) Splicing patterns often lack experimental validation. This technical review highlights and provides a strategy to bypass these issues in order to avoid critical mistakes that could impact future studies of any gene/protein of interest in heterologous expression systems. Abstract figure legend Projects involving heterologous gene expression are often characterised by similar steps. Initially, database research (A) is necessary to retrieve information of full of partial sequences of a gene of interest. A multitude of genome assemblies are annotated and deposited in public databases or that are available for refined search options using individual sequence information. The search results need to be scrutinised and compared to already available information (B). Once the sequence has been determined, DNA synthesis (C) by PCR or commercial synthesis are necessary for further cloning procedures (D). Eventually, the DNA needs to be transfected (E) and expressed in, e.g., eukaryotic cells (F). Finally, the expression of the gene of interest needs to be documented and its function analysed (G). This article is protected by copyright. All rights reserved.
Polyamorie und Ethik
(2023)
„Polyamorie“ ist die Bezeichnung für das explizite und konsensuelle Eingehen mehrerer Liebesbeziehungen zur selben Zeit. Mit polyamoren Konstellationen korreliert, dafür wird in diesem Beitrag argumentiert, eine Ethik der Beziehungsgestaltung und sie schließen darüber hinaus für gewöhnlich das Teilen äquivalenter gesellschaftspolitischer Prämissen ein, auf die im Folgenden an einigen Stellen hingewiesen wird. Eine Ethik der Polyamorie umfasst zwei Eigenschaften: Polyethiken brechen zum einen mit dem traditionellen Verständnis vom Individuum oder Handlungssubjekt. Ich werde zeigen, dass polyamoren Beziehungsnetzwerken und der Ethik, die in ihnen idealiter gelebt wird, ein relationales Denken zugrunde liegt. Zum anderen zeichnen sich Polyethiken durch ein besonderes Augenmerk auf die Beziehungen, die als poly bezeichnet werden können, aus, in denen typischerweise eine Reihe von Werten realisiert werden. Zuvor gilt es allerdings, das Verständnis von Liebe zu definieren, das nach meinem Verständnis einem Polycule bzw. polyamoren Beziehungsnetzwerken im Allgemeinen zugrunde liegt.
Microbiome analyses are essential for understanding microorganism composition and diversity, but interpretation is often challenging due to biological and technical variables. DNA extraction is a critical step that can significantly bias results, particularly in samples containing a high abundance of challenging-to-lyse microorganisms. Taking into consideration the distinctive microenvironments observed in different bodily locations, our study sought to assess the extent of bias introduced by suboptimal bead-beating during DNA extraction across diverse clinical sample types. The question was whether complex targeted extraction methods are always necessary for reliable taxonomic abundance estimation through amplicon sequencing or if simpler alternatives are effective for some sample types. Hence, for four different clinical sample types (stool, cervical swab, skin swab, and hospital surface swab samples), we compared the results achieved from extracting targeted manual protocols routinely used in our research lab for each sample type with automated protocols specifically not designed for that purpose. Unsurprisingly, we found that for the stool samples, manual extraction protocols with vigorous bead-beating were necessary in order to avoid erroneous taxa proportions on all investigated taxonomic levels and, in particular, false under- or overrepresentation of important genera such as Blautia, Faecalibacterium, and Parabacteroides. However, interestingly, we found that the skin and cervical swab samples had similar results with all tested protocols. Our results suggest that the level of practical automation largely depends on the expected microenvironment, with skin and cervical swabs being much easier to process than stool samples. Prudent consideration is necessary when extending the conclusions of this study to applications beyond rough estimations of taxonomic abundance.
Psychische Beeinträchtigungen nach Arbeitsunfällen – Probleme der Rechtsanwendung und Begutachtung
(2023)
Risk-based authentication (RBA) aims to protect users against attacks involving stolen passwords. RBA monitors features during login, and requests re-authentication when feature values widely differ from those previously observed. It is recommended by various national security organizations, and users perceive it more usable than and equally secure to equivalent two-factor authentication. Despite that, RBA is still used by very few online services. Reasons for this include a lack of validated open resources on RBA properties, implementation, and configuration. This effectively hinders the RBA research, development, and adoption progress.
To close this gap, we provide the first long-term RBA analysis on a real-world large-scale online service. We collected feature data of 3.3 million users and 31.3 million login attempts over more than 1 year. Based on the data, we provide (i) studies on RBA’s real-world characteristics plus its configurations and enhancements to balance usability, security, and privacy; (ii) a machine learning–based RBA parameter optimization method to support administrators finding an optimal configuration for their own use case scenario; (iii) an evaluation of the round-trip time feature’s potential to replace the IP address for enhanced user privacy; and (iv) a synthesized RBA dataset to reproduce this research and to foster future RBA research. Our results provide insights on selecting an optimized RBA configuration so that users profit from RBA after just a few logins. The open dataset enables researchers to study, test, and improve RBA for widespread deployment in the wild.
The decline of insect abundance and richness has been documented for decades and has received increased attention in recent years. In 2017, a study by Hallmann and colleagues on insect biomasses in German nature protected areas received a great deal of attention and provided the impetus for the creation of the project Diversity of Insects in Nature protected Areas (DINA). The aim of DINA was to investigate possible causes for the decline of insects in nature protected areas throughout Germany and to develop strategies for managing the problem.
A major issue for the protection of insects is the lack of insect-specific regulations for nature protected areas and the lack of a risk assessment and verification of the measures applied. Most nature protected areas border on or enclose agricultural land and are structured in a mosaic, resulting in an abundance of small and narrow areas. This leads to fragmentation or even loss of endangered habitats and thus threaten biodiversity. In addition, the impact of agricultural practices, especially pesticides and fertilisers, leads to the degradation of biodiversity at the boundaries of nature protected areas, reducing their effective size. All affected stakeholders need to be involved in solving these threats by working on joint solutions. Furthermore, agriculture in and around nature protected areas must act to promote biodiversity and utilise and develop methods that reverse the current trend. This also requires subsidies from the state to ensure economic sustainability and promote biodiversity-promoting practices.
The epithelial sodium channel (ENaC) is a key regulator of sodium homeostasis that contributes to blood pressure control. ENaC open probability is adjusted by extracellular sodium ions, a mechanism referred to as sodium self-inhibition (SSI). With a growing number of identified ENaC gene variants associated with hypertension, there is an increasing demand for medium- to high-throughput assays allowing the detection of alterations in ENaC activity and SSI. We evaluated a commercially available automated two-electrode voltage-clamp (TEVC) system that records transmembrane currents of ENaC-expressing Xenopus oocytes in 96-well microtiter plates. We employed guinea pig, human and Xenopus laevis ENaC orthologs that display specific magnitudes of SSI. While demonstrating some limitations over traditional TEVC systems with customized perfusion chambers, the automated TEVC system was able to detect the established SSI characteristics of the employed ENaC orthologs. We were able to confirm a reduced SSI in a gene variant, leading to C479R substitution in the human α-ENaC subunit that has been reported in Liddle syndrome. In conclusion, automated TEVC in Xenopus oocytes can detect SSI of ENaC orthologs and variants associated with hypertension. For precise mechanistic and kinetic analyses of SSI, optimization for faster solution exchange rates is recommended.
This work presents an open source database with suitable retention parameters for prediction and simulation of GC separations and gives a short introduction to three common retention models. Useful computer simulations play an important role to save resources and time in method development in GC. Thermodynamic retention parameters for the ABC model and the K-centric model are determined by isothermal measurements. This standardized procedure of measurements and calculations, presented in this work, have a useful benefit for all chromatographers, analytical chemists, and method developers because it can be used in their own laboratories to simplify the method development. The main benefits as simulations of temperature-programed GC separations are demonstrated and compared to measurements. The observed deviations of predicted retention times are in most cases less than 1%. The database includes more than 900 entries with a large range of compounds such as VOCs, PAHs, FAMEs, PCBs, or allergenic fragrances over 20 different GC columns.
The French–Italian Concordia Research Station, situated on the Antarctic Polar Plateau at an elevation of 3233 m above sea level, offers a unique opportunity to study the presence and variation of microbes introduced by abiotic or biotic vectors and, consequently, appraise the amplitude of human impact in such a pristine environment. This research built upon a previous work, which explored microbial diversity in the surface snow surrounding the Concordia Research Station. While that study successfully characterized the bacterial assemblage, detecting fungal diversity was hampered by the low DNA content. To address this knowledge gap, in the present study, we optimized the sampling by increasing ice/snow collected to leverage the final DNA yield. The V4 variable region of the 16S rDNA and Internal Transcribed Spacer (ITS1) rDNA was used to evaluate bacterial and fungal diversity. From the sequencing, we obtained 3,352,661 and 4,433,595 reads clustered in 930 and 3182 amplicon sequence variants (ASVs) for fungi and bacteria, respectively. Amplicon sequencing revealed a predominance of Basidiomycota (49%) and Ascomycota (42%) in the fungal component; Bacteroidota (65.8%) is the main representative among the bacterial phyla. Basidiomycetes are almost exclusively represented by yeast-like fungi. Our findings provide the first comprehensive overview of both fungal and bacterial diversity in the Antarctic Polar Plateau’s surface snow/ice near Concordia Station and to identify seasonality as the main driver of microbial diversity; we also detected the most sensitive microorganisms to these factors, which could serve as indicators of human impact in this pristine environment and aid in planetary protection for future exploration missions.
The Concordia Research Station provides a unique location for preparatory activities for future human journey to Mars, to explore microbial diversity at subzero temperatures, and monitor the dissemination of human-associated microorganisms within the pristine surrounding environment. Amplicon sequencing was leveraged to investigate the microbial diversity of surface snow samples collected monthly over a two-year period, at three distances from the Station (10, 500, and 1000 m). Even when the extracted total DNA was below the detection limit, 16S rRNA gene sequencing was successfully performed on all samples, while 18S rRNA was amplified on 19 samples out of 51. No significant relationships were observed between microbial diversity and seasonality (summer or winter) or distance from the Concordia base. This suggested that if present, the anthropogenic impact should have been below the detectable limit. While harboring low microbial diversity, the surface snow samples were characterized by heterogeneous microbiomes. Ultimately, our study corroborated the use of DNA sequencing-based techniques for revealing microbial presence in remote and hostile environments, with implications for Planetary Protection during space missions and for life-detection in astrobiology relevant targets.
Introduction: As historically verified, countries with comprehensive, well designed social protection systems in place are better prepared to cope with large scale catastrophes of all kinds, always in such situation there is still a need for government interventions other than social protection and larger scale discretionary social protection or related interventions. Objective: The article presents the actions of countries to minimize the negative social effects of the COVID-19 coronavirus pandemic. The text is an attempt to answer how social security systems should be adapted to aforementioned crisis? Materials and methods: The text uses research methods such as: literature criticism and statistical analysis of data and revision of implemented state intervention policies based on reports of Organisation for Economic Cooperation and Development, International Labour Organizaton, European Foundation for the Improvement of Living and Working Conditions and International Monetary Fund. Results: 1) For social security institutions of key importance to ensure continuity of operations of all services – of contributory social insurance as well of social assistance - was to ensure continuous payment of all benefits due and quick response to the new entitlement emerging. It is also necessary to ensure that all citizens are fully insured, regardless of the form of contract under which they perform work. 2) In many countries, special emergency measures that extended coverage and increased benefits were taken by governments without clearly identifying the sources of funding and very often burdening social security funds with non-statutory expenses and affecting their long-term financial sustainability. 3) In the longer run, there is a need to ensure universal health care coverage of the adequate quality, there is a need to develop policies which will secure at least minimum income security to all – independently of their labour market status, forms of employment, sex, ethnicity or nationality.
The development of whole-genome amplification (WGA) techniques has opened up new avenues for genetic analysis and genome research, in particular by facilitating the genome-wide analysis of few or even single copies of genomic DNA, such as from single cells (prokaryotic or eukaryotic) or virions. Using WGA, the few copies of genomic DNA obtained from such entities are unspecifically amplified using PCR or PCR-related processes in order to obtain higher DNA quantities that can then be successfully analysed further.
Spektroskopische Qualifizierung und Quantifizierung von Hyaluronsäure in Nahrungsergänzungsmitteln
(2023)
This research studies in detail four different assays, namely DPPH (2,2-diphenyl-1-picrylhydrazyl), ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)), FRAP (ferric ion reducing antioxidant potential) and FC (Folin-Ciocalteu), to determine the antioxidant capacity of standard substances as well as 50 organosolv lignins, and two kraft lignins. The coefficient of variation was determined for each method and was lowest for ABTS and highest for DPPH. The best correlation was found for FRAP and FC, which both rely on a single electron transfer mechanism. A good correlation between ABTS, FRAP and FC, respectively, could be observed, even though ABTS relies on a more complex reaction mechanism. The DPPH assay merely correlates with the others, implying that it reflects different antioxidative attributes due to a different reaction mechanism. Lignins obtained from paulownia and silphium have been investigated for the first time regarding their antioxidant capacity. Paulownia lignin is in the same range as beech wood lignin, while silphium lignin resembles wheat straw lignin. Miscanthus lignin is an exception from the grass lignins and possesses a significantly higher antioxidant capacity. All lignins possess a good antioxidant capacity and thus are promising candidates for various applications, e. g. as additives in food packaging or for biomedical purposes.
The purpose of this study is to extend previous research on brand innovation by uncovering the process of family winery branding in relation to the new product launch in the VUCA market on the case of three Serbian wineries. The study deploys qualitative oriented and empirical approach in presenting a multi-case study. Three semi-structured telephone interviews were conducted with owners and/or managers in these three wineries. The results demonstrate that all three family wineries are offering high-end product for the domestic market with smaller one still experimenting with strategic direction of innovating for high-end market while the two larger ones putting focus either on autochthonous grape varieties with eye-cathicng labels or authentic brand identity with strong storytelling. Another important aspect identified is the frugal nature of product launch in the family wineries due to limited resources. The paper presents is among only few studies on new product development in wine business literature.